• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1563-1570
• /
• 2015

Conformational change during chain propagation of alanine oligomer was investigated by quantum chemical calculation(QCC) using 2~5mers(${\times}=2{\sim}5$) models. For estimation of the end group effects, two types of end group. "amide type" ($CH_3CONH-and-CONHCH_3$) and "methyl type" ($CH_3CONH-and-CONHCH_3$), were prepared as both ends(N-and-C). Conformers optimized for 5-mer converged to three types of ${\Phi}/{\Psi}$ : ${\alpha}$-helix(g+/g+, or g-/g-), PPII-like(extended helix-like, g+/g-, or g-/g+), and ${\beta}$-extended (t+/t-, or t-/t+), in the order of lower energy, and the energies of left- and right- handed conformers were the same (5-mer. amide type ${\Delta}E=-1.05$, right type ${\Delta}E=-1.62$). Energies of the monomer unit(${\Delta}E$) of ${\alpha}$-helix decreased with increases of monomer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9B
• /
• pp.1527-1533
• /
• 2000

Basically, a general characterization procedure based on the extraction of the characteristic impedance and propagation constant for analyzing a single MIS(Metal-Insulator-Semiconductor) transmission line is used. In this paper, an analysis for a new substrate shielding MIS structure consisting of grounded cross-bars at the interface between Si and SiO2 layer using the Finite-Difference Time-Domain (FDTD) method is presented. In order to reduce the substrate effects on the transmission line characteristics, a shielding structure consisting of grounded cross bar lines over time-domain signal has been examined. The extracted distributed frequency-dependent transmission line parameters and corresponding equivalent circuit parameters as well as quality factor have been examined as functions of cross-bar spacing and frequency. It is shown that the quality factor of the transmission line can be improved without significant change in the characteristic impedance and effectve dielectric constant.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.39-39
• /
• 2012

Data assimilation techniques have received growing attention due to their capability to improve prediction in various areas. Despite of their potentials, applicable software frameworks to probabilistic approaches and data assimilation are still limited because the most of hydrologic modelling software are based on a deterministic approach. In this study, we developed a hydrological modelling framework for sequential data assimilation, namely MPI-OHyMoS. MPI-OHyMoS allows user to develop his/her own element models and to easily build a total simulation system model for hydrological simulations. Unlike process-based modelling framework, this software framework benefits from its object-oriented feature to flexibly represent hydrological processes without any change of the main library. In this software framework, sequential data assimilation based on the particle filters is available for any hydrologic models considering various sources of uncertainty originated from input forcing, parameters and observations. The particle filters are a Bayesian learning process in which the propagation of all uncertainties is carried out by a suitable selection of randomly generated particles without any assumptions about the nature of the distributions. In MPI-OHyMoS, ensemble simulations are parallelized, which can take advantage of high performance computing (HPC) system. We applied this software framework for several catchments in Japan using a distributed hydrologic model. Uncertainty of model parameters and radar rainfall estimates is assessed simultaneously in sequential data assimilation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.3
• /
• pp.283-291
• /
• 2002

Since GPS's SA cancellation, the interest is converged in correction of errors such as atmospheric delay and multipath that weight had been small relatively, which can improve the accuracy of positioning through modelling research. The aim of this study have an extensive comparison of the various tropospheric delay models (Goad&Goodman, A&K, Hopfield and Sasstamoinen) and mapping functions(Niell, Chao, and Marini). Expecially, the tropospheric delay amounts by change of the GPS satellite elevations, and the delay by various combination between zenith delay models and mapping functions, compared and examined. For this, programmed the total delay models and the combined models which can be described as a product of the delay at the zenith and a mapping function. The result of study, especially, as the minimum elevation of included data is reduced under $10^{\circ}$, it was considered to be reasonable that the prediction of tropospheric delay considering combination and mapping character of functions about the transition of the zenith delay to a delay with arbitrary zenith angle.

• The KIPS Transactions:PartC
• /
• v.18C no.6
• /
• pp.433-440
• /
• 2011

In this paper, we propose a new scheduling method that can guarantee reliable jitter by minimizing the queue length variation in the streaming service provisioning such as IPTV and VoD. The amount of traffic to be delivered within a certain time is very fluid because MPEG-4 and H.264 encoders use VBR(Variable Bit Rate) for delivering video streaming traffic. This VBR characteristic increases the end-to-end propagation delay variation when existing scheduling methods are used for delivering video frames. Therefore, we propose the new scheduling method that can minimize change rate of queue length by adaptively controling service rate taking into account the size of bulk incoming packets and arrival rate for bulk streaming traffic. Video frames can be more reliably transmitted through the minimization of the queue length variation using the proposed method. We use the queueing model and also carry out OPNET simulation to validate the proposed method.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.4
• /
• pp.262-265
• /
• 2009

This study was conducted to find out a proper cutting time as related with a growth pattern for the mass propagation of Corylopsis coreana, which is one of the Korean endemic plant. New shoots began to grow in early April soon after end of blooming time and grew rapidly until the end of June. Shoot growth became dull after June and stopped in early September, showing a typical primary growth curve of temperate deciduous trees which show only one flush of growth throughout an annual growth cycle. The moisture content of shoot was the highest in an early growing season of May, and decreased with shoot maturity. Moisture content of cuttings taken on June 20 was 71.2%. Rooting was better in softwood cuttings than in hardwood cuttings. The highest value of rooting percentage was obtained in cuttings taken on June 20.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.15-15
• /
• 2015

기존 기후변화 영향평가 불확실성 연구들은 거의 대부분 GCM의 불확실성이 가장 크다고 결론내리고 있으나, ES 불확실성과의 정량적 비교는 하지 못했으며, 기존 접근방법은 민감도 분석 수준에 머무르고 있다. 이에 본 연구에서는 기후변화 영향평가 각 단계별 불확실성을 포괄적으로 정량화하고 수행단계별 불확실성의 전파정도를 추정할 수 있는 새로운 approach를 제안하였다. 첫째, 전체 불확실성, 각 단계별 불확실성 증가 정도, 각 단계별 불확실성의 비율을 제시할 수 있는 새로운 approach를 제안하였다. 또한 불확실성을 정량적으로 추정할 수 있는 방법으로 maximum entropy(이하 ME)를 선정하였으며, 이를 본 연구에서 제시한 approach에서 적용성을 살펴보았다. 둘째, 본 연구에서는 기후변화 영향평가 불확실성 단계별 정량화를 위해 2개 배출시나리오, 4개 GCM 시나리오, 2개 상세화기법, 2개 수문모형을 사용하여 기본적 기후변화 영향평가 단계를 모두 수행하였다. 기존 approach에서는 GCMs의 변화율(89.34)이 가장 커 GCMs의 불확실성이 가장 큰 것으로 나타났으나 제시한 approach에서는 배출시나리오의 불확실성이 전체 대비 58.66 %로 기후변화 영향평가에서 가장 큰 불확실성 발생 원인으로 파악되었다. 모형 불확실성에서는 GCMs의 불확실성(전체 대비 33.57 %)이 가장 높게 나타났다. 또한 배출시나리오의 ME는 3.32, GCMs의 ME는 5.22, 상세화기법의 ME는 5.57, 수문모형의 ME는 5.66으로 단계적으로 불확실성이 증가하였다. 다음으로 유량과 강수를 이용하여 불확실성 정량화를 수행하였으며, 강수를 이용한 불확실성 정량화에서는 유량을 이용한 결과와 다르게 배출시나리오 다음으로 상세화기법의 불확실성이 큰 것으로 나타나 어떤 수문변수에 초점을 두느냐에 따라 불확실성 정량화저감 노력 대상이 달라질 수 있음을 제시하였다. 마지막으로 자연변동성에 의한 불확실성이 기후변화 전체 불확실성의 45.47 % 정도로 나타났으며, 이는 미래 기후변화에 의해 발생하는 불확실성이 과거 자연변동보다 2배 이상으로서, 기후변화에 의한 미래전망의 불확실성이 매우 크게 증가한다는 매우 중요한 결과를 제시하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.2
• /
• pp.60-67
• /
• 2019

To understand the low frequency instability(LFI) characteristics in hybrid rockets combustion, effects of equivalence ratio variations on the phase shift between pressure and heat release oscillations were investigated by using the direct numerical simulation. The change in the equivalence ratio of the main chamber was simulated by the temperature and composition variation of the combustion gas introduced into the post-combustion chamber. In the results, additional combustion appeared along with vortex generation at the backward step, and combustion pressure and heat release oscillations were observed as the vortex moved. In addition, the results confirmed that the phase difference between the pressure and heat release oscillation shifts because of the changes in the propagation velocity of pressure wave as the temperature of combustion gas changes.

• Advances in concrete construction
• /
• v.13 no.1
• /
• pp.83-99
• /
• 2022

The two, NBD and SCB tests using gypsum circular discs each containing a single notch have been experimentally accomplished in a rock mechanics laboratory. These specimens have also been numerically modelled by a two-dimensional particle flow which is based on Discrete Element Method (DEM). Each testing specimen had a thickness of 5 cm with 10 cm in diameter. The specimens' lengths varied as 2, 3, and 4 cm; and the specimens' notch angles varied as 0°, 45° and 90°. Similar semi-circular gypsum specimens were also prepared each contained one edge notch with angles 0° or 45°. The uniaxial testing machine was used to perform the experimental tests for both NBD and SCB gypsum specimens. At the same time, the numerical simulation of these tests were performed by PFC2D. The experimental results showed that the failure mechanism of rocks is mainly affected by the orientations of joints with respect to the loading directions. The failure mechanism and fracturing patterns of the gypsum specimens are directly related to the final failure loading. It has been shown that the number of induced tensile cracks showing the specimens' tensile behavior, and increases by decreasing the length and angle of joints. It should be noted that the fracture toughness of rocks' specimens obtained by NBD tests was higher than that of the SCB tests. The fracture toughness of rocks usually increases with the increasing of joints' angles but increasing the joints' lengths do not change the fracture toughness. The numerical solutions and the experimental results for both NDB and SCB tests give nearly similar fracture patterns during the loading process.

• Korean Journal of Optics and Photonics
• /
• v.32 no.4
• /
• pp.180-186
• /
• 2021

Fluorinated polyimide has excellent light transmittance and a high optical refractive index, and is useful for producing optical-waveguide phase modulators with low optical loss and low electric power consumption. In this work, an optical-waveguide phase modulator is designed and fabricated based on a high-refractive-index fluorinated polyimide, and its characteristics are measured. An efficient protocol for characterizing the loss components of the optical waveguide is proposed, and the propagation loss of the fabricated polyimide optical waveguide is confirmed to be 0.9 dB/cm. The phase modulator requires 9.1 mW of power for phase change of π, and the response time is 290 μs, which is improved by tenfold compared to a previous demonstration of polymeric phase modulators.