• Solar Energy
• /
• v.8 no.1
• /
• pp.49-56
• /
• 1988

Thermally treated Korean ilmenite was characterized and used for water splitting to obtain hydrogen by photo-catalytic reaction. Experiments on specific surface area, X-ray diffraction and EDS showed that the formation of FeO, $Fe_2O_3$ and $TiO_2$ ilmenite crystal surface increased the specific surface area with maximum value, phase change of $TiO_2$ at $600^{\circ}C$ and hetrogeneity. The hydrogen evolved in caustic soda solution on these ilmenites indicated that there was a maximum yield point at about $600^{\circ}C$. This point was explained with the change of the surface area due to sintering of newly formed FeO, $Fe_2O_3$ and $TiO_2$, as well as crystal phase change of anatase to rutile at $600^{\circ}C$. Produced hydrogen increased also as the concentration of caustic soda, but become constant at the near 1N solution.

• Communications for Statistical Applications and Methods
• /
• v.6 no.3
• /
• pp.801-812
• /
• 1999

Change-point hazard rate models arise for example in applying "burn-in" techniques to screen defective items and in studing times until undesirable side effects occur in clinical trials. Sometimes in screening defectives it might be sensible to model two stages of burn-in. In a clinical trial there might be an initial hazard rate for a side effect which after a period of time changes to an intermediate hazard rate before settling into a long term hazard rate. In this paper we consider the multiple change points hazard rate model. The classical approach's asymptotics can be poor for the small to all moderate sample sizes often encountered in practice. We propose a Bayesian approach avoiding asymptotics to provide more reliable inference conditional only upon the data actually observed. The Bayesian models can be fitted using simulation methods. Model comparison is made using recently developed Bayesian model selection criteria. The above methodology is applied to a generated data and to a generated data and the Lawless(1982) failure times of electrical insulation.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.772-784
• /
• 2024

The hexagonal nodal code RENUS has been enhanced to handle irregularly deformed hexagonal assemblies. The underlying RENUS methods involving triangle-based polynomial expansion nodal (T-PEN) and corner point balance (CPB) were extended in a way to use line and surface integrals of polynomials in a deformed hexagonal geometry. The nodal calculation is accelerated by the coarse mesh finite difference (CMFD) formulation extended to unstructured geometry. The accuracy of the unstructured nodal solution was evaluated for a group of 2D SFR core problems in which the assembly corner points are arbitrarily displaced. The RENUS results for the change in nuclear characteristics resulting from fuel deformation were compared with those of the reference McCARD Monte Carlo code. It turned out that the two solutions agree within 18 pcm in reactivity change and 0.46% in assembly power distribution change. These results demonstrate that the proposed unstructured nodal method can accurately model heterogeneous thermal expansion in hexagonal fueled cores.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.1
• /
• pp.13-22
• /
• 2010

In this paper, we propose a management system for positioning and indicating the surveyed control point using RFID and UMPC. This system is composed of digital control point, management system and application. The digital control point transmits information of the surveyed control point and the management system receives the data from the digital control points and manages the scattered digital control points. The system offers three services for managing the surveyed control point. The first service is control point monitoring service for identifying the change of location, locating the missing control point and the second service is control point search service notifying selected control point to user, and the third service is control point land management service for editing the control point information in the land. Therefore, this system makes it easy for administrators to access the control point information of the scattered surveyed control point through the country and enhances the managing efficiency.

• Communications for Statistical Applications and Methods
• /
• v.7 no.3
• /
• pp.789-798
• /
• 2000

The mean residual function is the expected remaining life of an item at age x. The problem of trend change in the mean residual life is great interest in the reliability and survival analysis. In this paper, we develop a family of test statistics for testing whether or not the mean residual life changes its trend. The asymptotic normality of the test statistics is established. Monte Carlo simulations are conducted to study the performance of our test statistics.

• Proceedings of the Korean Statistical Society Conference
• /
• 2005.11a
• /
• pp.43-48
• /
• 2005

We consider the problem of testing for parameter changes in time series models based on a cusum test. Although the test procedure is well-established for the mean and variance in time series models, a general parameter case has not been discussed in the literature. Therefore, here we develop a cusum test for parameter change in a more general framework. As an example, we consider the change of the parameters in an RCA(1) model and that of the autocovariances of a linear process. We also consider the variance change test for unstable models with unit roots and GARCH models.

• Archives of Plastic Surgery
• /
• v.42 no.4
• /
• pp.419-423
• /
• 2015

Background Orthognathic surgery is required in 25% to 35% of patients with a cleft lip and palate, for whom functional recovery and aesthetic improvement after surgery are important. The aim of this study was to examine maxillary and mandibular changes, along with concomitant soft tissue changes, in cleft patients who underwent LeFort I osteotomy and sagittal split ramus osteotomy (two-jaw surgery). Methods Twenty-eight cleft patients who underwent two-jaw surgery between August 2008 and November 2013 were included. Cephalometric analysis was conducted before and after surgery. Preoperative and postoperative measurements of the bone and soft tissue were compared. Results The mean horizontal advancement of the maxilla (point A) was 6.12 mm, while that of the mandible (point B) was -5.19 mm. The mean point A-nasion-point B angle was $-4.1^{\circ}$ before surgery, and increased to $2.5^{\circ}$ after surgery. The mean nasolabial angle was $72.7^{\circ}$ before surgery, and increased to $88.7^{\circ}$ after surgery. The mean minimal distance between Rickett's E-line and the upper lip was 6.52 mm before surgery and 1.81 mm after surgery. The ratio of soft tissue change to bone change was 0.55 between point A and point A' and 0.93 between point B and point B'. Conclusions Patients with cleft lip and palate who underwent two-jaw surgery showed optimal soft tissue changes. The position of the soft tissue (point A') was shifted by a distance equal to 55% of the change in the maxillary bone. Therefore, bone surgery without soft tissue correction can achieve good aesthetic results.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.50-57
• /
• 2008

To change rail tracks from main track to another track, it needs a device that is called the turnout point. If the point which is composed of accurate parts and complex sensors does not work, And also, serious problems will be arisen. However, there are serious problems by the failure of the point. In this paper, after analyzing the failures of the conventional points, a new point is suggested. The proposed point is not affected by the surge caused by lightning.

• Journal of the Korean Chemical Society
• /
• v.40 no.1
• /
• pp.81-86
• /
• 1996

The physical properties of epoxy molding compound (EMC) according to the change of softening point of epoxy resin have been investigated in order to study the relationship between the properties of o-cresol novolac epoxy resin, which is main component of EMC for semiconductor encapsulation, and EMC. The softening points of used epoxy resin are 65.1 $^{\circ}C$, 72.2 $^{\circ}C$, and 83.0 $^{\circ}C$, respectively. The flexural strength and flexural modulus as mechanical properties were measured, and thermal expansion coefficient, thermal conductivity and glass transition temperature (Tg) as thermal properties, and spiral flow as moldability have been investigated to see the change of physical properties of EMC. The flexural modulus, thermal expansion coefficients in the glass state (${\alpha}_1$), and thermal conductivity of EMC were found to be keep constant value irrespective of the change of softening point, but Tg increased with softening point of epoxy resin, and the spiral flow decreased with that. It can be considered that these phenomena are due to the increase of crosslinking density of EMC according to the increase of softening point. The transition points were found out in the thermal expansion coefficient data in the rubbery state (${\alpha}_2$) and the flexural strength data. These can show the decrease of filler dispersion according to increase of epoxy resin viscosity.

• Journal of Korean society of Dental Hygiene
• /
• v.7 no.4
• /
• pp.395-403
• /
• 2007

The purpose of this study is to investigate the main factors that affect turnover of Dental Hygienists so that it leads to preventing high turnover and long-term service in their position. Data were obtained from 112 dental hygienists who are currently working for dental clinics from September 17th 2007 to October 16th 2007 via questionnaires. For this study, the demographic factors and unique characteristics of Dental Hygienists are considered as well as all the variables of statistic. The results derived from using SPSS 11.0 are as follows: 1. The average of job related factors is 2.55 point, the average of job satisfaction is 2.59 point, the average of salary related factor is 2.24 point and the average of changing their occupation is 2.85 point. 2. The difference between the factors related to age and changing their occupation shows the highest level on job related factors.(pM0.033) in the age between 26 and 30. 3. Dental Hygienists who are in their occupation for 6years to 9 years answer that salary would be the main reason to change their jobs. 4. For married dental hygienists, salary related factor is the main reason to make them change their occupation.(pM0.002)