• Journal of Korea Multimedia Society
• /
• v.4 no.1
• /
• pp.75-81
• /
• 2001

A EBCOT(Embedded Block Coding with Optimized Truncation) is image compression codec using in JPEG2000, currently the new standard for still image coding. this paper proposes multi-channel video transfer system with EBCOT using a single codec to transfer video to difference band-width channel. This parer testify that compression rate of EBCOT higher than ordinary VLC using RLC and Huffman codec and apply EBCOT to JPEG structure. this structure increases parallelism and error resilience using black coding method. finally it looks into difficult to apply MPEG structure to multi channel video transfer system, and proposes solution using EBCOT.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1653-1662
• /
• 2012

Recently, Organic Light Emitting Diode (OLED) that is broadly applied as next generation display has various advantages. However, OLED display causes unbalanced color tone due to the difference of luminance efficiency among luminous elements. In this paper, we propose adaptive color shifter (ACS) to resolve the RGB channel unbalance and to have wide color range of a relatively weak channel using the image processing method. proposed ACS system was simulated using a variety of image. Also, we numerically analyzed using hue histogram, CIE-1931 xyz color space.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.10
• /
• pp.2563-2578
• /
• 1996

In this paper, channel error characteristics are investigated to alleviate the channel error propagation problem of the digital TV transmission systems. First, error propagation problems, which are mainly caused by the inter-frame dependancy and variable length coding of the MPEG-2 baseline encoder, are intensively analyzed. Next, existing channel resilient schemes are systematically classified into two kinds of schemes; one for the encoder and the other for the decoder. By comparing the performance and implementation cost, the encoder side schemes, such as error localization, layered coding, error resilience bit stream generation techniques, are described in this paper. Also, in an effort to consider the parcticality of the real transmission situation, an efficient error detection scheme for a decoder system is proposed by employing a priori information of the bit stream syntas, checking the encoding conditions at the encoder stage, and exploiting the statistics of the image itself. Finally, subsequent error concealment technique based on the DCT coefficient recovery algorithm is adopted to evaluate the performance of the proposed error resilience technique. The computer simulation results show that the quality of the received image is significantly improved when the bit error rate is as high as 10$^{-5}$ .

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.2 s.257
• /
• pp.159-166
• /
• 2007

Mixing between two or more reagents is one of important processes in biochemical microfluidics. In efficient micromixer design, it is essential to analyze flow pattern and evaluate mixing efficiency with good precision. In this work, mixing efficiency for Y-channel micromixer is measured by fluorescence intensity using LIF(Laser Induced Fluorescence) Confocal Microscope. The Y-channel micromixers are fabricated with polydimethylsiloxane(PDMS) and those are bonded to glass plate through Plasma bonding. Nile Blue A is injected into the micromixer as a fluorescence dye for measuring of fluorescence intensity by He/Ne laser. For visualization of the flow pattern, dynamic image capturing is carried out using CAM scope. For the comparison with computer simulation, modified SIMPLE algorithm for incompressible flow equation is solved for the same geometry as in the experiment. Throughout the experiments and computer simulation, accurate mixing efficiency evaluation process for a PDMS Y-channel micromixer is established.

• Journal of Korea Water Resources Association
• /
• v.42 no.5
• /
• pp.397-406
• /
• 2009

River is able to change by various environmental factors. In order to conduct restoration design of abandoned river channels, it is necessary to evaluate the river through the analysis of past and present river channels. River evaluation requires various data, such as geometry, hydraulic and hydrology, but there is a lot of difficulty to understand topographical information of river change on time and space due to a lack of past data by domestic conditions. This study analyzes the changes in past and present river channels and examines the applicability of river channel evaluation through image analysis using aerial photographs and 1918 year's map. Aerial photograph analysis was conducted by applying the image analysis method and GIS analysis method on Cheongmicheon. As a result of this analysis, we have quantitatively identified the form and size of abandoned channels, changes in the vertical-section and cross-section length of rivers, and micro-landform changes. More importantly, we verified that morphological changes in sandbars due to artificial straightening are important data in identifying the state of current river channels. In these results, although image analysis technique has limitations in two-dimensional information from aerial photographs, we were able to evaluate the changes in river channel morphology after artificial maintenance of the river.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.526-529
• /
• 2007

Due to its inherent feature of high-resolution satellite, there is strong need in some specific area to minimize the processing time required to get a standard image on hand from downlink signal acquisition. However, in general image processing system, it takes considerable time to get image data up to certain level from raw data acquisition because the huge amount of data is dealt sequentially as input data. This paper introduces the high-speed image processing system which generates the image data only for the area selected by user. To achieve the high speed performance, this system includes Quick Look Image display function with sampling, ROI selection function, Image Line Index function, and Distributed processing function. The developed RPS was applied to KOMPSAT-2 320Mbps downlink channel and its effectiveness was successfully demonstrated. This feature to provide the image product very quickly is expected to promote the application of high resolution satellite image.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.1
• /
• pp.66-75
• /
• 2000

In this paper, we present the efficient image transmission system using designed source-channel combined coder in W-CDMA mobile communication system. In proposed schemes, we decompose the wavelet transformed hierarchical band-images into some types of different size blocks which have different properties in error sensitivity. The RS(Reed-Solomon) coder with different coding rate is used for each decomposed source blocks which has different importance. In addition, we combine retransmitted error frames in Truncated Hybrid Type I ARQ. The proposed algorithm shows efficient image transmission methods because it is not much degraded in PSNR compared with the existing not combined source-channel coder in erroneous wireless channel.

• Journal of Digital Convergence
• /
• v.14 no.7
• /
• pp.331-337
• /
• 2016

The purpose of this study is to provide a method to visualize the sound data to the three-dimensional image. The visualization of the sound data is performed according to the algorithm set after production of the text-based script that form the channel range of the sound data. The algorithm consists of a total of five levels, including setting sound channel range, setting picture frame for sound visualization, setting 3D image unit's property, extracting channel range of sound data and sound visualization, 3D visualization is performed with at least an operation signal input by the input device such as a mouse. With the sound files with the amount an animator can not finish in the normal way, 3D visualization method proposed in this study was highlighted that the low-cost, highly efficient way to produce creative artistic image by comparing the working time the animator with a study presented method and time for work. Future research will be the real-time visualization method of the sound data in a way that is going through a rendering process in the game engine.

• Journal of IKEEE
• /
• v.14 no.1
• /
• pp.1-7
• /
• 2010

This paper presents an implementation of the DisplayPort AUX(Auxiliary) Channel. DisplayPort uses Main link, AUX Channel and Hot Plug Detect line to transfer the video & audio data. For isochronous transport service, source device converts to image and audio data which are to be transported through the Main Link and transports the restructured image and audio data to sink device. The AUX Channel provides link service and device service for discovering, initializing and maintaining the Main link. Hot Plug Detect line is used to confirm the connection between source device and sink device. The AUX Channel is implemented with 3315 LUTs(Look Up Table), 1466 Flip Flops and 168.782MHz max speed synthesized using Xilinx ISE 9.2i at SoC Master3.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.93-96
• /
• 2001

In this paper, the performance of DS/CDMA-BPSK system for image transmission is simulated by computer, and received image is compared with the origin image. In order to transmit standard image 'Lena', the image is discrete-cosine- transformed and quantized. Then image transmission data is made through assigning 8 bits to the image and high frequency data part of the image is compressed for reducing the size of data. The source-coded image is transmitted and received by the DS/CDMA-BPSK system. The BER, PSNR, and source Quality are changed according to the number of multiple access users, processing gain of the system, and SMR.