• Bulletin of the Korean Chemical Society
• /
• 제19권9호
• /
• pp.962-967
• /
• 1998

Block copolymers consisting of poly(rbenzyl L-glutamate) (PBLG) as the hydrophobic part and poly(ethylene oxide) (PEO) as the hydrophilic part were synthesized and characterized. Polymeric micelles of the block copolymers (abbreviated GEG) were prepared by a dialysis method. The GEG block copolymers were associated in water to form polymeric micelles, and the critical micelle concentration (CMC) values of the block copolymers decreased with increasing PBLG chain length in the block copolymers. Transmission electron microscopy (TEM) observations revealed polymeric micelles of spherical shapes. From dynamic light scattering (DLS) study, sizes of polymeric micelles of GEG-1, GEG-2, and GEG-3 copolymer were 106.5±59.2 nm, 79.4±46.0 nm, and 37.9±13.3 nm, respectively. The drug loading contents of GEG-1, GEG-2 and GEG-3 polymeric micelles were 12.6, 11.9, and 11.0 wt %, respectively. These results indicated that the drugloading contents were dependent on PBLG chain length in the copolymer; the longer the PBLG chain length, the more the drug-loading contents. Release of norfloxacin (NFX) from the nanoparticles was slower in higher loading contents of NFX than in lower loading contents due to the hydrophobic interaction between PBLG core and NFX.

• 한국의류학회지
• /
• 제24권7호
• /
• pp.1065-1072
• /
• 2000

The molecular areas and the interfacial tension behavior of ten nonionic surfactants, i.e., Span 20 and Tween 20, 40, 60. 80, 21, 61, 81, 65, & 85 are tested to assay their effects on the wetting and liquid retention properties of hydrophilic and hydrophobic fibrous materials. The molecular areas at water/air interface are derived from Gibbs’adsorption equations. The following conclusions are drawn from the results: 1) Span 20 is efficient in lowering the interfacial tension and effective in adsorption at the water/air interface, resulting in the low interfacial tension at critical micelle concentration (${\gamma}$$_{CMC}$) and a small molecular area($\omega$), 2) when the hydrophiles of the surfactants are constant, $\omega$’s increase as hydrophobe carbon numbers of the surfactants increase, 3) when the hydrophobes are constant, ${\gamma}$$_{CMC}$’s and $\omega$’s increase as the hydrophile ethylene oxide units increase, indicating effectiveness and efficiency is parallel in this case, 4) the ethylene oxide unit length as a hydrophile has greater influence on u than the hydrophobe chain length.han the hydrophobe chain length.gth.

• Bulletin of the Korean Chemical Society
• /
• 제23권5호
• /
• pp.683-687
• /
• 2002

We have investigated the effect of the number of ethylene oxide (EO) units inside poly(ethylene glycol)dimethacrylate (PEGDMA) on the ionic conductivity of its gelled polymer electrolyte, whose content ranges from 50 to 80 wt%. PEGDMA gelled polym er electrolytes, a crosslinked structure, were prepared using simple photo-induced radical polymerization by ultraviolet light. The effect of the number of EO on the ionic conductivity was clearly shown in samples of lower liquid electrolyte content. We have concluded that the ionic conductivity increased in proportion to both the number of EO units and the plasticizer content. We have also studied the electrochemical properties of 13PEGDMA (number of EO units is 13) gelled polymer electrolyte.

• 폴리머
• /
• 제34권4호
• /
• pp.289-293
• /
• 2010

비스트리에톡시시릴에탄(bis(triethoxy silyl) ethane)을 전구체로 도데실 트리메틸암모늄 브로마이드(dodecyl trimethyl ammonium bromide), 세틸 트리메틸암모늄 브로마이드(cetyl trimethyl ammonium bromide), 그리고 옥타데실 트리메틸암모늄 브로마이드(octadecyl trimethyl ammonium bromide)를 구조유도체로 사용하여 주기적인 메조포러스 유기실리카(periodic mesoporous organosilicas)(PMO)를 합성하였다. 합성된 PMO의 경우 구조유도 체로서 사용한 계면활성제의 알킬기가 증가할수록 PMO의 표면적과 기공부피가 감소하였으나 기공의 직경에는 영향 이 없었다. 그리고 합성된 PMO에 폴리에틸렌을 삽입한 결과 사용한 구조유도체의 알킬기의 크기에 따라서 폴리에 틸렌의 삽입과정에 많은 영향이 있었으나, 폴리(에틸렌 옥사이드)의 경우 합성된 PMO의 특성에 영향이 거의 없음을 XRD와 DSC로 확인하였다. 또한, 고분자의 열안정성을 확인한 결과 PMO에 삽입된 고분자의 열분해 온도가 증가함 을 알 수 있었다.

• Fibers and Polymers
• /
• 제4권1호
• /
• pp.32-37
• /
• 2003

The nonionic surfactant properties of ethoxylated azo dyes, such ai cloud point and surface tension have been investigated. The synthesized ethoxylated azo dyes could dye polyester fabric without any special pre-treatment. When the average number of ethylene oxide (EO) in the ethoxylated azo dye reached 6, its fixation could exceed $90^{\circ}C$ from the thermosol dyeing process. The average degree of condensation of ethylene glycol in the chain was interrelated with the dyeing results and did not affect on the maximum absorption wavelength (λmax) of the polyoxyethylene dye. When the average length of polyoxyethylene chain decreased, the molecular weight of dyes became smaller and the fixation of dyes was improved.

• Bulletin of the Korean Chemical Society
• /
• 제25권8호
• /
• pp.1182-1188
• /
• 2004

Polydisperse oligo(PO-b-EO) allyl ether siloxane surfactants were synthesized by the hydrosilylation reaction of OMTS with Allyl-oligo(PO-b-EO) series. The surface tension of siloxane surfactants increased with increasing the EO chain length while it decreased with increasing the PO ratio. However, the sedimentation time of the aqueous solution showed opposite trend to the surface tension data. Both the surface tension and sedimentation time of the aqueous solution containing inorganic electrolyte gradually decreased as the content of inorganic electrolyte increased because of the surface arrangement of surfactant molecules. However, they increased with an increase of pH values due to the hydrolysis of the siloxane backbone. The $C_p$ values tended to increase with the increase in the EO chain length and decrease of the PO ratio. It seems that intermolecular interaction between PO/EO block copolymer and water affects the variation of transition temperature.

• 한국응용과학기술학회지
• /
• 제15권2호
• /
• pp.83-92
• /
• 1998

${\alpha}-sulfonated$ fatty acid polyethylene glycol esters with polyethylene oxide(addition, 3, 5, 10mol) were synthesized through esterification of ${\alpha}-sulfonated$ fatty acid methyl esters with alkyl chain length $C_{12}{\sim}C_{18}$. Their compounds were separated with column chromatography, and confirmed by TLC. Quantitative analysis of all the sulfonates were performed according to JIS K-3362 method, and ethylene oxide unit number were determined by ISO 2270 method. Structural properties of ${\alpha}-sulfonated$ fatty acid methyl esters and their derivatives were also identified from IR, and $^1H$ NMR spectra.

• Bulletin of the Korean Chemical Society
• /
• 제21권6호
• /
• pp.623-627
• /
• 2000

Aggregation of hydrophobically end-capped poly(ethylene oxide)s: HEURs, denoted as $C_8$$EO_{380}$$C_8$, $C_12$$CO_{600}$$C_{12}$, and $C_{18}$$EO_{860}$$C_{18}$,are described using static fluorescence, dynamic light scattering, and atomic force microscope (AFM) techniques. The CAC (critical aggregation concentration) was determined by com-paring two fluorescent peaks which were influenced by the polarity of the probe dye molecules, pyrene. The aggregation occurs in concentrations higher than 10 g/L of $C_8$$EO_{380}$$C_8$ and the CAC decreases by increasing the side chain length. The dynamic light scattering experiment shows fast mode and slow mode decays, and both are diffusive. The fast mode does not depend on the concentration, but the slow mode shows concentration dependence influenced by the formation of an aggregated structure. The hydrophobic end groups effect more dominantly than the main chains for the formation of HEUR micelles. By increasing the concentration, the HEUR micelles change their structure from spheres to rodlike micelles, and finally make fused structures, which were visualized with atomic force microscopy.

• 전기화학회지
• /
• 제10권3호
• /
• pp.213-218
• /
• 2007

리튬/유황 전지에 적합한 전해질을 조사하기 위하여, 여러 종류의 글라임(glyme)계 가소제를 넣은 폴리비닐리덴플로라이드(poly(vinylidene fluoride):PVdF) 겔 고분자 전해질을 제조하여 전기화학적 특성을 실험하였다. 가소제는 에틸렌옥사이드(ethylene oxide; EO) 구조를 가지는 glyme계 유기용매 중에서, EO의 체인 길이가 다른 트리글라임(triglyme), 테트라글라임(tetraglyme), 폴리글라임(polyglyme (Mn=250, 500))의 네 종류를 사용하였다. 가소제 내의 EO의 체인 길이가 길어질수록 PVdF 겔 고분자 전해질의 이온전도도는 감소하였다. PVdF 겔 고분자 전해질의 가소제로 triglyme을 사용한 경우의 이온전도도가 $5.38{\times}10^{-4}\;S/cm$로 가장 높았으며, polyglyme(Mn=500)를 사용한 경우에는 $2.80{\times}10^{-4}\;S/cm$으로 가장 낮았다. 그러나 계면저항은 tetraglyme을 사용한 경우에 가장 낮게 나타났으며, 이 전해질을 리튬/유황 전지에 적용하였을 때 1232 mAh/g-S(이론용량의 70%)의 높은 초기 방전 용량을 나타내었다.

• Korean Chemical Engineering Research
• /
• 제46권2호
• /
• pp.330-339
• /
• 2008

본 연구에서는 비이온 계면활성제, 보조계면활성제 등의 첨가제가 AOT 계면활성제 시스템의 water-in-oil(W/O) 마이크로에멀젼을 이용한 AgCl 나노입자 제조에 미치는 영향에 관하여 살펴보았다. AOT 계면활성제, isooctane, 무기염 수용액으로 이루어진 삼성분 시스템에 NP 계열 비이온 계면활성제를 첨가한 결과, 단일상으로 존재하는 W/O 마이크로에멀젼 영역은 증가하였으며, 일반적으로 첨가한 비이온 계면활성제의 친수성이 증가할수록 단일상의 영역은 증가하였다. 또한 첨가한 비이온 계면활성제는 마이셀의 계면을 보다 유연하게 함으로써 생성된 입자의 크기는 증가하고 분포도는 넓어졌다. 한편 보조계면활성제로 알코올을 첨가하면서 상평형 실험을 수행한 결과, 알코올의 사슬 길이가 증가하거나 첨가량이 증가할수록 단일상으로 존재하는 W/O 마이크로에멀젼이 보다 좁은 영역에서 형성되었다. 상평형 실험결과에 의하여 결정된 단일상의 W/O 마이크로에멀젼 영역 내에 해당하는 조건에서 보조계면활성제의 사슬 길이와 첨가량을 변화시키면서 AgCl 나노입자 제조실험을 수행한 결과, 생성된 AgCl 입자의 특성은 보조계면활성제 첨가에 따른 마이크로에멀젼의 radius of spontaneous curvature와 필름 rigidity의 변화에 의하여 결정됨을 알 수 있었다.