• The Transactions of the Korea Information Processing Society
• /
• v.6 no.1
• /
• pp.182-192
• /
• 1999

The advance of the MPEG(Moving Picture Expert Group) and DSP(Digital Signal Processing) technologies lead the energence of the information appliances which are gradually digitalized and embedded the high-speed networking function. This paper proposes a CHANCE(Cost-effective Home ATM Network for the Consumer Electronics) protocol supporting the ATM-based high-speed networking between the information appliances within the home, and designs its specific functions including the network management and signalling function. The CHANCE protocol is basically based on the tree topology, and supports the plug-and-play function by using only the header field of the ATM cells. Unlike the existing ATM Warren protocol which uses the source routed addressing scheme to control the in-home devices from the Warren controller, the CHANCE protocol can support the inter-device controls as well as the controls from the CHANCE controller by using the switch and device identifier.

• The Mathematical Education
• /
• v.61 no.1
• /
• pp.29-45
• /
• 2022

This study tried to analyze the problems by critically examining how the chance is taught in relation to the concept of chance and randomness in the Korean elementary school mathematics curriculum. To this end, the concepts of chance and randomness were first examined, and problems were presented in based on this by the literature analysis on mathematics curriculum material and textbooks for elementary school in Korea. As a result, there was a lack of experience in reasoning based on data, and randomness instruction was not performed properly. In addition, as the teaching of the sample space was omitted, contradictory materials were being used. Moreover, it was pointed out that the teaching of chance is focused on a specific grade level. For the improvement of the teaching of chance, a teaching of the probability experiment and the sample space were mainly suggested, and it was also suggested that the contents of the data area be adjusted for the composition focused on a specific grade.

• Korea journal of population studies
• /
• v.20 no.1
• /
• pp.129-159
• /
• 1997

The main purpose of this study is to describe the different life chances among various occupational groups in Chonbuk Province which has been excluded in the process of Korea's industrialization since the 1960s. More specifically, this study analyzed to what extent 6 occupational groups have the different life chances in the sub-levels such as health conditions and leisure life. According to our data analysis, it is found that the 6 occupational groups have the different life chances. That is, while those who are engaged in the higher prestigious occupation have a good life chance, those who in the lower prestigious occupation have a worse life chance. For example, among 6 occupational groups, professional-managerial who secure the higher autonomy and stability in their work have the highest life chance in the labor and health, and leisure life. Next, professional-technical, white-collar, sales-service occupants have the higher life chance after the professional-managerial. However, these 3 occupation groups are partially inconsistent in the two sectors of the life chance. Specifically, the professional-technical, despite their autonomy and stability in the work world, conceived that their work conditions are worse as well as badly influencing on their own health. On the other band, the sales-service workers group, despite their lower social status, is relatively autonomous and stable in their work environment and thus has the higher life chances. Finally, agricultural and productive workers have relatively the lower lift chances. Nevertheless, there are some clear differences among these 2 occupational groups. That is, the farmers have relatively the higher life chances in the sectors of socio-economic characteristics, and labor and health rather than productive workers. As a result, the productive workers are generally located in the lowest level of life chance. This fact is particularly attributed to the fragility of manufacturing industries in Chonbuk Province.

• Journal of the Korean Mathematical Society
• /
• v.47 no.1
• /
• pp.17-28
• /
• 2010

In this paper we deal with linear chance-constrained optimization problems, a class of problems which naturally arise in practical applications in finance, engineering, transportation and scheduling, where decisions are made in presence of uncertainty. After giving the deterministic equivalent formulation of a linear chance-constrained optimization problem we construct a conjugate dual problem to it. Then we provide for this primal-dual pair weak sufficient conditions which ensure strong duality. In this way we generalize some results recently given in the literature. We also apply the general duality scheme to a portfolio optimization problem, a fact that allows us to derive necessary and sufficient optimality conditions for it.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.477-481
• /
• 2002

Grinding which is the final finishing step in the machining processes plays an important role fur precision manufacturing because it directly affect the product quality. Since the ground surface is affected by the states of grains and voids on the grinding wheel surface, the wheel should be dressed before the machined surface deteriorates over a quality limit. This paper describes a systematic approach to decide a proper dressing chance. A fabricated eddy current sensor and CCD camera are used to measure the loading on the working wheel surface and to visualize the wheel surface states respectively. The dressing chance can be properly decided through the relation between the variation of the thresholding image of the wheel and the machined surface roughness as the variation of the eddy current sensor output is greater than the detected value previously.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1222-1225
• /
• 1993

The purpose of this paper is to construct a prediction system on the chance of rain in a local region using a fuzzy relational model. The prediction system consists of two parts. One is a prediction part on the chance of rain. The compositional law of fuzzy inference, proposed by Zadeh, is applied to predict the chance of rain. The other is a learning part of a fuzzy relational model using input-output data. A simple and fast learning algorithm is used in this part. Simulations are carried out by the actual weather data in our city and their results show the validity of prediction by the fuzzy relational approach.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.4
• /
• pp.507-517
• /
• 1995

The failure rate of an item depends on operational environment. When an item has a chance failure period and a wearout failure period in sequel, the severity of operational environment causes the increase in the slop of wearout failure rate or the increase in the magnitude of chance failure rate. For such a change of operational environment, this paper concerns the change of optimal preventive replacement time. Two preventive replacement policies, age replacement policy and periodic replacement policy with minimal repair, are considered. Investigated properties are: (a) in age replacement policy, optimal preventive replacement time increases as the chance failure rate increases and optimal preventive replacement time decreases as the slope of wearout failure rate increases, and (b) in periodic replacement policy with minimal repair, optimal preventive replacement time increases as the slope of wearout failure rate increases; however, the change of chance failure rate does not alter the optimal preventive replacement time.

• Journal of Korean Public Health Nursing
• /
• v.35 no.2
• /
• pp.268-282
• /
• 2021

Purpose: This study sought to investigate health behavior (HB) and its affecting factors based on Anderson's behavioral model in Lao People's Democratic Republic (PDR). Also, it attempted to identify the mediation of the health locus of control (HLC) between HB and the affecting factors. Methods: Secondary data from 694 people without noncommunicable diseases (NCDs) from a survey conducted by the Ewha Womans and the Laos University were used. The measurements included predisposing, enabling, and needs factors, HLC, HB (current non-smoking, low-risk drinking, physical activity, fruit and vegetable consumption, medical checkup). The mediating effect was analyzed using Baron and Kenny's method and the Sobel test. Results: Predisposing (gender, educational level, ethnic), enabling (social support, item ownership in household) and the needs factors (body mass index) were affecting HB. Internal HLC had a positive influence on HB. The stronger the others and chance HLC, the lower the HB. Chance HLC mediated the relationship between the educational level and HB. Conclusion: There is a need to recognize the importance of chance HLC as a mediator between the educational level and HB. Through this result, high-quality nursing education for the prevention of NCDs should be developed considering the impact of chance HLC.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.8
• /
• pp.101-107
• /
• 1997

In general, grinding is one of the final machining processes which determines the surface quality of machined products. Since the ground surface is affected by the states of grains and voids on the grinding wheel surface, the wheel should be dressed before the machined surface deteriorates over a quality limit This paper describes a systematic approach to decide a proper dressing chance and an optimal dressing depth for the working grinding wheel. An eddy current sensor and a laser displacement sensor are used to measure the loading on the working wheel surface and the topography of the dressed wheel surface respec- tively. The dressing chance can be properly decided through the relational locus between the amount of handing and the machined surface roughness. An optimal dressing depth to guarantee the less wheel loss and the higher wheel surface quality is decided through the analysis of the variance of topography for the dressed wheel surface, which decreases at three different rates according to the accumulated dressing depth.

• School Mathematics
• /
• v.15 no.2
• /
• pp.315-335
• /
• 2013

Probability has distinctive characteristics which are different from other areas of school mathematics. The critical change can be noticed in the domain, 'probability and statistics' of 2009 revised national curriculum for elementary school mathematics. This indicates that the concept of chance is supposed to be taught in the 5~6 grade band instead of the definition of probability which is moved to the middle school level. The purpose of this study is to seek desirable methods for teaching the concept of chance which reflect the achievement criteria and the attention point for teaching and learning of the curriculum at the point of time when textbooks haven't yet been developed. To do this, based on theoretical considerations and comparative analysis of the curricula in the longitudinal - latitudinal dimensions respectively, the validity of the latest curriculum change was confirmed and several learning activities were devised. And then two lessons were planned for applying these activities to eight fifth graders and were implemented along the plan. As a result, the relevance of the learning activities was examined and students' difficulties in learning the concept of chance with educational implications were discussed.