• Journal of the Korean Graphic Arts Communication Society
• /
• v.27 no.1
• /
• pp.29-47
• /
• 2009

Generally, if RGB image is sent to the printer when we print a digital photograph, the printer will convert RGB to CMYK by the inner built-in drive. Because the difference between color domain of RGB and CMYK will cause that change and difference. The most common way to solve the problem is to convert colors by using ICC profile at RIP software or to adapt automatic color converting from the software of the original printer. So we intended to study show which way is most efficient to the digital output and which color mode device is the best based on the printer's own drive in this paper. we tried to observe and check the extended range of color space such as AdobeRGB as well as CMYK and sRGB. Then we made sure which is the suitable color space. Besides, When we convert RGB mode into CMYK mode by utilizing RIP software and adapt the printer's ICC profile made by our selves, we evaluated the output we get and compared the result with extended RGB image. The results are as follows. In case of RGB mode, the printer requests RGB, and that makes the color space more efficient than CMYK's. Converted to CMYK by utilizing RIP software, the chroma is more linearized than the one produced with its' own driver. Compared with sRGB mode's color gamut, AdobeRGB mode's color gamut and CMYK mode's color, CMYK mode's color gamut is the smallest among 3 of them. CMYK mode's color gamut by utilizing RIP software can be changeable. that can be small and narrow or wide and broad. In other words, the volume of color gamut depends on how CMYK is linearized. The color space of sRGB is more advantageous than the one of AdobeRGB in color-reproduction printed. But in the group $-b^*$, the chroma leaves behind in terms of reproduction, In the group of $-a^*$, the chroma is excellent relatively. Visual evaluation of the image, AdobeRGB image has not many reproduction colors. Specially, according to printers' characteristics, Group B of AdobeRGB and sRGB color space is a long way behind In terms of reproduction but Group Y is excellent relatively.

• Korean Institute of Interior Design Journal
• /
• v.22 no.3
• /
• pp.195-204
• /
• 2013

Today, the children's museum evolved from place of exhibition for seeing and feeling, to that of exhibition for searching and touching, or so-called the hands-on exhibition. This will allow for grabbing the interest from children and provide an opportunity for learning by an actual experience at this intellectual and benign environment. But in this modern society that constantly undergoes evolution even as we speak, it is not an easy task to bring our children to museums, because they are vastly exposed to various media. Moreover, if the children who visited museums carelessly bypass the specific areas intended for exhibition, the educational purpose of "enhanced learning effect with hands-on experience" is easily underachieved. According to children's visual stimuli, their behavioral charactoristics are appeared to freewill curiosity but they show shorter elapsed time(impermanence), intensity(stubbornness), frequent occurrence(frequentness) and changeable (translatability). So, We need Improvement of visual image affordance through the measurement of stay time. Firstly, five factors are extracted by factor analysis on twenty questions based on visual image factors; Color accessability and Satistaction(factor1), brightness and color harmony(factor2), feeling on harmonization of color and stay time(factor3), simplex & complex of space(factor4), feeling on scale(factor5) Secondly, the following result are derived through a distribution chart on an exhibition room of K-museum. As shown above, this study based on various analyzed aspects proposes the directions of a color image plan to improve stay time in exhibition space of children museums with a hope to support educational goals of experience education-focused children museums.

• Journal of the Korea Furniture Society
• /
• v.26 no.4
• /
• pp.392-397
• /
• 2015

This study was carried out to analyze the effects on mechanical properties of deteriorated wood member by outdoor condition. The surface color, mechanical properties and structural stability of traditional wooden structures, exposed in water and UV, could be changeable. For the purpose, accelerated weathering test based on outdoor condition was carried out. The weathering time levels were composed 0, 500, 1000, 1,500 and 2,000 hours and mechanical properties were evaluated on each specimen according to weathering time level. Bending properties were decreased on weathering but recovered after 1,000 hours. Fatigue and impact strength were decreased to 1,000 hours and did not changed since then. Abrasion resistance was minimized in 1,000 hours. This results could be utilized for effectively stability management of traditional wooden structures and members.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.3
• /
• pp.339-343
• /
• 2011

Purpose: In this study, we investigated changes of phoria based on varying the color and concentration of the color in lenses. Methods: We measured distance phoria for 39 students who aged 20 to 40 with different concentrated lenes - red, gray, brown and green lenses in concentration 20%, 50% and 80%, respectively. Results: Subjects were divided into three groups which were orthophoria, esophoria and exophoria. Orthophoria in all the color and concentration, there were a few of the esophoria. Esophoria of average 2.07${\Delta}$,B.O showed that a slight increase in all colors and concentration, especially in brown lenses showed the greatest increase. Exophoria of average 3.82${\Delta}$,B.I showed that a slight decrease in all colors and concentration, especially in green lenses showed to 2.95${\Delta}$,B.I to the greatest decrease. Different concentration in same color had no specific tendency regarding phoria. Conclusions: The phoria must be considered when selecting color of the lens because of phoria is changeable by color of the lens. It is expected to study the criteria that minimize the asthenopia.

• Korean Journal of Optics and Photonics
• /
• v.32 no.5
• /
• pp.220-229
• /
• 2021

The optical characteristics of high-power direct-lit white light-emitting diode (LED) lighting were investigated, where a quantum dot (QD) film was adopted to enhance the color-rendering index (CRI). The transmittance of the diffuser plate and the concentration of the QD film were varied in this study. The color coordinates and the correlated color temperature (CCT) did not show any appreciable change, while the CRI values increased slightly as the transmittance of the diffuser plate decreased. The investigated optical properties were nearly independent of the viewing angle, and the luminance distribution was close to Lambertian. The CCT decreased from approximately 6000 K to approximately 4000 K as the concentration of the QD film increased from 0 to 7.5 wt%, which was due to the enhanced red component in the emission spectrum. The CRI increased to approximately 95 for some optical configurations of the lighting. These results demonstrate that glare-free, color-changeable, high-rendering LED lighting can be realized by using a combination of a diffuser plate of appropriate transmittance and a red QD film.

• Journal of Korea Multimedia Society
• /
• v.15 no.11
• /
• pp.1319-1329
• /
• 2012

AGVs are more and more utilized nowadays and magnetic guided AGVs are most widely used because their system has low cost and high speed. But this type of AGVs requires high infrastructure building cost and has poor flexibility of navigation path layout changing. Thus it is hard to applying this type of AGVs to a small quantity batch production system or a cooperative production system with many AGVs. In this paper, we propose a vision based guideline interpretation technique that uses the cheap, easily installable and changeable color tapes (or paint) as a guideline. So a vision-based AGV with color tapes is effectively applicable to the production systems. For easy setting and changing of AGV navigation path, we suggest an automatic method for interpreting a complex guideline layout including multi-branches and joins of branches. We also suggest a trace direction decision method for stable navigation of AGVs. Through several real-time navigation tests with an industrial AGV installed with the suggested technique, we confirmed that the technique is practically and stably applicable to real industrial field.

• Science of Emotion and Sensibility
• /
• v.13 no.2
• /
• pp.309-316
• /
• 2010

This paper proposes healthcare bathing system for improving the multisensory function and not washing. We designed various types of bathtub for developing bathing system. This system consists of whirlpool bathtub for multisensory stimulation, a cover of bathtub with visual-auditory stimulation function, a small size PC for main control, touch panel, digital multimedia broadcasting (DMB), color-changeable LED mood lighting system for improving visual sensibility and speaker. We investigate the effects on autonomic nervous system during bathing with healthcare bathing system for improving the multisensory functions. To analysis physiological parameter, body temperature, blood pressure, intraocular pressure and heart rate variability (HRV) were measured before, during and after bath using healthcare bathing system. Experiments were performed on partial immersion bath and the water temperature was kept $39{\pm}0.5^{\circ}C$. The body temperature and the heart rate variability of the subject were measured every 5 minutes before, during, and after the bath. In analysis of HRV, the parasympathetic nerve increased from starting bath and decreased after 15 minutes. So the subjects felt comfortable at 15 minutes after starting bath. Blood pressure decreased to 16mmHg maximumly however pulse increased. Bath using healthcare bathing system for improving the multisensory functions affects positively the circulation of the blood. From this results, it leaves something to be desired in evaluation of serviceability and physiological analysis using the healthcare bathing system, however, we expect to analyze more clearly the relationship between the serviceability of product, physiological change and sensibility by various physiological parameters.

• Korean journal of food and cookery science
• /
• v.21 no.6 s.90
• /
• pp.888-894
• /
• 2005

We investigated the development of a new seasoning sauce using port, medicinal herbs and bee's propolis on the basis scientific experiment. We divided the sample manufacturing conditions of medicinal herbs into the following four formulae A (control), B (boiling water extraction, with added propolis), C (boiling water extraction, without propolis) and D (pressure extraction, without propolis). There was little difference in pH, titrable acidity, sodium chloride and sugar composition among the four formulae. The color value, was not changeable, despite being maintained in temperature storage (at $4^{\circ}C\;{\pm}2$) for 60 days. The order was formulae B, C, A and D. In particular, formulae B with added medicinal herbs and propolis showed greater change in oxidation than the other formulae, but lesser change in pH. A comparison of commercial and sample products, indicated only a small change in physicochemical characteristics. However, the sample products showed much superior sensory characteristics, than commercial products.