• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.778-781
• /
• 2021

In this paper, we propose the 16-layer 3D NAND Flash memory compact modeling using SPICE. In the same structure and simulation conditions, the channel potential about Down Coupling Phenomenon(DCP) and Natural Local Self Boosting (NLSB) were simulated and analyzed with Technology Computer Aided Design(TCAD) tool Atlas(Silvaco^TM) and SPICE, respectively. As a result, it was confirmed that the channel potential of TCAD and SPICE for the two phenomena were almost same. The SPICE can be checked the device structure intuitively by using netlist. Also, its simulation time is shorter than TCAD. Therefore, using SPICE can be expected to efficient research on 3D NAND Flash memory.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1924-1926
• /
• 2001

A novel wet release process ($\mu$ CARP - Micro Channel Assisted Release Process) for releasing an extreme large-area plate structure without etching hole is proposed and experimented. Etching holes in conventional process reduce a effective area and degrade an optical characteristics by a diffraction. In addition, as the area of a released structure increases, the stietion becomes more serious. The proposed process resolves these problems by the introduction of a micro fluidic channel beneath the structure which will be released. In this paper, a 5 mm${\times}$5mm-single crystal silicon plate structure was released by the proposed $\mu$CARP without etch holes on the structure. The variation in etching time with respect to the of the introduced micro channel is also examined. This process is expected to be beneficial for the actuator of a nano-scale data storage and the scanning mirror.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.135-140
• /
• 2001

This study was developed high-quality a large size precast channel structure using polymer concrete to improve quality of the product as well as to enhance construction quality. Precast PC represent the fastest growing segment of the polymer concrete industry. The fast curing, high strength, and low impermeability permit thin section and rapid reuse of moulds. Developed precast channel structure will be structural experiment and analysis. Also, through an example to construct will be develop the most suitable section survey and make practicable.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.157-160
• /
• 2002

This study was developed high-quality a large size precast channel structure using polymer concrete to improve quality of the product as well as to enhance construction quality. Practical precast channel structure design and manufacture procedure for the high polymer concrete were described in this paper. Precast PC represent the fastest growing segment of the polymer concrete industry. The fast curing, high strength, and low impermeability permit thin section and rapid reuse of moulds. Precast channel structure will carry out structural experiment and analysis.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.1
• /
• pp.66-75
• /
• 2007

In this paper, we have propose a preamble structure and synchronization/channel estimation method for UWB-MIMO which has 960Mbps transmit rate. The proposed structure is a compatible preamble structure for synchronization/channel estimation used by MIMO in MB-OFDM(Multi-Band OFDM) systems that are one of the standard systems of MBOA. The system is compatible with MB-OFDM using the proposed preamble structure. In this paper, we argue the problem in receiver part used by MIMO technique. And we simulate the proposed preamble for using synchronization/channel estimation. The simulation result shows the same performance compared with single receiver antenna.

• ETRI Journal
• /
• v.29 no.4
• /
• pp.430-436
• /
• 2007

An OFDM/offset QAM (OQAM)-IOTA system uses the isotropic orthogonal transform algorithm (IOTA) function, which has good localization properties in the time and frequency domains. This is employed instead of the guard interval used in a conventional OFDM/QAM system in order to be robust for multi-path channels. However, the conventional channel estimation scheme is not valid for an OFDM/OQAM-IOTA system due to the intrinsic inter-symbol interference of the IOTA function. In this paper, a condition is derived to reduce the intrinsic interference of the IOTA function. This condition is obtained with the proposed pilot structure used for perfect channel estimation. We also derive the preamble structure appropriate for practical channel estimation of the OFDM/OQAM-IOTA system. Simulation results show that the OFDM/OQAM-IOTA system with the proposed preamble structure performs better than the conventional OFDM system, and it has the additional advantage of an increased data transmission rate which corresponds to the guard interval retrieval.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.2
• /
• pp.231-238
• /
• 2006

The performance of free-breathing polymer electrolyte membrane fuel cell (PEMFC) was studied experimentally and the effect of cathode separator structure on the cell performance was investigated. Cathode separators were used for the cell with $18cm^2$ active area. In channel type, the contact resistance is low, and the nature convection. which is strongly affected by the cross-sectional shape of cathode separator channel, is dominant in a cell performance. The maximum power density with $18cm^2$ active area is $105mW/cm^2$ using the 10mm depth and 2mm width channel. A computational analysis was optimum structure of free-breathing channel type PEMFC for robotic application.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.91-93
• /
• 2008

The organic field-effect transistors with step-edge structure were fabricated. Source and drain electrodes were obliquely deposited by vacuum evaporation. The step-edge of the gate electrode serve as a shadow mask, and the short channel is formed at the step-edge. The excellent device performances were obtained.

• Journal of the Korean Society of Food Culture
• /
• v.13 no.1
• /
• pp.37-46
• /
• 1998

Distribution structure is the link between a society's needs and its industrial responses. A change in distribution structure brings about a consumption structure which may results in considerable changes in lifestyle including food habits. The purpose of this study was to evaluate a effect of change of distribution structure on the food purchase. The survey was carried from May to June, 1997 by way of questionnaire of 407 housewives, aged 23-64 years, in Seoul and the capital area. The questionaire consists of sociodemographic characteristics of the subjects and distribution channel, information route of food selection, acknowledgement and coefficient of utilization of new distribution channel, mainly used distribution channel in food purchase, important factors in food selection, and food purchasing behavior. Their data were statistically analyzed based on frequency, mean, and $X^2-test$. The major findings of this study were as follows; 1) Most frequently used distribution channels in food purchase were supermarket(38.53%), department store(15.23%), discount store(14.05%), a conventional retail market(13.87%), membership wholesale club(8.07%), and a conventional wholesale market(6.53%). 2) The new distribution channels that subjects have ever used were discount store(75.4% of the subject), membership wholesale club(63%), mail order house(32%), outlet store(29.4%), home shopping(10.3%). 3) Compared to the subject living far from the new distribution channel, the subject living close to the new distribution channel was higher in frequency of new distribution channel utilization. These observations suggest that change of the distribution structure promotes the change of the food purchasing behavior.

• Journal of Distribution Science
• /
• v.18 no.1
• /
• pp.5-13
• /
• 2020

Purpose: The purpose of this study is to examine the growth and change process of Korean cosmetic market that has grown more than three times since 2000. It also examined how the growth and decline of the cosmetics brands are related to the change of the cosmetic distribution structure. Research methodology: This study tried to classify the change of the Korean cosmetics market into four stages based on the market sales information. It analyzed the sales information of Korean cosmetic companies and the relationship with the sales of the brands by distribution channel. Results: One-brand store channel had played a leading role in the market growth, and multi-brand stores have grown and a number of brands also grew through that channel since 2013. Since 2016, multi-brand stores have continued to grow and have dominated the market beyond one-brand store channel. Conclusions: The changes in sales of domestic cosmetics companies have been classified based on the distribution channel type in four stages: the emergence of one-brand store, the growth of one-brand store channel, the growth of multi-brand store channel, and the decline of one-brand store channel. In conclusion, multi-brand store channels have recently grown in the Korean cosmetics market, and this trend is expected to continue.