• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.1
• /
• pp.94-99
• /
• 2007

In this paper, a 2-dimensional edge-based matching algorithm is proposed that combines the generalized Hough transform (GHT) and the Chamfer matching to complement weakness of either method. First, the GHT is used to find approximate object positions and orientations, and then these positions and orientations are used as starling parameter values to find more accurate position and orientation using the Chamfer matching. Finally, matching accuracy is further refined by using a subpixel algorithm. The algorithm was implemented and successfully tested on a number of images containing various electronic components.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.353-356
• /
• 2007

chamfer 정합(matching)은 많은 응용분야에서 사용되온 에지(edge) 기반 정합기법으로, 변환된 모델에지와 영상에지간의 거리를 최소화하는 과정이다. 이 거리는 보통 거리변환을 이용하여 픽셀분해능으로 계산된다. 본 논문에서는 서브픽셀(subpixel) 거리계산을 위해 거리계산시 보간법을 사용하여, 정확한 chamfer 정합을 구현한, 개선된 chamfer 정합 방법을 제안한다. 또한, 보다 정밀한 정합을 위해, 최소거리를 갖는 픽셀위치의 주변영역을 이용하여 최적의 위치를 추정하지 않고, 서브픽셀로 실제 거리계산을 통해 최소 거리를 찾기 위해 Powell 의 최적화기법을 이용하였다. 실험결과는 제안된 방법의 타당성을 보여주었다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.937-940
• /
• 2010

본 연구는 fine blanking 프레스로부터 기능면으로 사용되는 100% clean cut 전단면을 얻는 fine blanking 공정에서 die roll을 최소화하기 위한 목적으로 성형 해석 및 실험적 방법을 통해 die chamfer 형상에 따라 성형되는 제품의 die roll size 변화를 검토한 것이다. fine blanking 과정을 묘사하기 위하여 deform 2D를 이용하여 성형 해석을 수행하여 die roll size를 예측하였으며, 실제 die chamfer가 다른 die insert를 제작하여 fine blanking 실험을 실시하여 die chamfer 형상에 따른 die roll size에 대한 해석 data와 실험 data를 비교 분석하여 die roll 길이 방향 size의 경향을 파악할 수 있었다. 이 연구 결과는 fine blanking 판재 성형에서 die roll을 최소화하기 위한 die chamfer 설계에 유용하게 적용될 것으로 판단된다.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.670-675
• /
• 2001

This paper is to propose image segmentation method based on chamfer algorithm. First, we get original image from CCD camera and transform it into gray image. Second, we extract maximum gray value of background and reconstruct and eliminate the background using surface fitting method and bilinear interpolation. Third, we subtract the reconstructed background from gray image to remove noises in gray image. Fourth, we transform the subtracted image into binary image using Otsu's optimal thresholding method. Fifth, we use morphological filters such as areaopen, opening, filling filter etc. to remove noises and isolated points. Sixth, we use chamfer distance or Euclidean distance to this filtered image. Finally, we use watershed algorithm and count microorganisms in image by labeling. To prove the effectiveness, we apply the proposed algorithm to one of Ammonia-oxidizing bacteria, Acinetobacter sp. It is shown that both Euclidean algorithm and chamfer algorithm show over-segmentation. But Chamfer algorithm shows less over-segmentation than Euclidean algorithm.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.1
• /
• pp.104-112
• /
• 2022

The purpose of this study is to analyze the fracture resistance of reattached tooth according to the resin materials and tooth preparation type under physiological conditions. Uncomplicated crown fracture in the oblique direction was reproduced on the extracted 64 anterior teeth. Depending on the composite resin material, reattachment was performed using a flowable resin and a packable resin. Depending on retentive forms, reattachment was performed using simple reattachment, 1.0 mm × 1.0 mm labial chamfer bevel, 1.0 mm × 1.0 mm lingual chamfer bevel and 1.0 mm × 1.0 mm circumferential bevel. A load was applied to the palatal surface of the tooth using a universal testing machine at an angle of 125 degree, which is the interincisal angle of normal children. Under the masticatory pressure condition, fracture resistance of lingual chamfer groups was 28.28 ± 7.41 MPa and 27.54 ± 4.45 MPa, which was significantly higher than those of simple reattachment groups, 17.21 ± 5.87 MPa and 20.10 ± 6.00 MPa, in both flowable and packable resin groups. When considering the lingual force similar to masticatory pressure, the fragment retention was significantly improved when the lingual chamfer was formed compared to the simple reattachment. Clinicians may consider the design of the lingual chamfer in order to improve fracture resistance to masticatory pressure during fragment reattachment.

• The KIPS Transactions:PartB
• /
• v.17B no.1
• /
• pp.37-46
• /
• 2010

In this paper we have presented a two dimensional model based tracking system using improved chamfer matching. Conventional chamfer matching could not calculate similarity well between the object and image when there is very cluttered background. Then we have improved chamfer matching to calculate similarity well even in very cluttered background with edge and corner feature points. Improved chamfer matching is used as likelihood function of particle filter which tracks the geometric object. Geometric model which uses edge and corner feature points, is a discriminant descriptor in color changes. Particle Filter is more non-linear tracking system than Kalman Filter. Then the presented method uses geometric model, particle filter and improved chamfer matching for tracking object in complex environment. In experimental result, the robustness of our system is proved by comparing other methods.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.90-96
• /
• 2014

Purpose: The purpose of this study is to see what impact the heat and press-on-metal technique has on the marginal fit of metal ceramic crown. Materials and methods: Prior to the experiment, 4 metal master models were prepared. Each model has margin of chamfer, margin of heavy chamfer, margin of shoulder with bevel and margin of shoulder (collarless). Additionally, 10 crowns were made for each margin, total of 40 crowns. Marginal discrepancy between the master model and crown was observed at ${\times}100$ microscopic magnification in two states; in coping state and upon completion of making metal ceramic crown. Data analysis was performed using paired t-test along with one-way ANOVA and Duncan multiple comparison test. Results: After analyzing mean and standard deviation of marginal discrepancy, it was confirmed that marginal discrepancies were within the clinical permitted range for all states; in coping state and upon completion of making metal ceramic crown. For the chamfer group, a significant increase in marginal discrepancy upon completion of making metal ceramic crown was observed compared to the heavy chamfer group. Also, a marginal discrepancy of porcelain margin in shoulder group was significantly less than the marginal discrepancy of metal margin in chamfer and shoulder group. Conclusion: From the test result, one can conclude that marginal fit of metal ceramic crown built with heat and press-on-metal technique is not significantly different from marginal fit of metal ceramic crown built with traditional technique. And along with efficiency of this system, heat and press-on-metal technique is considered in clinic.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.11
• /
• pp.779-786
• /
• 2019

Effects of chamfered perforated plate on pressure loss characteristics were studied with CFD analysis. Both inlet chamfer angle and outlet chamfer angle were considered. Perforated patterns were compared by pressure loss coefficient in certain porosity and Reynolds number. Reynolds number effects were studied for several chamfer angles and plate thickness. As the inlet chamfer angle was increased, the pressure loss coefficient was decreased until the certain angle and reversed to increase. In the outlet chamfered shape cases, the pressure loss coefficient was increased with chamfer angle. Effects of pattern shapes and Reynolds number on pressure loss characteristics were negligible with different chamfer angles and thickness studied in this paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.565-570
• /
• 2011

There is always die roll in fine blanking parts which is able to have 100% clean shear surface. In this paper the change of die roll size was studied by fine blanking tryout in order to minimize die roll size. Various die inserts with different die chamfer were machined, fine blanking die was manufactured and tested. The die roll sizes of fine blanking samples were measured and the tendency of thickness directional die roll size was comprehended. This result will be used on the design of die chamfer in order to minimize thickness directional die roll size of fine blanking parts

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.92-94
• /
• 2008

In this paper we describe an approach for template based detection and tracking of objects by chamfer matching in real time video. Detecting and tracking of any objects is the key problem in computer vision. In our case we try for hand and head of human for detection and tracking by chamfer matching technique. Matching involves correlating the templates with the distance transformed scene and determining the locations where the mismatch is below a certain user defined threshold.