• 전기전자학회논문지
• /
• 제25권4호
• /
• pp.778-781
• /
• 2021

본 논문에서는 SPICE를 사용한 16단 3D NAND Flash memory compact modeling을 제안한다. 동일한 structure와 simulation 조건에서 Down Coupling Phenomenon(DCP)과 Natural Local Self Boosting(NLSB)에 대한 channel potential을 Technology Computer Aided Design(TCAD) tool Atlas(Silvaco^TM)와 SPICE로 simulation하고 분석했다. 그 결과 두 현상에 대한 TCAD와 SPICE의 channel potential이 매우 유사한 것을 확인할 수 있었다. SPICE는 netlist를 통해 소자 structure를 직관적으로 확인할 수 있다. 또한, simulation 시간이 TCAD에 비해 짧게 소요된다. 그러므로 SPICE를 이용하여 3D NAND Flash memory의 효율적인 연구를 기대할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1924-1926
• /
• 2001

A novel wet release process ($\mu$ CARP - Micro Channel Assisted Release Process) for releasing an extreme large-area plate structure without etching hole is proposed and experimented. Etching holes in conventional process reduce a effective area and degrade an optical characteristics by a diffraction. In addition, as the area of a released structure increases, the stietion becomes more serious. The proposed process resolves these problems by the introduction of a micro fluidic channel beneath the structure which will be released. In this paper, a 5 mm${\times}$5mm-single crystal silicon plate structure was released by the proposed $\mu$CARP without etch holes on the structure. The variation in etching time with respect to the of the introduced micro channel is also examined. This process is expected to be beneficial for the actuator of a nano-scale data storage and the scanning mirror.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.135-140
• /
• 2001

This study was developed high-quality a large size precast channel structure using polymer concrete to improve quality of the product as well as to enhance construction quality. Precast PC represent the fastest growing segment of the polymer concrete industry. The fast curing, high strength, and low impermeability permit thin section and rapid reuse of moulds. Developed precast channel structure will be structural experiment and analysis. Also, through an example to construct will be develop the most suitable section survey and make practicable.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.157-160
• /
• 2002

This study was developed high-quality a large size precast channel structure using polymer concrete to improve quality of the product as well as to enhance construction quality. Practical precast channel structure design and manufacture procedure for the high polymer concrete were described in this paper. Precast PC represent the fastest growing segment of the polymer concrete industry. The fast curing, high strength, and low impermeability permit thin section and rapid reuse of moulds. Precast channel structure will carry out structural experiment and analysis.

• 대한임베디드공학회논문지
• /
• 제2권1호
• /
• pp.66-75
• /
• 2007

In this paper, we have propose a preamble structure and synchronization/channel estimation method for UWB-MIMO which has 960Mbps transmit rate. The proposed structure is a compatible preamble structure for synchronization/channel estimation used by MIMO in MB-OFDM(Multi-Band OFDM) systems that are one of the standard systems of MBOA. The system is compatible with MB-OFDM using the proposed preamble structure. In this paper, we argue the problem in receiver part used by MIMO technique. And we simulate the proposed preamble for using synchronization/channel estimation. The simulation result shows the same performance compared with single receiver antenna.

• ETRI Journal
• /
• 제29권4호
• /
• pp.430-436
• /
• 2007

An OFDM/offset QAM (OQAM)-IOTA system uses the isotropic orthogonal transform algorithm (IOTA) function, which has good localization properties in the time and frequency domains. This is employed instead of the guard interval used in a conventional OFDM/QAM system in order to be robust for multi-path channels. However, the conventional channel estimation scheme is not valid for an OFDM/OQAM-IOTA system due to the intrinsic inter-symbol interference of the IOTA function. In this paper, a condition is derived to reduce the intrinsic interference of the IOTA function. This condition is obtained with the proposed pilot structure used for perfect channel estimation. We also derive the preamble structure appropriate for practical channel estimation of the OFDM/OQAM-IOTA system. Simulation results show that the OFDM/OQAM-IOTA system with the proposed preamble structure performs better than the conventional OFDM system, and it has the additional advantage of an increased data transmission rate which corresponds to the guard interval retrieval.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권2호
• /
• pp.231-238
• /
• 2006

The performance of free-breathing polymer electrolyte membrane fuel cell (PEMFC) was studied experimentally and the effect of cathode separator structure on the cell performance was investigated. Cathode separators were used for the cell with $18cm^2$ active area. In channel type, the contact resistance is low, and the nature convection. which is strongly affected by the cross-sectional shape of cathode separator channel, is dominant in a cell performance. The maximum power density with $18cm^2$ active area is $105mW/cm^2$ using the 10mm depth and 2mm width channel. A computational analysis was optimum structure of free-breathing channel type PEMFC for robotic application.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.91-93
• /
• 2008

The organic field-effect transistors with step-edge structure were fabricated. Source and drain electrodes were obliquely deposited by vacuum evaporation. The step-edge of the gate electrode serve as a shadow mask, and the short channel is formed at the step-edge. The excellent device performances were obtained.

• 한국식생활문화학회지
• /
• 제13권1호
• /
• pp.37-46
• /
• 1998

Distribution structure is the link between a society's needs and its industrial responses. A change in distribution structure brings about a consumption structure which may results in considerable changes in lifestyle including food habits. The purpose of this study was to evaluate a effect of change of distribution structure on the food purchase. The survey was carried from May to June, 1997 by way of questionnaire of 407 housewives, aged 23-64 years, in Seoul and the capital area. The questionaire consists of sociodemographic characteristics of the subjects and distribution channel, information route of food selection, acknowledgement and coefficient of utilization of new distribution channel, mainly used distribution channel in food purchase, important factors in food selection, and food purchasing behavior. Their data were statistically analyzed based on frequency, mean, and $X^2-test$. The major findings of this study were as follows; 1) Most frequently used distribution channels in food purchase were supermarket(38.53%), department store(15.23%), discount store(14.05%), a conventional retail market(13.87%), membership wholesale club(8.07%), and a conventional wholesale market(6.53%). 2) The new distribution channels that subjects have ever used were discount store(75.4% of the subject), membership wholesale club(63%), mail order house(32%), outlet store(29.4%), home shopping(10.3%). 3) Compared to the subject living far from the new distribution channel, the subject living close to the new distribution channel was higher in frequency of new distribution channel utilization. These observations suggest that change of the distribution structure promotes the change of the food purchasing behavior.

• 유통과학연구
• /
• 제18권1호
• /
• pp.5-13
• /
• 2020

Purpose: The purpose of this study is to examine the growth and change process of Korean cosmetic market that has grown more than three times since 2000. It also examined how the growth and decline of the cosmetics brands are related to the change of the cosmetic distribution structure. Research methodology: This study tried to classify the change of the Korean cosmetics market into four stages based on the market sales information. It analyzed the sales information of Korean cosmetic companies and the relationship with the sales of the brands by distribution channel. Results: One-brand store channel had played a leading role in the market growth, and multi-brand stores have grown and a number of brands also grew through that channel since 2013. Since 2016, multi-brand stores have continued to grow and have dominated the market beyond one-brand store channel. Conclusions: The changes in sales of domestic cosmetics companies have been classified based on the distribution channel type in four stages: the emergence of one-brand store, the growth of one-brand store channel, the growth of multi-brand store channel, and the decline of one-brand store channel. In conclusion, multi-brand store channels have recently grown in the Korean cosmetics market, and this trend is expected to continue.