Park, Byung-Kwon;Choi, Hyung-Rim;Kim, Jae-Joong;Lee, Jae-Kee;Kim, Chae-Soo;Lee, Kang-Bae;Park, Young-Jae;Park, Min-Seon
Journal of the Korea Institute of Information and Communication Engineering
/
v.18
no.5
/
pp.1207-1214
/
2014
Recently it has become easier to figure out cargo positional information by using GPS(Global Positioning System) and wireless communication technology. The acceleration of globalization in the shipping logistics is ever more increasing the need to provide visibility, traceability and real time informations of entry, departure of vessel including cargo and status of logistic vehicle entry into each logistic base. Providing such positional information to logistics party by using wireless communication technology can bring effective operation of supply chain and reduction in logistics costs. In the previous paper, I suggested a global location tracking system based on GPS data in global shipping logistics by means of software using GPS data. However, the previous system had a problem of being inadequate to figure out a real time location movement information and was unsatisfactory on quickly searching and checking the location of global logistics hubs according to the longitude and latitude coordinates. Hence, in this paper, I suggest a real-time location tracking system that provided real-time location of the container cargos and logistics hubs can be searched quickly according to the GPS coordinates in global shipping logistics.
The Importance of SEP (Standard Essential Patents) Procurement Operation is on the side of Governmental and Public both to accelerate the national trade negotiation competitiveness. To operate cooperative system of SEP creation and management, Government should monitor the effect and performance periodically to public sectors. and To achieve the support objectives, it should establish the virtuous circle infrastructure between R&D and economic performance on SEP. This can make the SEP enhancement to pursue the international competitiveness on Intellectual Property Rights. Especially the specific support approach to each phase of the SEP declaration matrix is essential to consolidate the possibility of SEP creation and acquisition. In this study, the concepts of SEP to accelerate the national trade negotiation competitiveness and the prior research were verified through the investigation of market trend and current state of affair analysis. Through the analysis of international and domestic situation of SEP procurement and management, We have found the results as follows. First of all, the leading conglomerates and the Government should focus on the secondary and tertiary industries to create and acquire SEPs to accomplish the effectiveness of selection and concentration. In second, the SMEs and Univ. Labs should focus on the quaternary sector of the economy to retain the competitiveness of speed and challenge on SEP related. From this study, the appropriateness of the tailored-support management model should be institutionalized, and the results implied an research in order to examine the suitability among the current SEP to enhance the competitiveness of national trade research issues.
Equilibrium data of the mixture is essential in the design and operation of separation equipment such as distillation or extraction in chemical processes. These equilibrium data can be obtained through experiments or by calculations using the known binary parameters and the thermodynamic models. Generally, to obtain these parameters, phase equilibrium experimental data such as gas-liquid and liquid-liquid are used. In this study, the excess enthalpy of the mixture was measured using the flow type microcalorimeter which is a simpler method than phase equilibria experiments, and the parameters of various theories were obtained by using this data. In order to investigate the relationship between carbon chain length, enthalpy and binary parameters in the alkane system, excess enthalpies for the n-hexane + alkane (n-pentane, n-heptane, n-octane and n-dodecane) were measured at 298.15 K and the banary interaction parameters of Wilson, NRTL, and UNIQUAC were obtained from the experimental data. In addition, we wanted to obtain basic information on the interaction and association phenomena of the system including electrolyte applicable to various fields by using the excess enthalpy experimental data and the existing theory. First, we investigated the excess enthalpy for the NaOH / Water / Ethanol system as a basic experiment and examined the applicability using the electrolyte-NRTL (eNRTL) theory.
Journal of Korean Society of Industrial and Systems Engineering
/
v.39
no.4
/
pp.106-116
/
2016
MTO (Make to Order) is a manufacturing process in which manufacturing starts only after a customer's order is received. Manufacturing after receiving customer's orders means to start a pull-type supply chain operation because manufacturing is performed when demand is confirmed, i.e. being pulled by demand (The opposite business model is to manufacture products for stock MTS (Make to Stock), which is push-type production). There are also BTO (Build to Order) and ATO (Assemble To Order) in which assembly starts according to demand. Lean manufacturing by MTO is very efficient system. Nevertheless, the process industry, generally, which has a high fixed cost burden due to large-scale investment is suitable for mass production of small pieces or 'mass customization' defined recently. The process industry produces large quantities at one time because of the lack of manufacturing flexibility due to long time for model change or job change, and high loss during line-down (shutdown). As a result, it has a lot of inventory and costs are increased. In order to reduce the cost due to the characteristics of the process industry, which has a high fixed cost per hour, it operates a stock production system in which it is made and sold regardless of the order of the customer. Therefore, in a business environment where the external environment changes greatly, the inventory is not sold and it becomes obsolete. As a result, the company's costs increase, profits fall, and it make more difficult to survive in the competition. Based on the customer's order, we have built a new method for order system to meet the characteristics of the process industry by producing it as a high-profitable model. The design elements are designed by deriving the functions to satisfy the Y by collecting the internal and external VOC (voice of customer), and the design elements are verified through the conversion function. And the Y is satisfied through the pilot test verified and supplemented. By operating this make to order system, we have reduced bad inventories, lowered costs, and improved lead time in terms of delivery competitiveness. Make to order system in the process industry is effective for the display glass industry, for example, B and C groups which are non-flagship models, have confirmed that the line is down when there is no order, and A group which is flagship model, have confirmed stock production when there is no order.
Cheon, Hyo Cheol;Kim, Jae Hyoo;Lee, Jung Kil;Kim, Tae Sun;Jung, Shin;Kim, Soo Han;Kang, Sam Suk;Lee, Je Hyuk
Journal of Korean Neurosurgical Society
/
v.30
no.8
/
pp.992-997
/
2001
Objectives : Essential hyperhidrosis is a common condition characterized by excessive body sweating. Excessive sweating beyond what is necessary to maintain normal body temperature need not be considered pathological unless it interferes with one's occupation and/or life-style. The existing non-operative therapeutic options seldom give sufficient relief or show a transient effect. In this regard, the thoracic sympathectomy may provide a definitive cure. In the past, surgical procedures were highly invasive and caused significant morbidity, but the minimally invasive thoracoscopic procedure provided detailed visualization of sympathetic ganglia and is associated with minimally postoperative morbidity. Nowadays, thoracoscopic transthoracic sympathectomy is accepted as the treatment of choice for essential hyperhidrosis. In palmar hyperhidrosis, however, the level of sympathetic chain to be blocked has been somewhat obscure. It is assumed that the incidence of compensatory hyperhidrosis may closely related to the extent of thoracic sympathectomy. Material & Methods : To compare the results of posterior midline approach with endoscopic sympathectomy, and the results of T2 with T2, 3 sympathectomy or sympathicotomy, we retrospectively studied 62 patients treated for palmar hyperhidrosis between September 1993 and May 2000. We reviewed medical records and recently interviewed the patients by telephone calls. Results : The treatment effect of T2 sympathectomy is no different from T2, 3 sympathectomy. But, the incidence of compensatory hyperhidrosis is less in the T2 sympathectomy group than the T2, 3 sympathectomy group. Conclusion : Thoracoscopic sympathectomy is considered a simple, safe, and effective method for treating palmar hyperhidrosis, with a shorter operation time, fewer hospital days, and a better cosmetic result, as compared with the open approaches. However, sympathicotomy seems to provide the advantages of a limited extent of denervation and the resultant decrease of compensatory hyperhidrosis compared to sympathectomy.
Journal of the Korea Academia-Industrial cooperation Society
/
v.19
no.3
/
pp.1-7
/
2018
The IoT environment provides an infinite variety of services using many different devices and networks. The development of the IoT environment is directly proportional to the level of security that can be provided. In some ways, lightweight cryptography is suitable for IoT environments, because it provides security, higher throughput, low power consumption and compactness. However, it has the limitation that it must form a new cryptosystem and be used within a limited resource range. Therefore, it is not the best solution for the IoT environment that requires diversification. Therefore, in order to overcome these disadvantages, this paper proposes a method suitable for the IoT environment, while using the existing block cipher algorithm, viz. the lightweight cipher algorithm, and keeping the existing system (viz. the sensing part and the server) almost unchanged. The proposed BCL architecture can perform encryption for various sensor devices in existing wire/wireless USNs (using) lightweight encryption. The proposed BCL architecture includes a pre/post-processing part in the existing block cipher algorithm, which allows various scattered devices to operate in a daisy chain network environment. This characteristic is optimal for the information security of distributed sensor systems and does not affect the neighboring network environment, even if hacking and cracking occur. Therefore, the BCL architecture proposed in the IoT environment can provide an optimal solution for the diversified IoT environment, because the existing block cryptographic algorithm, viz. the lightweight cryptographic algorithm, can be used.
Chung, Kyu Yeon;Shin, Sang Wook;Choi, Bong Soo;Kim, Chul Hong;Kim, Kyung Hoon;Kim, Hae Kyu
The Korean Journal of Pain
/
v.21
no.3
/
pp.179-186
/
2008
Background: The adrenergic nervous system in the spinal cord contributes to the development of neuropathic pain after nerve injury. Brain derived neurotrophic factor may facilitate the sympathetic change in the spinal cord and influence the state of neuropathic pain. We probed the effect of chronic repetitive administration of systemic 4-methylcatechol, which is known to be a neurotrophic factor inducer, in a spinal nerve ligation model. Methods: We made the rat neuropathic pain model by the ligation of the L5 spinal nerve. Intraperitoneal 4-methylcatechol ($10{\mu}g/kg$) or the same volume of saline wasadministrated twice daily just after the operation for 7 days. The tactile allodynia was measured by using von Frey filaments and its change was followed up from 3 days after SNL. The lumbosacral enlargement of the spinal cord was taken out and the mRNA contents of the ${\alpha}_2-adrenoceptor$ subtypes were measured by real time polymerase chain reaction and this was then compared with the control groups. The antiallodynic effect of intrathecal clonidine (3, 10, $30{\mu}g$) was evaluated and compared in the 4-methylcatechol treated rats and the control rats. Results: The expression of the ${\alpha}_{2A}$ and ${\alpha}_{2C}$ adrenoceptor subtypes did not change after 4-methylcatechol treatment. Intrathecal clonidine showed an earlier and better effect at the highest dose ($30{\mu}g$ intrathecal), but not with any other doses. Conclusions: Chronic intraperitoneal administration of 4-methylcatechol may improve the effect of intrathecal clonidine, but we could not prove the increase of ${\alpha}_{2A}$ and ${\alpha}_{2C}$ adrenoceptors in the spinal cord of 4-methylcatechol treated rats.
Proceedings of the Korean Society for Agricultural Machinery Conference
/
2003.07a
/
pp.309-316
/
2003
Generally, sesame are dried on the field after being harvested in Korea. Since harvesting season is rainy autumn and sesame drying is mainly affected sun and natural wind, it is difficult to dry sesame in time. Moreover, sesame threshing by hand is very laborious work. Therefore, tractor mounted sesame thresher which threshes sesame bundles fed in upside down and conveyed along threshing bar was developed to mechanize sesame threshing and to reduce labor cost in this research. the thresher was equipped with a threshing bar which beats sesame bundles and a three layer sieve which screens sesame. The results are summarized as follows ; 1 The sesame thresher was consisted of a hitting-stick, a feeding chain conveyor, a threshing bar, conveyor belt, and the three-layer shaking sieve. 2. In threshing test, prototype thresher showed maximum threshing ratio 98.5%, 98.7% at 14, 17 cpm beating rate respectively. 3. In screening test, prototype sieve showed maximum threshing ratio 97.2% at 12$^{\circ}$ of inclined angle and 220 cpm of sieve vibrating rate. 4. Prototype showed 98.7% of threshing ratio, 1.3% of threshing loss, 97.0% of screening ratio, 0.7% of screening loss on the rest condition of 15 sesame bundles/min of feeding rate, 14 cpm of beating rate, 220 cpm of sieve vibrating rate. 5. The working performance of prototype was 0.5hr/10a. It was 9.6 times more efficient than manual work. And, operation cost of prototype was saved by 45.9% compared to manual work.
Firms that have adopted internet technology have been confused by distorted market signals. It is natural to look at marketplace outcomes for guidance, when confronted with a new business phenomenon. However, market signals can be unreliable in the early states of any important new information technology. New technologies trigger rampant experimentation, and the experimentation is often unsustainable. As a result, market behavior is distorted and must be interpreted cautiously. In Chapter 1, we review a concept of business model and roles of strategies in a business model. In Chapter 2, we discuss a strategic auditing method for analyzing market/channel positioning, product/service positioning, value chain/value network positioning and external environmental factors. In chapter 3, we introduces major frameworks for understanding factors forming strategies. The strategic grid model categorizes four quadrants depending on the level of impacts of information technology on operation and strategy. The strategic alignment model presents a new method of assessing an alignment of information technology and business throughout all elements of a business model. In this research, we review the concept of a business model. This research introduces factors that shape strategies and new frameworks for understanding these factors. The research objective of this manuscript is to present a guidance for firms how to use information technology for attaining sustainable competitive advantages.
Kim, Minjung;Park, Moonseo;Lee, Hyun-soo;Lee, Jeonghoon;Lee, Kwang-Pyo
Korean Journal of Construction Engineering and Management
/
v.16
no.5
/
pp.54-64
/
2015
The modular construction has several advantages such as high quality of product, safe work condition and short construction duration. The manufacturing planning of modular construction should consider time frame of manufacturing, transport and erection process with limited resources (e.g., modular units, transporter and workers). The manufacturing planning of multi modular construction project manages the modular construction's characteristics and diversity of projects, as a type of modular unit, modular unit quantities, and date for delivery. However, current modular manufacturing planning techniques are weak in dealing with resource interactions and each project requirement in multi modular construction project environments. Inefficient allocation of resources during multi modular construction project may cause delays and cost overruns to construction operation. In this circumstance, this research suggest a manufacturing planning model for schedule optimization of multi project of modular construction, using genetic algorithm as one of the powerful method for schedule optimization with multiple constrained resources. Comparing to the result of the existed schedule of case study, setting optimized scheduling for multi project decrease the total factory producing schedule. By using proposed optimization tool, efficient allocation of resource and saving project time is expected.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.