• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.507-508
• /
• 2016

본 논문은 LLC 공진형 풀-브릿지 컨버터의 온도에 따른 Q-factor의 변화를 고려한 PFM(Pulse Frequency Modulation) 제어기법에 대해 제안한다. 온도에 따라 L, C의 용량변화로 Q-factor는 변화하고 얻고자 하는 전압이득 값을 스위칭 주파수가 달라지는 제어로 원하는 출력 전압을 얻을 수 있다. 원하는 출력전압을 제어하기 위해서는 온도에 따라 변화하는 Q-factor를 통해 스위칭 주파수를 제어하여 원하는 전압이득 값을 얻는다.

• 한국유체기계학회 논문집
• /
• 제2권3호
• /
• pp.17-23
• /
• 1999

In the present numerical analysis, investigation of the effect of blade loadings from design shape on the slip factor variation was studied. Both the Eckardt radial bladed impeller and the backswept impeller were analyzed. In addition, a new design of the blade profile was arbitrarily attempted to generate a center-loading pattern in the original backswept impeller. Three dimensional compressible Navier-Stokes flow analysis with the Baldwin-Lomax turbulence model was applied to get the numerical slip factor at each impeller exit plane using the mass-averaging technique. The numerical slip (actors are in good agreement with the experimental ones and the Wiesner's slip factors deviate further from the numerical and experimental ones in both backswept impellers. Deviation angles and meridional channel loadings are found in no relation with the trend of change of the slip factor. Blade-to-blade loadings in midspan location are, however, found to have a direct relationship, especially at the sections where maximum loadings we to be expected. That information can be utilized in establishing an improved expression for slip factors in the future.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.241-245
• /
• 1988

This paper reports the experiments regarding to diagnosis techniques for power transformers by measuring dissipation factor and moisture contents of mineral oils. Thermal aging environments of mineral oils were varied by the specially designed systems. Thermal aging of elevated temperature of $90^{\circ}C$ was performed for about 240 and 460 hours, respectively. Dissipation factor, permittivity, and water content were measured. Our test samples were not exposed to air. Dissipation factor increased while permittivity did not change. The level of dissipation factor determining the insulating quality of mineral oil was compared with the previous results of resistivity and several correction factor.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.115-119
• /
• 2001

Contaminant retardation factor is derived from the colloidal and contaminant transport equations for a four-phase porous medium: an aqueous phase, two mobile colloidal phases, and a solid matrix. It is assumed that the contaminant sorption to solid matrix and colloidal particles and the colloidal deposition on solid matrix follow the linear isotherms. The behavior of the contaminant retardation factor in response to the change of model parameters is examined employing the experimental data of Magee et al. (1991) and Jenkins and Lion (1993). In the four-phase system, the contaminant retardation factor is determined by both the contaminant association with solid matrix and colloidal particles and the colloidal deposition on solid matrix. The contaminant mobility is enhanced when the affinity of contaminants to mobile colloids increases. In addition, as the affinity of colloids to solid matrix decreases, the contaminant mobility increases.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 추계학술대회 논문
• /
• pp.194-197
• /
• 1996

The high-strength aluminum alloy 7075-T651 was used to observe the fatigue-crack-propagation behavior for the various stress ratios with constant amplitude loading and thus to predict the fatigue life. With a chevron notch in the specimen the fatigue-crack-propagation behavior of through crack was investigated. Crack propagation behavior of through crack in the depth direction and crack growth of weldments were experimentally studied. Base material heat affected zone and weld material were considered in the fracture of weldments. The change of crack-propagation length with respect to several parameters such as stress intensity factor range(ΔK) effective stress intensity factor range(ΔKeff)ration of effective stress intensity factor range(U) stress intensity factor of crack opening point(K op) maximum stress intensity factor(K max) and number of cycles(Nf)was determined. The crack length of through crack of weldments was 2.4mm and the remaining part was a base material. The experiment was accomplished by making the crack propagate near the base material.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.369-372
• /
• 2009

When measuring the luminous flux of a light source at the integrating sphere photometer, it can know the luminous flux to compare the standard lamp with the specimen lamp at the same location. But in case of PLS(plasma lighting system, microwave discharged lamp), that two lamps are cannot be the same location. If the reference illuminant and specimen lamp are cannot measure identical location, we should measure the variation of the luminous flux. For the outcome we can turn out a correction factor to revise and reflect it. But the better way is calibrate the specimen lamp locate the identical location of reference illuminant measured. In this thesis, we've test to find the correction factor for consider that change the measuring location. And it turns out the correction factor. From this, it presents the result to make a select for the reference illuminant which is against the illuminant type for newly produce.

• 전력전자학회논문지
• /
• 제26권4호
• /
• pp.302-305
• /
• 2021

Selection of the optimal inductance for power factor improvement of a buck AC/DC light-emitting diode (LED) driver with wide input voltage range is described in this study. The power factor change based on the slope compensation is obtained for various normalized output current (NOC) values using discrete-time domain analysis. The possibility of implementing constant slope compensation is described using power factor curves for various NOC values. NOC = 0.5 is chosen for the value of inductance with consideration for the simple implementation and reduction of inductor size. Experimental results of the inductance corresponding to NOC = 0.5 are presented.

• 한국조경학회지
• /
• 제30권4호
• /
• pp.9-18
• /
• 2002

This study investigated the influential range of landmarks and the relationship between landmarks and cognition factor so as to offer basic data to be used for the effective use and the management of landmarks. In this study, eighteen famous landmark in Seoul were selected and analyzed. The result of this study can be summarized as follows : 1) First, eighteen determining elements of cognition factors were selected via documents survey. Second, general cognition factors of landmarks were analysed using these elements through questionnaires to specialists. As a result of factor analysis, historic cultural factor, scale factor, visual form factor, locational factor and uniqueness factor were revealed. 2) According to revealed cognition factor, eighteen landmarks are categorized into four types using MDS method via questionnaire to resident in Seoul city. These four types of landmarks are: type I that are recognized by historic cultural factor; type II that are recognized by scale factor; type III that are recognized by uniqueness factor; and type IV that are recognized by visual form factor. 3) As the result of regression, the influential range of landmarks were revealed at about a 10km radius(type I : 12km type II : whole area of Seoul city≒15km, typeIII : 8.7km, typeIV : 8.5km). 4) As a result of analysing the correlation between the influential range and the cognition factor through multiple linear regression analysis, the locational factor is the main factor affecting the influential range of landmarks in every type. The uniqueness factor comes next, which affects influential range partially. 5) Except type 1, as a result of analysing the correlation between influential range and the physical heights of landmarks, a quadratic equation is revealed, showing that the influential range of landmarks over 200 meters in height shows a radical change. Landmarks can be used as reinforcement tools of legibility, effective tools for landscape management and for the improvement of a community's image. This study on the influential range of landmarks and main cognition factor can be utilized as a landmark management plan and in urban planning, such as a new town plan.

• 한국의류학회지
• /
• 제23권6호
• /
• pp.820-828
• /
• 1999

The purpose of this study was to investigate the changes of pore area and water vapour transport by the changes of moisture regain and fabric structure of wool fabrics, As specimens 4 worsted wool fabrics were used. The pore area were measured by image analysis method and dinamic vapour transport and water reisitance was determined by clothing-environment-body modelling system. The pore area was changed by the moisture regain of wool fabrics. The change of pore area was influenced by the yarn twist thread count and cover factor and the weave type. The water vapour transport was changed by the moisture regain. The change of water vapour transport was influenced by the change of pore aree which was determined by image analysis.

• International Journal of Quality Innovation
• /
• 제5권1호
• /
• pp.1-9
• /
• 2004

The nonhomogeneous poisson process (NHPP) is often used to model repairable systems that are subject to a minimal repair strategy, with negligible repair times. In this situation, the system can be characterized by its intensity function. There have been many NHPP models according to intensity functions. However, the intensity function of system in use can be changed because of repair or its aging. We consider the single change point model as the modification of the power law process. The shape parameter of its intensity function is changed before and after the change point. We detect the presence of the change point using Bayesian methodology. Some numerical results are also presented.