• Journal of the Korean Institute of Landscape Architecture
• /
• v.18 no.3 s.39
• /
• pp.115-135
• /
• 1990

The purpose of this study was to suggest an improvement proposal for colors in urban environment with special regard to the surface color and their situations of apartment buildings in Seoul. For this goal, 167 cases of different color types of apartment buildings were surveyed. And, the survey was performed in the view of color by areas, by localtion, by builder, by paint year, by built year, by appearance of building, and by surface texture to prove the influencing factors on the surface colors. These collected data analyzed and compared with the existing studies to find out the changing trend of colors. The results are as follows : 1) The use of neutral gray($26.4{\%}$) and warm color(YR, Y, GY; 56.4%) were dominant and the usage trend of higher 'value'(87.4%) and lower 'saturation'(73.0%) was obvious. Especially, the use of PB and P was noticeable. 2) In comparing the existing studies, the changing trend in the surface color pattern was found. That is, neutral gray was used dominantly in 1970's, warm color(YR, Y)in the middle of 1980's. In the end of 1980's, warm color were also used dominantly same as before and GY, PB, P were used noticeably with some rising tendency of higher 'value' and lower 'saturation' was obvious. 3) The results of analysis by localtion shows that the different color groups might exist in Seoul city. Neutral gray and YR were dominant in zone I. Warm colors(YR, Y, GY)were prevailed in zone II, III, IV. In zone V, many colors were evenly used. In zone VI, middle values at warm color were dominant. Progressively, these color groups with further study could be considered in the color management in urban environment possibly. 4) Surface color of apartment buildings were different from their builders. 5) Concerned with the painted year, the use of higher 'value' and lower 'saturation' was increased gradually with the change of times. 6) the analysis by the built year revealed that the 'value' of surface colors on the old buildings was lower than that of the new ones. 7) The 'value' of colors on the surface with texture was higher than that of the surface without texture. 8) In the combination of two colors, the use of 'value' with difference at the same 'hue' was found harmonions in many cases, but the 'saturation' in usage was included in the ambiguity (Moon & Spencer's term). The ambiguity in color harmony should be improved in the near future.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.681-688
• /
• 2020

The Under Space Integrated Map has been constructed consistently from '15 construction projects until the present time in an effort to implement the "ground sinking prevention method" for the purpose of strengthening underground safety management. The constructed Under Space Integrated Map is utilized to provide information to the person in charge at local government through application of the system of underground information based on the administrative network and to deliver this to specialized underground-safety-effects -evaluation organizations through map extraction based on a floor plan. It suffers from a limitation in its practical use, however, since information is only provided, without promoting a separate renewal project. Although in Section 1 of Article 42 in the Special Law Concerning Underground Safety Management the content pertaining to submission obligations of completion drawings related to underground information including change and renewal are stated explicitly in order to solve this problem, submission is not sufficient since a submission window based only on the administrative network is operated. Accordingly, the Ministry of Land, Infrastructure, and Transport constructed an online system for submitting completion drawings, in an attempt to change the method by which entities involved in underground development directly submitted completion drawings. In this study, a DB standard relating to submitting completion drawings was designed and applied in order to construct an auto-renewal system based on submitted completion drawings, which will be extended to cover the range to underground structures hereafter.

• Korean Journal of Environment and Ecology
• /
• v.19 no.4
• /
• pp.375-384
• /
• 2005

This study was conducted selecting 44 places with a block unit subject to urban area in Gangnam-gu, to analyze a temperature change according to land use and green structure. In this study, it was used the broad-wide urban temperature, supported by Landset TM and ETM+ satellite image 6scene(1999${\~}$2002). The result of the research, the land use pattern has slightly influence on a temperature change of urban area. The result from correlation analysis between temperature and the factors affected by land cover type, such as building-to-land ratio(A correlation coefficient is 0.368${\~}$0.709) have positive correlation and green area ratio(a correlation coefficient is -0.551${\~}$-0.860) have negative correlation. The result from correlation analysis between temperature and green capacity of the land, crown projection area ratio, each factor have negative correlation with temperature, as showing that a correlation coefficient of green capacity of the land is -0.577(June 2006)${\~}$-0.882(June 1999) and crown projection area ratio's is -0.549(June 2001)${\~}$-0.817(June 1999). The result of the regression analysis for establishing urban area temperature change prediction model showed that green capacity of the land of the explanation variable was accepted.

• Journal of architectural history
• /
• v.22 no.2
• /
• pp.43-54
• /
• 2013

Compared to Early Chosun Dynasty, the spatial structure of most local Eupseongs of Korea had a standardized change with the expansion and spread of the Rye-hak(禮學:a study of confucius Rite). Meanwhile in the process of rebuilding Eupseongs there was a tendency of relocation of the local government offices(官衙) and its attached facilities in terms of functions and use. Although it was PyeongSanseong Miryang Eupseong had an unreasonable spatial structure locating Gaeksa(客舍; accommodation house for visitors) in the middle of the local government office complex, and Dongheon(東軒;main office building) in the east of it before the Japanese Invasion of Korea in 1592. However with the reorganization of spatial Structure of local Eupseongs after the Japanese invasion Gaeksa was moved to the foot of Adongsan where commanded a fine view of river. Dongheon was moved to the center of Eupseong for the effective management of its auxiliary organizations. It was because road system and administrative efficiency had a serious effect on deciding the location of the local government office and its attached facilities. After the Japanese invasion Hyangchoeng(鄕廳), having been out of Eupseong, also was moved to the independent location within Eupseong separate from Dongheon and Gaeksa. It seemed to take into account the autonomy of Hyangchoeng. Dongheon, Gaeksa, and Hyangchoeng which are the crucial facilities of Milyang Eupseong were arranged at each angular point of big triangle. In order to enhance the administative efficiency, the attached administrative facilities were arranged surrounding Dongheon and Hyangchoeng. The spatial structure of Milyang Eupseong in the late Choseon dynasty was of great difference from that of uniformly organized system of early Choseon Period. It was because the development of administrative function, the pursuit of efficiency, and commercial progress had a great impact on the change of urban space.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.202-207
• /
• 2008

Measures for coping with energy shortage are being sought all over the world. Following such a phenomenon, effort to use less energy in the design of buildings and equipment are being conducted. In particular, a program to evaluate the performance of a building comes into the spotlight. However. indispensable standard wether data to estimate the exact energy consumption of a building is currently unprepared. Thus, after appling standard weather data for four weather factors which were used in previous researches to Visual DOE 4.0, we compared it with the result of the existing data and evaluated them. For the monthly cooling and heating load of our target building, we used revised data for June, July, August, and September during which cooling load is applied. When not the existing data but the revised data was used, the research shows that an average of 14.9% increased in June, August, and September except for July. Also, in a case of heating load, the result by the revised data shows a reduction of an average of 11.9% from October to April during which heating load is applied. In particular, the heating loads of all months for which the revised data was used were more low than those of the existing data. In the maximum cooling and heating load according to load factors, the loads by residents and illumination for which the revised data was used were the same as those of the existing data, but the maximum cooling loads used by the two data have a difference in structures such as walls and roofs. Through the above results, the research cannot clearly grasp which weather data influences the cooling and heating load of a building. However, in the maximum loads by the change of weather data in four factors (dry-bulb temperature, web-bulb temperature, cloud amount, and wind speed) among 14 weather factors, the research shows that 5.95% in cooling load and 27.56% in heating load increased, and these results cannot be ignored. In order to make weather data for Performing energy performance evaluation for future buildings, the flow of weather data for the Present and past should be obviously grasped.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.3
• /
• pp.41-48
• /
• 2009

This study investigated the characteristics of spatial expansion/centralization and the spatial structural change of urban. The data used in analysis were urban population, employment, building floor area, and land price. The analysis was performed for the data of 1995, 2000, and 2005 during 10 years after 1995. The method of research was as follows; The movement of mean center and standard distance/standard deviation ellipse was estimated to investigate the urban growth change. The result of Moran's I analysis showed a clustered pattern, not a dispersed pattern, however; the effect was not significant. The town area requires the well-ordered urban planning such as land use. The contours map demonstrates that a monopole structure was generally transformed into a multicentralization structure. The development of mutural connection axis among central street roads was fragile.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.33-43
• /
• 2019

Considerable efforts have been made to reduce greenhouse gas emission around the world to cope with climate change. The government is implementing G-SEED certification to promote energy efficient building design. This study aims to verify the effectiveness of the G-SEED certification system by analyzing the actual energy use of certified and non-certified office buildings. For this purpose, the energy consumption of 135 certified and 142 non-certified office buildings was analyzed according to the seasonal characteristics, building size and number of floors, approval year, and certification grade. The energy saving effects of certified buildings was about 50% higher than that of non-certified buildings. The seasonal energy consumption of buildings is closely related to the heating degree-days. The energy consumption of certified and non-certified buildings decreases with increasing approval year. On the other hand, the energy consumption according to building size and certification grade is not related. This study provides meaningful basic data of G-SEED certification system for future improvement. As the building energy performance standards are strengthened over the years, it is necessary to make the individual score of G-SEED certified projects open to the public to configure the factors of energy efficiency.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.2 no.1
• /
• pp.9-15
• /
• 2002

As architectural forms tend to be large-scaled, high-storied and complicated, use of computer for processing design information has been generalized. However, CAD use in the process of developing architectural design has been neglected greatly in the educational field of architectural field due to the surging of recognition that it may limit the essential property of architectural design. It may be resulted from the limitation of CAD system, that is, it is because of tardy speed of application development for the related areas with the lack of simplicity and clarity of flexibility to be secured on the drawing and user interface. Recent CAD systems, however, overcome such a limitation, convert into object-based design from entity-based drawing, drafting and modeling for implementing design concept of architects and it connects with internet linked to superspeed information communication network and changes process and stream of architectural design. Therefore, this study deals with utility of object based CAD system with products of Autodesk Co. and consequently obtain the following conclusions. First, it expands architect's design areas by supporting cooperative design system based on model-based architectural design and internet. Second, it reduces consumption of personal and material resources and time in the process of drawing production for improving architectural design works. Third, it can reduce the frequent design changes by improving understanding of architectural space with visualization of immediate 3D information, escaping from traditional methods to deliver design information to building owner through 2D drawing or model and perspective drawing requiring much cost and time. Fourth, it keeps exactness without omission or duplication of design information and generate and renew information of all related drawings on a drawing. Fifth, it is possible to change difficult and boring architectural design work into a pleasure owing to immediate modeling and drawing of design idea. In addition, digital drawing generated by using object-based CAD system can playa role of establishing Urban Information System to be used for protecting from building in disaster and urban disasters in connection with GIS numerical map and be used for reference of all kinds of information required fro post-management of buildings. However, what is more important is that surplus time from introduction of object-based CAD system should be used for consideration to be recognized as a good space and building built as a product of this project for comfort to urban people.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.2
• /
• pp.40-52
• /
• 2011

In this study, $CO_2$ emission quantities by spatial characteristics using GIS were investigated for building a $CO_2$ emission inventory. Eventually, this study provides the guidelines to build the urban spatial structure for reducing greenhouse gas and contributes to the transition to environmental friendly green city. The attribute data for GIS were energy (electricity and gas) usage in the city of Daegu for 2009 and used for Tier 1 as suggested by the IPCC guideline to estimate amount of $CO_2$ emission. The spatial data were built based on land use types categorized by building purposes with connecting building registers to cadastral maps for Daegu city. Spatial $CO_2$ emission quantities could be calculated by combining $CO_2$ emission inventory for energy and GIS. Also, $CO_2$ emission characteristics were different by land use types.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.1
• /
• pp.3-14
• /
• 2018

An apartment complex is a building use with great potential to contribute to solving problems related to urban ecological environment and climate change. The first goal of this study is to grasp the current situation of application and limitations of the ecological area rate, which is a representative evaluation index used to evaluate the environmental performance of the external space of an apartment complex in Green Standard for Energy and Environmental Design (G-SEED). The second goal is to propose a prototype of the evaluation index for evaluating greenhouse gas (GHG) reduction performance in order to supplement the evaluation index for the environmental performance of the external space in terms of response to climate change. We analyzed 43 cases of apartment complexes certified according to G-SEED, which was enforced since July 1, 2010, and found application characteristics of each space type and the limitations of ecological area rate. We analyzed overseas green building certification systems such as LEED and BREEAM that derived implications for supplementing the limitations of ecological area rate, which is focused on the evaluation of soil and water circulation function, and set up a development direction of complementary measures. Through analysis of previous studies, relevant regulations and standards, and technical documents of the manufacturer, the heat island mitigation performance of the pavement and roof surfaces of the apartment complex and the carbon uptake performance of the trees in the apartment complex was selected as parameters to yield the GHG reduction performance of the external space of the apartment complex. Finally, a quantitative evaluation method for each parameter and a prototype of the evaluation index for the GHG reduction performance were proposed. As a result of applying the prototype to an apartment complex case, the possibility of adoption and applicability as an evaluation index of G-SEED were proved.