• Asian Journal of Turfgrass Science
• /
• v.25 no.2
• /
• pp.223-228
• /
• 2011

This research was performed to investigate change of green speed according to growth of grass, for this, the method of effective green management for improvement of green speed was searched by investigating green density, soil moisture, surface hardness, and mowing height every day for 6 months. As the result of the study, reliability between, green density, soil moisture, surface hardness, mowing height and green speed were measured to be respectively 0.4742, 0.5690, 0.4632, 0.2806, i.e. soil moisture is considered as the factor which affects green speed the most. Therefore, it will be an advantageous environment to maintain soil moisture a little bit low to improve green speed within the range that does not disrupt the growth of green. In case of green density, it is considered to be effective to get a fast green speed when obtaining enough density during May~June, the most vigorous growth period and at the same time green up period. Surface hardness was confirmed that management work as rolling is a considerably effective method to increase hardness. However, rolling gives high stress to the green, combining another management work as regular hilling could be a good alternative. Reliability of green preview and green speed was 0.2806, lower than soil moisture or surface hardness. Through the results, it was confirmed that management of mowing height to be low less than 3.00 mm is helpful to improve green speed, timely, and it is advantageous to manage green speed when adjusting mowing height during the vigorous growth period of bent grass. However, considering the range of mowing height was not various, being 2.9~3.4 mm, henceforth research on investigation of green speed at more various mowing heights would be necessary. Consequently, except mowing height, other three factors, i.e. green density, soil moisture and surface hardness were investigated to have considerable level of reliability on green speed, and it is considered that each factor affects green speed respectively according to green condition and time. Accordingly, in order for the manager to maintain high speed all year round, intensive care for each factor per time unit considering green growth condition is considered to be necessary.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.9-14
• /
• 2009

Purpose: Nowadays in the nuclear medicine, many studies and efforts are being made to reduce the scan time, as well as the waiting time to be needed to execute exams after injection of radionuclide medicines. Several methods are being used in clinic, such as developing new radionuclide compounds that enable to be absorbed into target organs more quickly and reducing acquisition scan time by increase the number of Gamma Camera detectors to examine. Each medical equipment manufacturer has improved the imaging process techniques to reduce scan time. In this paper, we tried to analyze the difference of image quality between FBP, 3D OSEM reconstruction methods that commercialized and being clinically applied, and Astonish reconstruction method (A kind of Iterative fast reconstruction method of Philips), also difference of image quality on scan time. Material and Methods: We investigated in 32 patients that examined the Bone SPECT from June to July 2008 at department of nuclear medicine, ASAN Medical Center in Seoul. 40sec/frame and 20sec/frame images were acquired that using Philips‘ PRECEDENCE 16 Gamma Camera and then reconstructed those images by using the Astonish (Philips’ Reconstruction Method), 3D OSEM and FBP methods. The blinded test was performed to the clinical interpreting physicians with all images analyzed by each reconstruction method for qualitative analysis. And we analyzed target to non target ratio by draws lesions as the center of disease for quantitative analysis. At this time, each image was analyzed with same location and size of ROI. Results: In a qualitative analysis, there was no significant difference by acquisition time changes in image quality. In a quantitative analysis, the images reconstructed Astonish method showed good quality due to better sharpness and distinguish sharply between lesions and peripheral lesions. After measuring each mean value and standard deviation value of target to non target ratio with 40 sec/frame and 20sec/frame images, those values are Astonish (40 sec-$13.91{\pm}5.62$ : 20 sec-$13.88{\pm}5.92$), 3D OSEM (40 sec-$10.60{\pm}3.55$ : 20 sec-$10.55{\pm}3.64$), FBP (40 sec-$8.30{\pm}4.44$ : 20 sec-$8.19{\pm}4.20$). We analyzed target to non target ratio from 20 sec and 40 sec images. And we analyzed the result, In Astonish (t=0.16, p=0.872), 3D OSEM (t=0.51, p=0.610), FBP (t=0.73, p=0.469) methods, there was no significant difference statistically by acquisition time change in image quality. But FBP indicates no statistical differences while some images indicate difference between 40 sec/frame and 20 sec/frame images by various factors. Conclusions: In the circumstance, try to find a solution to reduce nuclear medicine scan time, the development of nuclear medicine equipment hardware has decreased while software has marched forward at a relentless. Due to development of computer hardware, the image reconstruction time was reduced and the expanded capacity to restore enables iterative methods that couldn't be performed before due to technical limits. As imaging process technique developed, it reduced scan time and we could observe that image quality keep similar level. While keeping exam quality and reducing scan time can induce the reduction of patient's pain and sensory waiting time, also accessibility of nuclear medicine exam will be improved and it provide better service to patients and clinical physician who order exams. Consequently, those things make the image of department of nuclear medicine be improved. Concurrent Imaging - A new function that setting up each image acquisition parameter and enables to acquire images simultaneously with various parameters to once examine.

• Korean Security Journal
• /
• no.14
• /
• pp.367-388
• /
• 2007

Some of individuals working at various fields of security guard are given the legal right to use a gun to cope with expected risks and crimes. Not only in Korea but also throughout the world, a pistol is being used as a device for the workers of security guard such as the army, the police and intelligence agencies to keep the law and social order. A pistol, which is regarded as the last safety measure of security guard, is easy to carry but, because of its short barrel for high portability, its hit ratio and long-range shooting performance are much lower than ordinary guns. Despite such weak points, a pistol can be a great tool because of its high portability and if the users make steady efforts to improve their skills and, for this reason, it has been being used widely until now. National agency workers' pistol shooting skills depend on several important factors, but for the fast and accurate shooting, the mot important factor is how to aim at the target. Because it takes a relatively longer time to align the sight on the target, the change of the sight alignment method is expected to improve pistol shooting skills a lot. In Korea, however, most of national agency training centers teach the basic aiming method that crosses the foresight and the backsight and aligns the crossing to the target. That is, they teach the sight alignment method for fixed targets. Some agencies in Korea and foreign countries that have used guns more frequently and longer than us are teaching different sight alignment methods as well. Representative ones of them are aiming only with the foresight and pointing shooting. These aiming methods are expected to produce good results against moving targets. While the basic sight alignment method has to cross the foresight and the backsight and then to align the crossing to the target, so takes a longer time than other aiming methods, the other two aiming methods are expected to be effective in fields where both swiftness and accuracy are require. Because domestic agencies are teaching mainly the basic sight alignment method, the present study purposed to examine the effects of different aiming methods on shooting records and ultimately to contribute to national agency workers' operation. For this purpose, we selected 20 policemen from local police commandos under the National Police Agency who were accustomed to pistol shooting and measured their pistol shooting. According to the results, the pointed shooting method showed the best record in 5m short.range shooting. As to hit ratio in 15m shooting, which is relatively long.range for pistol shooting, the basic aiming method showed the best record, but the results of statistical analysis showed that pointed shooting is most superior. Of course, the results were obtained from a group who were used to and skillful in pistol shooting, but they are considered meaningful in that all the police and national agency workers should have such high shooting skills.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.2
• /
• pp.300-308
• /
• 2014

The purpose of this study was to investigate the night eating habits of middle schoolers. A total of 705 middle school students residing in Gyeonggi were surveyed about their dietary habits related to night eating. Among the total subjects, 59.9% (n=422) had night eating more than once a week and were classified into a night eating group (NEG). The main reason for night eating was hunger (79.1% of NEG) and the highest proportion of night eating was related to food purchased by family (39.3% of NEG). Most of the NEG had night eating in their home with family members, and the time with highest frequency of night eating was between 10 p.m. and 11 p.m.. About 33% of the NEG went to bed within an hour after night eating and 69.2% of the NEG did not report any change after night eating. The most common factors considered when choosing a night eating menu, in order of frequency, were taste, hygiene, and amount. The favorite items on the night eating menu were frozen desserts, fresh fruits, chicken, fruit juice, Ramen, pizza, and Jajangmyeon. The most frequent menu choices were fresh fruits, frozen desserts, Ramen, chicken, yogurt, and fruit juice. The NEG had higher scores for picky eating (P<0.01), overeating (P<0.01), salty eating (P<0.01), and irregular meal times (P<0.001) compared to the non-NEG. Consequently, the NEG had more dietary problems than the non-NEG and their night eating behaviors were related to family habits. Night eating was mainly dominated by a diet of carbohydrates and fats, and the intake frequency and preference for foods with low nutritional value were high; thus, a practical and systematical nutrition education is required. Seasonal and comparative studies on night eating status according to various times and amounts of night eating are also required.

• Journal of Wetlands Research
• /
• v.22 no.3
• /
• pp.194-199
• /
• 2020

Unlike in the past, the world is facing water shortages due to climate change and difficulties in simultaneously managing the risks of flooding. The Four Major Rivers project was carried out with the aim of realizing a powerful nation of water by managing water resources and fostering the water industry, and the construction period was relatively short compared to the unprecedented scale. Therefore, the prediction and analysis of how the river environment changes after the Four Major Rivers Project is insufficient. Currently, part of the construction section of the Four Major Rivers Project is caused by repeated erosion and sedimentation due to the effects of sandification caused by large dredging and flood-time reservoirs, and the head erosion of the tributaries occurs. In order to solve these problems, the riverbed maintenance work was installed, but it resulted in erosion of both sides of the river and the development of new approaches and techniques to keep the river bed stable, such as erosion and excessive sedimentation, is required. The water agent plays a role of securing a certain depth of water for the main stream by concentrating the flow so much in the center and preventing levee erosion by controlling the flow direction and flow velocity. In addition, Groyne products provide various ecological environments by forming a natural form of riverbeds by inducing local erosion and deposition in addition to the protection functions of the river bank and embankment. Therefore, after reviewing the method of determining the shape of the Groyne structure currently in use by utilizing the mobile limit flow rate and marginal reflux force, a new Critical Movement Velocity(${\bar{U}}_d$) and a new resistance coefficient formula considering the mathematical factors applicable to the actual domestic stream were developed and the measures applicable to Groyne installation were proposed.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.3
• /
• pp.255-263
• /
• 2015

To investigate the effect of the weathering process of biotite on Cs sorption, sorption experiment of Cs with $10^{-3}M$ solution was carried out on the biotite reacted at different reaction times at pH 2 and 4, and 1 M solutions of Na, K, Ca, Mg, Rb, and Cs. Peak changes were observed for some samples by XRD, indicating that new mineral phase formed by biotite weathering. Among several factors, cations in solutions have the most significant influence on the mineralogical changes. The samples reacted with Na showed the most outstanding change with increasing peak width and appearance of $12{\AA}$ peak and $14{\AA}$ peak. This new peaks indicate the formation of hydrobiotite and vermiculite. The new peaks had stronger peak intensity for the sample reacted at pH 4 than that at pH 2, probably due to the fast dissolution of small particles and edges and resultant decrease in the formation of expandable layers. The biotite reacted at Mg solution showed small intensity at $14{\AA}$. Based on XRD results, the degree of biotite weathering was in the order of Na, Mg, and Ca. The samples reacted with K, Rb, Cs solutions did not show noticeable mineralogical changes caused by weathering. The amount of sorbed Cs on weathered biotite showed close relationship with the degree of weathering indicated by XRD. At both pH 2 and 4, the biotite reacted with Na solution showed the highest Cs sorption, and those with Mg and Ca solutions showed the next highest ones. The sorbed amounts of Cs on the bitote reacted with K, Rb, Cs solutions were relatively low. This indicates that at the Cs concentration ($10^{-3}M$) which we used for this experiment and which was much higher than the maximum Cs concentration sorbed on the frayed edge site, expandable layer plays more important role than frayed edge. In the cases of K, Rb, and Cs solutions, Cs sorption was decreased because K is the same cations as the one in the interlayer or the sorption of Rb and Cs on the frayed edge prevents the formation of expandable layers.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.3
• /
• pp.147-153
• /
• 2013

Functional game, which is the combination of play and learning and a futuristic tool, can minimize the dysfunction and maximize the proper functions, and furthermore, has taken root as a new alternative that can change the game industry and game culture. Recently, the focus of game and education markets is shifting to the development of more advanced learning contents, rather than emphasizing the self-control and motivation of users. Along with that, the game market has excluded the socially dysfunctional elements, such as the addiction and learning disabilities, and has witnessed a diversification into the human-friendly entertainment business that emphasizes the mental and physical health and pursues scientific educational effects. In addition, functional games are expanding its reach from the professional sectors - such as medical aide/medical learning, military simulation, health, auxiliary tools, special education and learning tools - to the realm of routine education, mental health, etc., and has seen a steady growth. However, most functional games, which are being currently planned and developed to cope with the special characteristics of the market, have not undergone accurate scientific assessment of their functions and have not proven their effectiveness. An overwhelming proportion of the functional games are being developed based on the intuition and experience of game developers. Moreover, the type of games, which involve the repetition of simple tasks or take the form of simple puzzles, cannot effectively combine the practically interesting factors and the learning effects. Most games incorporate unscientific methods leading to the vague anticipation of improvement in functions, rather than the assessment of human functions. In this paper, a study was conducted to present the measures that could maximize the effects of functional games in relation to the changes in the visual and auditory stimulations in order to maximize the effects of functional games, i,e., the immersion and concentration. To compare the degree of effects arising from the visual stimulation, the functional game contents made in the form of 2D and 3D were utilized. In addition. ultra sound and 3-dimensional functional game contents were utilized to compare the degree of effects resulting from the changes in the auditory stimulation. The brainwave of the users were measured while conducting the experiments related to the response to the changes in visual and auditory stimulations in 3 steps, and the results of the analysis were compared.

• Pediatric Infection and Vaccine
• /
• v.13 no.2
• /
• pp.130-136
• /
• 2006

Purpose : The purpose of this study is to confirm the epidemiologic change of the causative organisms of neonatal and pediatric bacterial meningitis in Korea. And we tried to evaluate the risk factors correlated with prognosis which was available on the day of admission. Methods : Retrospectively, we reviewed the medical records of 57 patients admitted for bacterial meningitis at six hospitals affiliated with Catholic Medical Center for 6 years(Jan. 2000~Dec. 2005). Results : 22 cases(38.6%) of them were neonates under 28 days and 35 cases were infants and children ; 16 cases(28.1%), under 1 year ; 6 cases(10.5%), under 5 years ; 13 cases (22.8%), under 15 years. In neonates, 16 cases(72.7%) were caused by group B streptococcus (GBS). In infants and children, S. pneumoniae(25.7%), H. influenzae type b(Hib)(22.8%) and N. meningitidis(22.8%) were common cause of bacterial meningitis in order. In the informations available on the day of admission, weight deficit for age under 3 percentile, increased CRP level and decreased glucose level of CSF were related to poor prognosis(P<0.05). Conclusion : GBS became a leading cause of neonatal bacterial meningitis. Though, pneumoccocal, Hib and meningococcal meningitis were confirmed as major causes of bacterial meningitis. The routine immunization of pneumococcal and Hib vaccines will be considered, and it is necessary to introduce meningococcal vaccines to our country in the future.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.1
• /
• pp.3263-3291
• /
• 1974

Experimental work of grain bin was carried out to develop the methods of natural air in-bin drying and storage. The method is considered to be more economical, labour saving, and an effective countermeasure to grain loss. To examine the possibility of farm use of the grain bin and to analyze the related factors concerned with in-bin grain drying and storage, ambient air conditions (especially the change of air temperature and relative humidity) and grain quality during drying and storage periods were investigated. A laboratory model bin was constructed to investigate the effect of different forced air conditions on the drying characteristics of rice. In addition, a grain bin with 2.2m diameter and 1.8m height, considered to be the optimum size for the average Korean farm, was constructed and tested to examine the drying and storing characteristics of rice. The weather data analyzed in this study was the nine-year (from 1964 to 1972) record of air temperature and relative humidity in the Suweon area, and the thirty-year (from 1931 to 1960) record of pentad normal relative humidity and air temperature in the Seoul area. From the results of the weather data analyses, the adequate air delivery hours (which was arbitrary defined as the condition to give less than 75% relative humidity) to dry the rice during October were about nine hours (from approximately 10 A.M. to 7 P.M, ) a day, in which the average air temperature was about 15.9$^{\circ}C$ and average relative humidity was 66%. The occurence of days having three hours of such conditions was 1, 2, and 1-day within the 1st, 2nd add last 10-day periods for the month of October, respectively. Therefore, it may be considered that the weather condition in October was satisfactory for the forced natural air drying. The results of the laboratory model bin test were analyzed to obtain the drying curve and drying rate for different drying stages and grain layers in the bin corresponding to various conditions of forced natural air. A drying experiment with a prototype grain bin showed that an approximate 5 percent grain moisture gradient through a 1.6 meter grain deposit was observed after 80 hours of intermittent drying, giving an over dried zone in the lower grain layers and an extremely high grain moisture zone in the upper layers. This indicates that an effective measure should be taken to reduce this high moisture gradient. In order to investigate the drying characteristics of bulk grain in a layerturning operation a grain bin test was performed. This showed a significant improvement of uniform drying. In this test, approximate 107 hours were required to dry a depth of 1.6 meter of grain from an initial moisture content of 22.2 percent to a moisture content of 16.7 percent using an air delivery rate of 2.8 cubic meter per a minute per every cubic meter of grain. This resulted in a 2 percent moisture gradient from the top to the bottom of the bin. During storage period, till the end of June the average temperature of grain was 2~3$^{\circ}C$ higher than ambient air temperature. But during July when the grain moisture content went up slightly (less than 1 percent), the average temperature of the grain also increased to 3~5$^{\circ}C$ higher than ambient air temperature. It is therefore recommended that for safe grain storage, grain should not be stored in sheet metal bins after mid May. From the above results, in-bin rice drying and storage can be used effectively on Korean farms. It is strongly recommended that the use of grain-bin system should be implemented for farm use to improve farm drying and storage of rice.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.3
• /
• pp.220-225
• /
• 2010

Soybean sprouts produced at optimal temperature are placed or displayed for several days in market shelf of relatively cool temperature (ca. $13^{\circ}C$). During this period a number of changes occur including changes in color, smell, taste, nutritional quality, etc. In order to investigate the changes of these factors, soybean sprouts packed in plastic film bag (OPP+PE) were stored at the two different temperature ($3^{\circ}C$ and $13^{\circ}C$). Morphological characters, physicochemical changes and enzymes activity related to visible quality (color) of soybean sprouts were examined. The numbers of fine roots were greater and hypocotyls were longer in soybean sprouts stored at $13^{\circ}C$, although there was no significant difference in diameter, fresh weight and dry weight of hypocotyls between the two storage temperatures. Browning of hypocotyl, as an indicator of a typical deterioration in sprout quality, was highly dependent on the activity of polyphenol oxidase (PPO). Considering the low level of soluble protein in hypocotyls, the relatively higher activity of PPO suggested a critical role of PPO in stored soybean sprouts. PPO activity of sprouts stored at $13^{\circ}C$ was 2-fold higher than that of sprouts stored at $3^{\circ}C$ after 4 days. In sprouts stored at $13^{\circ}C$, the PPO activity was increased from day 0 until 6 days and since then, it was not detected. Crude protein content was increased to 30.9~35.4% based on dry weight with extended storage period. The change in crude protein was greater in sprouts stored at high temperature ($13^{\circ}C$). Total free amino acid content was increased in both temperatures. However, the changing rate of free amino acid was greater in sprouts stored at $13^{\circ}C$.