• Archives of Pharmacal Research
• /
• v.5 no.1
• /
• pp.21-23
• /
• 1982

To develop new potent antitumor substancces with low toxicity from natural products, especially from higher fungi of Korea, the carpophores of some wild basidiomycetes were collected and the antitimor test for their polysaccharides was done. The dried carpophores were extracted with hot water, and from the extracts, crude polysaccharides were obtained by alcohol precipitation. The alcohol precipitated crude polysaccharides were partially purified by dialysis and then used as the samples for antitumor tests. Among tested, the polysaccharide of Laccaria laccata, Trametes sanguineus, Armlliariella mellea, Clitocybe in fundibuliformis, and Xeromphalina campanella respectively showed the inhibition ratio of 75%, 72%, 94% 55%, and 47% when administered i. p. once dailly for ten days at the dose level of 20mg/kg/day into the mice implanted with $10^{6}$ cells of sarcoma 180/mouse. However, those of Craterellus cornucopiodes, Daedaleopsis confrogosa, and Coriolus sp. showed almost no activities.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11A
• /
• pp.1182-1189
• /
• 2007

Frequency reuse in a cellular wireless communication environment gives rise to a phenomenon of cochannel interference. This paper introduces a power control strategy for OFDM based communication systems operating in such an environment. Among the existing power control schemes, IWF(iterative waterfilling) is known to exhibit relatively good performance. However, it requires feedback of power level and bit allocation information for each subcarrier from a receiver to its associated transmitter, which can lead to a considerable overhead, especially for the case of employing large number of subcarriers. Motivated by this, we present a simplified power control scheme with reduced overhead feedback, which allocates some nonzero identical power to the subcarriers of which channel conditions are above a certain threshold and zero power to the other ones. Computer simulations show that the proposed strategy produces a good approximation to the performance of the IWF in terms of the transmission power level while it requires less overhead feedback.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.6
• /
• pp.683-691
• /
• 2011

In order to develop technology for an equipment qualification (EQ) test, which is an important process in localizing solenoid-operated valves used in nuclear power plants, we analyzed related regulations, test procedures, conditions, equipment, and acceptance criteria. EQ regulations for the solenoid-operated valve are classified as law, guide, and standard, and are subdivided according to test specimens and contents. The EQ test is composed of functional, normal-, and accident- condition tests. The solenoid-operated valve is aged under normal and accident conditions, which are predicted in the design conditions of a nuclear power plant, and the performance of the valve is measured by a functional test. The test method and procedure analyzed in this paper might be very useful for manufacturers as well as EQ testers.

• Tuberculosis and Respiratory Diseases
• /
• v.61 no.6
• /
• pp.585-590
• /
• 2006

Pulmonary arteriovenous malformations (PAVMs) are abnormal direct communications between the pulmonary arteries and veins. PAVMs may occur as either an isolated abnormality or in association with hereditary hemorrhagic telangiectasia, also called Osler-Weber-Rendu disease. The topic of PAVM has recently been extensively reviewed, but little is known about the clinical characteristics and course of patients having a diffuse pattern of the disease. Herein, is reported a case of unilateral diffuse PAVM in an 18 year old female patient, who underwent a right pneumonectomy, under a video-assisted thoracic surgery (VATS) approach, as the diffuse small pulmonary arteriovenous malformation involved the whole right lung.

• KSBB Journal
• /
• v.21 no.3
• /
• pp.188-193
• /
• 2006

A new type of biofilter, a rotating drum biotrickling filter(RDBF), was developed and operated for the removal of styrene from industrial waste gas. The porous polyurethane foam sheet was used as a packing materials for the RDBF and a pure culture of Gram-positive bacterium Brevibacillus sp. SP1 was used as an inoculum. The reactor showed a short start-up period of 18 days, during which uniform biofilms were developed on the packing. During a steady operation at an incoming styrene concentration of $200ppm_v$ and a retention time of 0.5 min, a high and stable removal of styrene over 95% was observed. The maximum elimination capacity was estimated to be $125g/m^3{\cdot}hr$. The outstanding performance was attributed to an efficient gas-liquid mass transfer and the appropriate supply of nutrient solution to the biofilm microorganisms on the packing by the rotation of the drum.

• Korean Journal of Digital Imaging in Medicine
• /
• v.10 no.1
• /
• pp.5-6
• /
• 2008

In this study, using an experiment, in certified an error between each system of SUV (standardized uptake value) that is one of the main analyses to diagnose a tumor in PET/CT, so, it would assure reliability and help to diagnose any lesions accurately. That is, a detailed analysis progressed. as all images reconstructed every setting time, then, clinical reliability between each system was expressed numerically at MBq/mL and SUV. Therefore, this study is considered that flexibility of follow-up using diverse system was insured, and it helps to offer accurate and beneficial information for diagnosis of various fields.

• Korean Journal of Metals and Materials
• /
• v.50 no.11
• /
• pp.861-866
• /
• 2012

A dense nanostructured TiN-AlN composite was prepared from high-energy ball milled TiN-AlN mixture powders by pulsed current activated sintering (PCAS). A highly dense TiN-AlN bulk composite was obtained within 2 minutes at $1500^{\circ}C$ with the simultaneous application of 80 MPa pressure and pulsed current. The fine crystalline structure of the TiN-AlN mixture, which was obtained by high-energy milling, was effectively maintained during PCAS and resulted in the enhancement of the mechanical properties. The micro hardness and fracture toughness of TiN-AlN composite were $1780kg/mm^2$ and $5MPa.m^{1/2}$, respectively. The mechanical properties were higher than monolithic AlN or TiN.

• Korean Journal of Head & Neck Oncology
• /
• v.21 no.1
• /
• pp.3-9
• /
• 2005

Purpose: In oral tongue cancer, the degree of tumor invasion has a significant effect on the prognosis. We hypothesized that the destruction of extracelluar matrix and neovascularization are related to tumor infiltration mechanism. By studying the the tissues of early stage oral tongue cancer patients, we are intend to clarify the invasion related factors in oral tongue cancer. Material and Methods: To demonstrate the invasion process in early T-stage oral tongue cancer, the expressions of extracellular matrix destruction related molecules(MMP2, MMP9) and neovascularization related molecule(VEGF) were observed by immunohistochemical study. Also, immunohistochemical staining of CD31 was done for quantification of neovascularization. With the experiment showed above, we analyzed relationship between expression of each substances and tumor invasion depth, tumor free survival rates and cervical lymph node metastasis rate in early T-stage oral tongue cancer. Results: The expression rates of MMP2, MMP9, VEGF in 38 early oral cancer patients were 52.6%, 78.9% 52.6%, respectively. Significant correlation was found between the VEGF expression and microvessel density showed by CD31 immunohistochemical staining(p<0.001). VEGF expressions were significantly related with tumor invasion depth(p=0.002). The tumor free survival rate of those patients with VEGF-positive tumors was significantly poorer than in those with VEGF-negative tumors(p=0.019). Conclusion: This results indicate that VEGF is a useful marker for predicting the tumor invasion in patients with early tongue cancer and could be used as a beneficial factors in defining operative field and prognosis.

• The korean journal of orthodontics
• /
• v.37 no.4
• /
• pp.293-304
• /
• 2007

The purpose of this study was to estimate the fracture resistance of commercially available ceramic brackets to torsional force exerted from arch wires and to evaluate the characteristics of bracket fracture. Methods: Lingual root torque was applied to maxillary central incisor brackets with 0.022-inch slots by means of a $022\;{\times}\;028-inch$ stainless steel arch wire. A custom designed apparatus that attached to an Instron was used to test seven types of ceramic brackets (n = 15). The torque value and torque angle at fracture were measured. In order to evaluate the characteristics of failure, fracture sites and the failure patterns of brackets were examined with a Scanning Electron Microscope. Results: Crystal structure and manufacturing process of ceramic brackets had a significant effect on fracture resistance. Monocrystalline alumina (Inspire) brackets showed significantly greater resistance to torsional force than polycrystalline alumina brackets except InVu. There was no significant difference in fracture resistance during arch wire torsional force between ceramic brackets with metal slots and those without metal slots (p > 0.05). All Clarity brackets partially fractured only at the incisal slot base and the others broke at various locations. Conclusion: The fracture resistance of all the ceramic brackets during arch wire torsion appears to be adequate for clinical use.

• The korean journal of orthodontics
• /
• v.37 no.5
• /
• pp.341-350
• /
• 2007

The purpose of this study was to evaluate how the friction that occurs during the sliding movement of the archwire through esthetic brackets is differently affected by bracket materials, slot designs, and tip angulations of the archwire. Methods: Eight types of brackets with 0.018 inch slots (composite: Brillant (BR); composite with metal slot: Spirit MB (SP); ceramic: Inspire (IN), Signature (SI), Cristaline V (CR); ceramic with metal slot: Clarity (CL), Luxi II (LU); and metal bracket: Integra (IT)), and placed into groups of 20 brackets in each group, were tested in artificial saliva with 0.018 inch stainless steel wire. The wire tip angulations were given as 0, 4 and 8 degrees. Results: CR group significantly showed the lowest frictional force with all wire tip angulations of 0,4, and 8 degrees. IN significantly showed the highest frictional force (p < 0.001). BR (polyoxymethylene) had significantly less frictional force than SP (polycarbonate) (p < 0.001) and showed no significant difference between metal brackets. Friction was increased as the wire tip angulations were increased, but no notches were observed on any parts of the archwire. Conclusions: According to the results of this study, esthetic brackets are superior or similar to 55 brackets from a frictional point of view.