• The KIPS Transactions:PartB
• /
• v.11B no.6
• /
• pp.625-632
• /
• 2004

Since the H.264 encoding adopts both forward prediction and hi-direction prediction modes and exploits Variable Length Coding(VLC), the amount of data generated from video encoder varies as Flaying time goes by. The fixed bit rate encoding system which has limited transmission channel capacity uses a buffer to control output bitstream It's necessary to control the bitstream to maintain within manageable range so as to protect buffer from overflow or underflow. With existing bit amount control algorithms, the $\lambda_{MODE}$ which is relationship between distortion value and quantization parameter often excesses normal value to end up with video error. This paper proposes an algorithm to protect buffer from overflow or underflow by introducing a new quantization parameter against distortion value of H.264 video data. The test results of 6 exemplary data show that the proposed algorithm has the same PSNR as and up to 8% reduced bit rate against existing algorithms.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.18 no.3
• /
• pp.4184-4194
• /
• 1976

Located in the southwestern part of Korea, the Yong San Gang river flows generally northeast to southwest, and because of the specific location, topography and climate, the basin area is subject to recurrent drought and flood damages. To eliminate the cause of such damages and ensure an increase in the farm income by means of effective irrigation supply and increased cropping intensity, efforts are being made to speed up implementation of an integrated agricultural development project which would include construction. of an estuary dam and irrigation facilities as well as land development and tidal reclarnation. In formulating a basin development project plan, it is necessary to study a series of long-term runoff data. The catchment area at the proposed estuary damsite is 3,471$\textrm{km}^2$ with the total length of the river channel up to this point reaching 138km. An analysis of runoff in this area was carried out. Rainfall was estimated by the Thiessen Network based on records available from 15 of the rainfall observation stations within the area. Out of the 15 stations, Kwang Ju and Mok Po stations were keeping long-term precipitation records exceeding some 60 years while the others were in possession of only 5-10 years records. The long-term records kept by those stations located in the center of the basin were used as base records and records kept by the remaining stations were supplemented using the coefficient of correlation between the records kept by the base stations and the remainder. The analyses indicate that the average annual rainfall measured at Kwang Ju during 1940-1972 (33 years) amounts to 1,262mm and the areal rainfall amounts to 1,236mm. For the purpose of runoff analysis, 7 observatories, were set up in the middle and lower reaches of the river and periodic measurements made by these stations permitted analysis of water levels and river flows. In particular, the long-term data available from Na Ju station significantly contributed to the analysis. The analysis, made by 4-stage Tank method, shows that the average annual runoff during 1940-1972 amounts to 2,189 million ㎥ at the runoff rate of 51%. As for the amount of monthly runoff, the maximum is 484.2 million ㎥ in July while the minimum is 48.3 million ㎥ in January.

• Journal of Plant Biotechnology
• /
• v.7 no.2
• /
• pp.87-95
• /
• 2005

The tomato ripening associated membrane protein (TRAMP) (Fray et al., 1994) is a member of the major intrinsic protein (MIP) family, defined as channels facilitating the passage of water and small solutes through membranes. During normal fruit ripening the TRAMP mRNA levels were increased whereas the expression levels of TRAMP in low ethylene ACO1-sense suppressed lines, Nr and rin fruits, were lower than at the breaker stage of wild type fruit. TRAMP mRNA is inhibited by $LaCl_3$, which is an inhibitor of $Ca^{2+}$-stimulated responses, treatment but drought condition did not affect TRAMP expression. The levels of TRAMP mRNA transcripts were substantially higher in the dark treated seedlings and fruits. These suggest that TRAMP function as a water channel may be doubted because of several reasons; no water content was changed during ripening in wild type, antisense and overexpression lines, TRAMP expression under light condition was lower than dark condition and TRAMP expression was not changed in drought condition. Co-suppression plant, 3588 was one of sense suppression lines, which contain CaMV 35S promoter and sense pNY507 cDNA, produced small antisense RNA, approximately 21-25 nucleotides in length, mediated post-transcriptional gene silencing. Therefore, TRAMP expression was inhibited by small antisense and multiple copies might induce gene silencing without any production of double strand RNA. Total seven selected volatile productions, isobutylthiazole, 6-methyl-5-hepten-2-one, hexanal, hexenal methylbutanal, hexenol, and methylbutanol, were highly reduced in sense line whereas total volatile production was increased in TRAMP antisense line. These results suggested TRAMP might change volatile related compounds.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.116.1-116.1
• /
• 2011

Materials with a combination of high electrical conductivity and optical transparency are important components of many electronic and optoelectronic devices such as liquid crystal displays, solar cells, and light emitting diodes. In this study, to fabricate a low-resistance and high optical transparent electrode film for organic photovoltaic, the following steps were performed: the design and manufacture of an electroforming stamp mold, the fabrication of thermal roll imprinted (TRI) poly-carbonate (PC) patterned films, the manufacture of high-conductivity and low-resistance Ag paste which was filled into patterned PC film using a doctor blade process and then coated with a thin film layer of conductive polymer by a spin coating process. As a result of these imprinting processes the PC films obtained a line width of $10{\pm}0.5{\mu}m$, a channel length of $500{\pm}2{\mu}m$, and a pattern depth of $7.34{\pm}0.5{\mu}m$. After the Ag paste was used to fill part of the patterned film with conductive polymer coating, the following parameters were obtained: a sheet resistance of $9.65{\Omega}$/sq, optical transparency values were 83.69 % at a wavelength of 550 nm.

• Journal of the Korean Vacuum Society
• /
• v.20 no.1
• /
• pp.63-69
• /
• 2011

In this study, we report on the novel lithographic patterning method to fabricate organic thin film field effect transistors (OTFTs) based on photo and e-beam lithography with well-known silicon technology. The method is applied to fabricate pentacene-based organic field effect transistors. Owing to their solubility, sub-micron sized patterning of P3HT and PEDOT has been well established via micromolding in capillaries and inkjet printing techniques. Since the thermally deposited pentacene cannot be dissolved in solvents, other approach was done to fabricate pentacene FETs with a very short channel length (~30 nm), or in-plane orientation of pentacene molecules by using nanometer-scale periodic groove patterns as an alignment layer for high-performance pentacene devices. Here, we introduce $Al_2O_3$ film grown via atomic layer deposition method onto pentacene as a passivation layer. $Al_2O_3$ passivation layer on OTFTs has some advantages in preventing the penetration of water and oxygen and obtaining the long-term stability of electrical properties. AZ5214 and ma N-2402 were used as a photo and e-beam resist, respectively. A few micrometer sized lithography patterns were transferred by wet and dry etching processes. Finally, we fabricated micron sized pentacene FETs and measured their electrical characteristics.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.379-379
• /
• 2013

본 논문에서는 Normal ink jetting 공법으로 OTFT를 제작할 때 coffee stain effect에 의해서 반도체 소자의 특성이 저하되는 것을 극복하기 위해서 동일한 위치에 동일한 부피로 Droplet을 형성하는 Multiple ink jetting 공법을 통해 TIPS pentacene 결정의 Morphology와 전기적 특성이 어떻게 변화하는지 알아 보았다. Multiple ink jetting의 drop 횟수가 증가할수록 coffee stain effect에 의해서 형성된 가운데 영역의 Dendrite grain이 점점 작아지다가 7 Drops 이후로는 Big grain 만 남게 되었다. Active layer의 표면 Roughness는 drop 횟수가 증가할수록 낮아지다가 일정 count 이후로는 다시 높아지는 것을 확인할 수 있었다. 전계 이동도(mobility)는 drop 횟수가 증가할수록 커지다가 일정 count 이후로는 saturation되는 것을 확인할 수 있었다. Multiple ink jetting에 의해서 만들어진 OTFT 소자의 전계 이동도(mobility)는 1 drop과 10 drops에서 각각 0.0059, 0.036 cm2/Vs 로 6배 정도 차이가 있었다. 이것은 첫 drop에 의해 만들어진 가운데 Dendrite grain 영역이 Multiple ink jetting을 반복하면서 점점 작아지게 되어 사라지고 두꺼운 Grain 영역만 남게 된 것으로 판단된다. Vth 와 On/Off ratio는 1 drop과 10 drops에서 각각 -3 V, -2 V 그리고 $3.3{\times}10^3$, $1.0{\times}10^4$를 보였다. OTFT의 substrate로 Flexible한 polyethersulfone (PES) 기판을 사용하였고, 절연체로 Spin coating된 Poly-4-vinylphenol (PVP)가 사용되었으며, Gate 및 Source/Drain 전극은 Au를 50 nm 두께로 증착하였다. Channel의 width와 length는 각각 100 um, 40 um 였고, Gate 전극 위에 Active layer를 형성한 Bottom gate 구조로 제작되었다. Ink jet으로 제작된 TIPS pentacene의 결정성은 x-ray diffraction (XRD)와 광학 현미경으로 분석하였고 Thickness profile은 알파스텝 측정기를 이용하였으며, OTFT의 전기적 특성은 Keithley-4,200을 사용하여 측정하였다.

• KIISE Transactions on Computing Practices
• /
• v.20 no.12
• /
• pp.688-693
• /
• 2014

With the advent of ubiquitous environments, the smart phone has come into wide use and the demand for various content increases. Thus, in order to efficiently utilize limited resources cognitive radio technology is regarded as a possible solution. Besides spectrum sensing or access schemes, the provision of VoIP traffic service for secondary users with limited spectrum resources is a very important issue. In this paper, a resource allocation and control system for VoIP QoS provision in cognitive radio networks is proposed. Firstly, as the system model, the time structure of the network is addressed and, according to the structure, a bandwidth broker is proposed. In addition, based on available bandwidth estimated by the bandwidth broker, a connection admission control for secondary users is developed. It is demonstrated that the provision of VoIP QoS is greatly affected by channel utilization, the number of channels, and the length of timeslot.

• Steel and Composite Structures
• /
• v.27 no.5
• /
• pp.537-543
• /
• 2018

Mechanical shear connectors are commonly used to transfer longitudinal shear forces across the steel-concrete interface in composite beams. Steel pipe as a new shear connector is proposed in this research and its performance to achieve composite strength is investigated. Experimental monotonic push-out tests were carried out for this connector. Then, a nonlinear finite element model of the push-out specimens is developed and verified against test results. Further, the finite element model is used to investigate the effects of pipe thickness, length and diameter on the shear strength of the connectors. The ultimate strengths of these connectors are reported and their respective failure modes are discussed. This paper comprises of the push-out tests of ten specimens on this shear connector in both the vertical and horizontal positions in different reinforced concretes. The results of experimental tests are given as load-deformation plots. It is concluded that the use of these connectors is very effective and economical in the medium shear demand range of 150-350 KN. The dominant failure modes observed were either failure of concrete block (crushing and splitting) or shear failure of pipe connector. It is shown that the horizontal pipe is not as effective as vertical pipe shear connector and is not recommended for practical use. It is shown that pipe connectors are more effective in transferring shear forces than channel and stud connectors. Moreover, based on the parametric study, a formula is presented to predict the pipe shear connectors' capacity.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.5
• /
• pp.671-681
• /
• 2014

The distribution and abundance of coastal fish species in Asan Bay, Korea, were estimated from hydroacoustic survey and net catches. Acoustic data were collected with 38 and 200 kHz from July to October of 2012, and converted to the nautical area scattering coefficient (NASC, $m^2/mile^2$) for $0.25n{\cdot}mile$ along ten transects. Japanese anchovy Engraulis japonicus was the dominant specie in the net catches. The virtual echogram technique was used to distinguish E. japonicus from other species based on the differences in the mean volume backscattering strength (${\Delta}MVBS$) at 38 and 200 kHz. Engraulis japonicus and other fishes are mainly distributed in the center channel and outer part of Asan Bay. E. japonicus tends to move from inner to outer Asan Bay in summer and fall. From NASC data, the target strength and length-weight function of E. japonicus and other fishes were used to estimate the E. japonicus stock at 24.1-93.3 tons, and other fish at 40.6-88.4 tons from July to October 2012. The estimated anchovy biomass compared well with the cumulative catch weight from stow net catches. The hydroacoustic method offers an approach to understanding spatial/temporal structure and estimating the biomass of fish aggregations in coastal areas.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.1
• /
• pp.41-51
• /
• 2001

In this paper, we presented that the performance of the TCM(Trellis Coded Modulation) using the Euclidean distance is better than that of the convolutional code using the hamming distance under the same bandwidth efficiency. And the TCM DECODER for next generation mobile communication replacing the using convolutional decoder is implemented. Also, for the implementation of the TCM DECODER, the convolutional decoder and the TCM decoder were made by C-language and simulated under AWGN channel with respect to the hard decision and the soft decision. So we proved that performance of the TCM is better than that of the convolutional code. From this result, TCM DECODER, of which constraint length is 3, 5 or 7 and which use the soft decision method, was implemented using the AHDL(Altera Hardware Description Language) and fortified using the Max+plus H version 8.2 of Altera corporation.