• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.11
• /
• pp.16-24
• /
• 1997

In order to prevent the presence of the residual phase difference at the discriminator output by the existing AFC techniques, we propose a new automatic frequency control(AFC) tracking algorithm for QPSK demodulation at the digital direct broadcasting satellite(DBS) receiver, which we call a rotational decision-directed AFC(RDDAFC). The RDDAFC rotates the decision boundary for the kth received symbol by the frequency deterctor output of the (k-1)th received symbol. Tracking performances of carrier frequency offset by the proposed RDDAFC algorithm are evaluated through computer simulations under the practical DBS channel conditions with a carrier frequency offset of 2.3MHz when S/N equals 2dB. Test results show that the total pull-in time of the RDDAFC is 1.697msec for 10$^{-3}$ SER before forwared error correction at the receiver.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.2
• /
• pp.272-278
• /
• 2017

In this paper, we consider a single-channel amplitude comparison monopulse system(SCACMS). The monopulse ratio curve(MR-C) of the SCACMS can be controlled by an amplitude difference between sum and different signal, a phase difference and the coefficient of the signal processor. We first propose the SCACMS with multiple variables, and then apply a genetic algorithm to optimize the multiple variables in terms of minimizing a root mean square error. The simulation results show that when three variables of the SCACMS are jointly optimized, the linear region of the MR-C can be extended approximately 187 % compared to that of two variables.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1995.06a
• /
• pp.63-67
• /
• 1995

This paper proposes a new frequency offset correction technique for OFDM receivers on a frequency-selective fading channel. The frequency offset in the OFDM signals is known to introduce an interchannel interference among the multiple subcarriers, which degrades the receiver performance severely. In order to reduce the frequency offset, this paper describes an algorithm with two stages: acquisition and tracking. At both stages the algorithm oversamples the received OFDM signals. At the acquisition stage the frequency offset is reduced to half or less than the intercarrier spacing by matching the sign patterns of even and odd samples. Next, at tracking stage the frequency offset is compensated by a frequency detector which is controlled by the correlation of the even and odd sample sets. From the results, it is found that the proposed algorithm can correct the frequency offset even if the initial offset exceeds one half of th eintercairrers spacing.

• 한국가시화정보학회:학술대회논문집
• /
• 2006.12a
• /
• pp.113-116
• /
• 2006

AC-electroosmosis is one of the electrokinetic forces leading to phenomena peculiar in the microfluidics. This paper shows particle deformation in the microchannel with rectangular electrodes on the bottom wall for the AC-electroosmotic flows. We make a PDMS microchannnel with ITO electrodes To measure velocity distributions of the particles we used a three-dimensional particle tracking velocimetry (micro-PTV) technique this method is Particle tracking by interpolation the diffraction pattern ring diameter variations with the defocusing distances of base particle locations. we induce a function of frequency at the electrode. We find the velocity of particles is the most at the edge of the electrodes and Particles move to side wall or center of the channel for the bottom and middle.

• Korean Journal of Organic Agriculture
• /
• v.16 no.3
• /
• pp.275-286
• /
• 2008

This paper examines the impact of reliability on consumers' demand for environmentally friendly agricultural products using ordered logit model. We survey 100 housewives living in the capital region and five metropolitian cities cross sectional data in 2007. This paper especially estimates the impact of instrumental factor, such as history tracking system, provision of information, safety assurance and labelling of brands on the consumers' demand. The main results show that provision of information and safety assurance affect consumers' demand more confident than others. In order to motivate consumers to buy more environmentally friendly agricultural products, the safety should be assured and more information on production and marketing channel should be labelled.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2215-2222
• /
• 2010

A Wireless Access for Vehicular Environment (WAVE) system based on Orthogonal Frequency Division Multiplexing (OFDM) is made for vehicle to vehicle wireless communications. The physical layer standard of the WAVE system is very similar to that of the IEEE802.11a wireless local area network (WLAN). Therefore, the performance of the WAVE system is degraded by continual channel variation in the WAVE multipath fading channels after starting initial channel estimation. In this paper, we research the performance improvement of equalization in 64 Quadrature Amplitude Modulation (QAM) transmission in WAVE environment. The proposed algorithms use the training sequence and the midamble sequence which is used for fast channel variation such as WAVE environments. Additionally, various interpolation methods are also used for the channel tracking.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10b
• /
• pp.412-414
• /
• 2001

In this paper, we describe an real-time facial feature tracker. We only used a general USB PC Camera without a frame grabber. The system has achieved a rate of 8+ frames/second without any low-level library support. It tracks pupils, nostrils and corners of the lip. The signal from USB Camera is YUV 4:2:0 vertical Format. we converted the signal into RGB color model to display the image and We interpolated V channel of the signal to be used for extracting a facial region. and we analysis 2D blob features in the Y channel, the luminance of the image with geometric restriction to locate each facial feature within the detected facial region. Our method is so simple and intuitive that we can make the system work in real-time.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.6 s.237
• /
• pp.687-695
• /
• 2005

On the notion that the Reynolds stresses are transported with different time scale depending on the transport direction, the third order velocity correlations are represented by a new turbulent gradient transport model with tonsorial Lagrangian time scale. In order to verify the proposed model, DNS data are first obtained in a turbulent channel flow at Re = 180 and tonsorial Lagrangian time scales are computed. The present model predictions are compared with DNS data and those predicted by the third-order turbulent transport model of Hanjalic and Launder that uses a scalar time scale. The result demonstrates that the Reynolds stresses are indeed transported with different time scale depending on the transport direction.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.472-473
• /
• 2008

Flow boiling in parallel microchannels has received attention as an effective heat sink mechanism for power-densities encountered in microelectronic equipment. the bubble dynamics coupled with boiling heat transfer in microchannels is still not well understood due to the technological difficulties in obtaining detailed measurements of microscale two-phase flows. In this study, complete numerical simulation is performed to further clarify the dynamics of flow boiling in microchannels. The level set method for tracking the liquid-vapor interface is modified to include the effects of phase change and contact angle. The method is further extended to treat the no-slip and contact angle conditions on the immersed solid. Also, the reverse flow observed during flow boiling in parallel microchannels has been investigated. Based on the numerical results, the effects of channel shape and inlet area restriction on the bubble growth, reverse flow and heat transfer are quantified.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.97-100
• /
• 2001

This paper introduces that it minimizes interference between links at high speed trajectory tracking of 2-degree parallel link robot. And in spite of system uncertainty, it introduces controller design method which is satisfied with performance specification. To do these, we separate two channels from parallel link robot through ICD(Individual Channel Design) and design controller of each channel using QFT(Quantitative Feedback Theory). Finally, we make sure of robustness and excellence of QFT control1er through simulation and experiment.