• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.179-185
• /
• 2019

In this paper, we have studied narrow-band analog pre-distortion linearization technique using UHF 400 MHz band 20 W power amplifier. The analog pre-distorter used the SC1894 radio frequency power amplifier linearizer(RFPAL) provided by MAXIM Corp and through the look-up table technique confirmed the intermodulation distortion(IMD) performance and the adjusted channel leakage ratio(ACLR) improvement for bandwidth below 1 MHz which does not operate on existing chips. In the 400 MHz (400 ~ 500 MHz) band, IMD performance and the ACLR improvement of up to 17.46 dB based on 1-channel offset and up to 16.6 dB based on 2-channel offset were confirmed. In the system requiring the same linearity, we confirmed power efficiency improvement of 12.41% at output power of over 40 W.

• ETRI Journal
• /
• v.29 no.3
• /
• pp.300-304
• /
• 2007

This paper proposes a new data-driven method for high-pass approaches, which suppresses slow-varying noise components. Conventional high-pass approaches are based on the idea of decorrelating the feature vector sequence, and are trying for adaptability to various conditions. The proposed method is based on temporal local decorrelation using the information-maximization theory for each utterance. This is performed on an utterance-by-utterance basis, which provides an adaptive channel normalization filter for each condition. The performance of the proposed method is evaluated by isolated-word recognition experiments with channel distortion. Experimental results show that the proposed method yields outstanding improvement for channel-distorted speech recognition.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.591-594
• /
• 2001

In the W-CDMA system, cell search is one of the imporant functions of the mobile station searching for a cell and achieving spreading code and time synchronization to its downlink scrembling code. For the methods of cell search to optimize codes, three stages are considered: 1) slot synchronization, 2) frame synchronization, and 3) scrambling code identification. Channels for cell search are Primary Synchronization Channel (P-SCH), Secondary Synchronization Channel(S-SCH), and Common Pilot Channel (CPICH). In this paper, cell search is analyzed based on simulation. Rake receiver provides improvement of Performance as an increase of bandwidth because there are more available multipaths. In this paper, the performance of W-CDMA system employing RAKE receiver is evaluated by computer simulation over the types of ITU_R wideband channel model and spreading rate. The result shows that the performance of CDMA adapting RAKE receiver is improved by the increase of multipath components in equal level of the received power.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2007.11a
• /
• pp.325-329
• /
• 2007

The mobile and multimedia service on wireless network have been leaded from the improvement of telecommunication techniques. A typical multimedia service, a video transmission usually requires larger bandwidth than voice transmission. Many channel allocation algorithms for Orthogonal Frequency Division Multiple Access (OFBMA) to use resources more efficiently, Previous channel allocation algorithms have developed with an assumption that the data traffic is constant bit rate (CBR). However, existing algorithms are not suitable to video traffic because it usually generates a variable bit rate (VBR) traffic. In this paper, we proposed a new channel allocation algorithm called a queue-based channel allocation. it is more suitable to transmit the video traffics. Also, a problem are notified in case of realtime generated video traffic and a corresponding heuristic solution was proposed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.1
• /
• pp.94-99
• /
• 2017

Breaking the rigid connection between the two faces of the wall can significantly improve the sound transmission loss of the wall. This is usually achieved by resiliently mounting the gypsum board on one of the two faces of the wall using resilient channel. Resilient channel with less stiffness than that of air cavity could move the resonance frequency of the light-weight wall. So we can get higher sound transmission loss at low frequencies for light-weight wall using resilient channel. It's sound transmission loss is 17 dB higher than that of single stud wall, and 5 dB higher than that of double stud wall.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.9
• /
• pp.819-827
• /
• 1991

In this study, the efficiency of spectrum utilization has compared in case of channel spacking 100 KHz and 200 KHz by application of technical specifications of domestic FM broadcasting varing with effective radiated power, terrain irregularity factor and effective height of thrnsmit antenna. The results show that if arranging by 100 KHz channel total number of available channel will increase twice and the efficiency of spectrum unilization will be better 1.36 to 2.0 times than that of 200 KHz channel spacing.

• Journal of electromagnetic engineering and science
• /
• v.1 no.2
• /
• pp.113-119
• /
• 2001

Conventional channel estimation methods for orthogonal frequency division multiplexing (OFDM) system don't show the good characteristics in terms of fast fading channels. To solve this drawback in conventional methods, we propose the channel estimation method fur OFDM, assisted pilot for improvement and convergence in mobile system (APIM), which has a good performance and computational complexity in consideration of other methods. APIM uses the more developed concept of conventional methods and a block frame structure within a whole channel. This concept prevents overall performance from diverging or showing a poor one. The simulation results demonstrate the APIM outperforms pilot symbol assisted modulation (PSAM) and extended symbol aided estimation (ESAE) in terms of mean square error (MSE) and bit error rate (BER) performance under all Rayleigh fading environment. Considering the simulation performance and computational complexity, we can see APIM shows better characteristics than conventional methods for OFDM and has not any error floor even in a fast Rayleigh fading environment.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.2 no.1
• /
• pp.11-33
• /
• 1996

This work aims at examining the navigational safety of the entrance channel of Inchon harbour and suggesting the way to improve ship's navigation of the navigational safety at Inchon, that small ships such as fishing boats and barges coming out of the harbour through the East Channel cause major threat to the inbound large ships using the channel. An additional new waterway, therefore, has been recommended to be established in the middle of the East and West Channels so that the outbound small ships can use it. A waterway design simulation methodology has been applied to examin the sagety of the newly suggested channel. Minor chansge has been made to the original design after the simulation experiment, and the corrected final design of the waterway has been suggested to be implemented as soon as possible.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.174-182
• /
• 2008

For the UHF EPC C1 Gen2 RFID system, to overcome the performance degradation in wireless channel environments, we proposed a modified tag structure which supports channel coding and its applied methodology. The reader consistently monitors the wireless channel status and sets to use channel coding functions for tags and reader only if wireless channel is corrupted. Compared with previous tag complexity, only negligible gates are needed to implement channel coding. By simulation we showed an obvious performance improvement of the identification reliability.

• 한국ITS학회:학술대회논문집
• /
• 2008.11a
• /
• pp.539-542
• /
• 2008