• 지구물리
• /
• 제8권3호
• /
• pp.123-130
• /
• 2005

It is necessary, in the light of the importance of long-term slope stability problem, to develop a simple method or tool which can figure out the possible failure zone resulted from weathering effect and other factors. The FBG sensor system is used to estimate the correlations between the temperature and the slope in Kimhae, and to find a failure zone in slopes effectively. This research is to seek for the correlation between the soil temperature distribution and the strain distribution in a active zone by analyzing the data from the in-situ measurement so that the possible failure zone should be well defined based on the correlation. For instance, the zone of high temperature fluctuation can be regarded as one of the possible sliding zone due to the weathering effect while the constant temperature depth of the ground, if exists would not be relatively affected by the weathering process.

• 자원환경지질
• /
• 제30권2호
• /
• pp.143-151
• /
• 1997

The history of the Palgongsan Fault comprises the growth-fault, the dormant and the strike-slip phases. Dissecting the Palgongsan Granite, the Palgongsan Strike-slip Fault, which is the product of the final phase, sinistrally offset about 5.5 km as shown in the dislocation of the Hasandong Formation. Faulting, sedimentation and igneous activity were inter-related in the early phases of the Palgongsan Fault. Some other faults such as the Dansan Pond Fault and the Hayang Fault have also been discovered, and their some stratigraphic implications and the ages of faulting are discussed. The anomalous development of the Jindong Formation in the study area and the related stratigraphic problems are discussed. It has been confirmed that the Konchonri Formation deposited over the Chaeyaksan Volcanic Formation in spite of the recent doubts on their such stratigraphic relation. The chronological sequence of the volcanisms of the Kyongsang Basin has been summarized.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.44-46
• /
• 2008

This paper presented the notch effect of interior permanent magnet motor(IPM) with compound variable number of pole and slot. The selection of proper pole and slot which makes characteristic and efficiency of motor is very important on motor design. The motor which has 6pole and 9slot is at base. This paper is choose the 4pole 6slot motor which has 2:3 ratio then analyzed the characteristic.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2011년도 후기공동학술대회 논문집
• /
• pp.112-113
• /
• 2011

선박으로부터 배기오염에 대한 국내의 관련 규제들이 강화되면서 관련 기술 개발이 급격하게 이뤄지고 있다. 그 중 탱커선의 화물탱크로부터 배출되는 유중기를 대기중으로 방출하지 않고 회수할 수 있는 설비 관련기술이 개발되고 있다. 회수설비 중 포함되는 스크러버는 가스 속의 부유 고액 미립자를 액을 이용하여 포집하는 장치로서, 스프레이 노즐을 통해 액을 분사하며, 일반적으로 물을 사용한다. 고효율 스크러버 설계기술 개발을 위해 스크러버용 노즐의 성능해석과 유동가시화 실험을 통한 내부유동 특성을 연구하였다.

• 한국군사과학기술학회지
• /
• 제8권4호
• /
• pp.85-90
• /
• 2005

We report the phase transition temperatures of the $PbZrO_3$ perovskite nanotubes made by sol-gel template synthesis. The lead zirconate($PbZrO{_3}$) nanotubes were prepared with a chelate sol-gel of zirconium tetrabutoxide($Zr(OBu){_4}$) and leadacetate($Pb(OAc){_2}-3H_2O$). $Whatman^(r)$ anodisc membranes, with a 200nm pore size, served as the template. After removing the template in the 6M-NaOH solution, the $PbZrO{_3}$ nanotubes so far have shown an anomalous transition temperature, $123.6^{\circ}C$ as measured by DSC with a small particle size, 15.4nm determined by X-ray analysis with the aid of Scherrer's equation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.97-99
• /
• 2002

3D Equivalent magnetic Circuit Network Method (EMCNM) is comparatively the easy way that analyzes 3D models of Electric Machine by using permeance as a distributive magnetic circuit parameter under the existing magnetic equivalent circuit method and Numerical Method. The existing 3D EMCNM could not correctly describe the shape of an analysis target when using rectangular shape element or fan shape element, so it made errors when calculating permeance. Therefore, this paper use the trapezoidal element contained rectangular element. This paper calculate the torque based on the maxwell stress tenser method when the airgap is one layer, three layers, and 5 layers, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.1075-1077
• /
• 1999

XLPE cables are being used more widely all over the world as extra-high voltage transmission lines owing to the superior characteristics compared to OF cables. In view of the worldwide trend of utilizing high stress cables, we developed the accessories for 230kV XLPE cables which have smaller insulation thickness than that of present cables. The performance of the newly developed 230kV cable and its accessories has superior inital characteristics. As a result, the improved reliability of 230kV XLPE cable system has been obtained. This paper describes the major design concept and the test results of development procedure.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.153-157
• /
• 2004

본 인구는 돌발홍수 예경보시스템의 수문학적 주요 구성요소인 한계유출량을 한강유역에 내해 산정하는 것이 주목적이다. 이를 위해 Landsat TM 영상자료로 추출된 DEM 자료로부터 미소 소유역($0.01\~56.7km^2$) 및 하천도를 추출하고, 자연하도 및 소유역 매개변수의 지역적 회귀분석을 통해 Manning의 제방월류 유량($Q_{bf}$) 및 GIUH의 단위도 첨두유량($q_{pR}$)을 계산하였다. 이러한 결과를 활용하여 한강유역 headwater 유역에 대한 1시간 단위의 한계유출량을 계산한 결과, 그 값이 $0.01\~1.29inch(0.25\~32.77mm)$의 범위를 보였으며, 상류쪽 유역이고 유역면적이 작은 소유역일수록 한계유출량이 작게 산정되었다.

• 한국약용작물학회:학술대회논문집
• /
• 한국약용작물학회 2010년도 심포지엄 및 추계학술발표회
• /
• pp.312-312
• /
• 2010

• 한국약용작물학회:학술대회논문집
• /
• 한국약용작물학회 2010년도 심포지엄 및 추계학술발표회
• /
• pp.313-314
• /
• 2010