• 한국육종학회지
• /
• 제40권3호
• /
• pp.286-290
• /
• 2008

본 연구에서 분자육종을 위한 신속 DNA추출법을 개발하고자, 2% CTAB 추출법을 시스템적으로 개량한 Modified CTAB법에 대한 결과를 요약하면 아래와 같다. 1. DNA 추출용 샘플마쇄는 Voltex mixer, 3개 텅스텐 구슬 및 96 deep well block을 이용하였으며, 5분 이내에 96개 샘플을 분쇄할 수 있었다. 2. Modified CTAB DNA 추출법은 1.5 ml E-tube 대신에 1.2 ml 8연식 tube를 사용하였으며 DNA 추출, PCR작업 및 전기영동까지 일련의 작업이 8채널 멀티피펫을 이용할 수 있는 시스템적으로 개선하였다. 3. Modified CTAB법은 어린잎 뿐 만 아니라 이앙 후 30일째 채취한 잎에서도 DNA 추출이 가능하기 때문에 기존의 육종포장에 재식된 재료를 활용할 수 있는 장점이 있다.

• The Plant Pathology Journal
• /
• 제26권3호
• /
• pp.289-292
• /
• 2010

This study used a modified cetyltrimethylammonium bromide (CTAB) method to efficiently extract DNA from the plant pathogenic fungus Cercospora sojina. Total DNA yield obtained by this method was approximately 1 mg/g of mycelia (fresh weight), and the mean ratio of A260/A280 and A260/A230 were 2.04 and 2.1, respectively. The results of random amplified polymorphic DNA (RAPD) analysis, digestion with restriction enzymes, and Southern hybridization indicated that polysaccharides were effectively removed by this method, and the resulting DNA was sufficient for use in subsequent molecular analysis.

• Macromolecular Research
• /
• 제13권6호
• /
• pp.499-505
• /
• 2005

Ordered mesoporous materials with a hydrothermally-stable, protozeolitic framework were prepared by exploring the direct conversion of inorganic species based on co-surfactant templating systems. To confer hydrothermal stability on the mesoporous aterials, the organic-inorganic hybrids were heat-treated in strongly basic media. Co-surfactant templating systems of cetyltrimethylammonium bromide [$C_{16}H_{13}(CH_{3})_{3}$NBr, CTAB] with 1,3,5-trim­ethylbenzene (TMB) or a nonionic block copolymer of poly(ethylene oxide )-b-poly(propylene oxide )-b-poly(ethyl­ene oxide) ($EO_{20}PO_{70}EO_{20}$) were employed to improve the hydrothermal stability of the organic-inorganic self-assembly during the solid rearrangement process of the inorganic species. The mesoscopic ordering of the pore structure and geometry was identified by X-ray diffraction, small angle neutron scattering and electron microscopy.

• Bulletin of the Korean Chemical Society
• /
• 제29권5호
• /
• pp.979-984
• /
• 2008

In this study, 8 solutes (aniline, caffeine, p-cresol, ethyl benzene, methylparaben, phenol, pyridine, and toluene) have been tested in terms of linear solvation energy relationships (LSER). Several micellar liquid chromatography (MLC) systems using cationic surfactant cetyltrimethylammonium bromide (CTAB) and a mixture of water with (methanol, n-propanol, and n-butanol) modifiers were characterized using the LSER solvation parameter model. The effects of the surfactant and modifier concentration on the retention in MLC were discussed. LSER model had demonstrated high potential to predict retention factors with high squared correlation coefficients ($r^2$ > 0.99). A comparison of predicted and experimental retention factors suggests that LSER formalism is able to reproduce adequately the experimental retention factors of the solutes studied in the different experimental conditions investigated. This model is a helpful tool to understand the solute-surfactant interactions and evaluate the retention characteristic of micellar liquid chromatography.

• 전기화학회지
• /
• 제14권1호
• /
• pp.22-26
• /
• 2011

Polypyrrole (Ppy) nanowire has been electrochemically synthesized via vertically oriented mesoporous silica template. The mesoporous template is also electrochemically deposited on indium tin oxide coated (ITO) glass from tetraethyl orthosilicate (TEOS) and cetyltrimethylammonium bromide (CTAB) surfactant. The highly ordered silica template is demonstrated to be 100~120nm thick with the pores of 4~5 nm diameter by scanning electron microscope (SEM) and transmission electron microscope (TEM). Ppy is formed to fill pores of the silica template from pyrrole solution by electrochemical oxidation. The Ppy in Ppy/silica/ITO composite was found to exhibit reversible electrochemical activity, as characterized by cyclic voltammetry (CV).

• Carbon letters
• /
• 제27권
• /
• pp.12-17
• /
• 2018

We fabricated a Li-S battery with post-treated carbon nanotube (CNT) films which offered better support for sulfur, and investigated the effect of the surface properties and pore structure of the post-treated CNT films on Li-S battery performance. Post-treatments, i.e., acid treatment, unzip process and cetyltrimethylammonium bromide (CTAB) treatment, effectively modified the surface properties and pore structure of the CNT film. The modified pore structure impacted the ability of the CNT films to accommodate the catholyte, resulting in an increase in initial discharge capacity.

• Korean Chemical Engineering Research
• /
• 제61권4호
• /
• pp.570-575
• /
• 2023

Targeted anticancer drug delivery systems are needed to enhance therapeutic efficacy by selectively delivering drugs to tumor cells while minimizing off-target effects, improving treatment outcomes and reducing toxicity. In this study, a silica-based nanocarrier capable of targeting drug delivery to cancer cells was developed. First, silica nanoparticles were synthesized by the Stöber method using the surfactant cetyltrimethylammonium bromide (CTAB). Increasing the ratio of EtOH in the solvent produced uniformly spherical silica nanoparticles. Washing the nanoparticles removed unreacted residues, resulting in a non-toxic carrier for drug delivery in cells. Upon surface modification, the pH-responsive polymer, polyethyleneimine (PEI) exhibited slow doxorubicin release at pH 7.4 and accelerated release at pH 5.5. By exploiting this feature, we developed a system capable of targeted drug release in the acidic tumor microenvironment.

• 공업화학
• /
• 제27권3호
• /
• pp.307-312
• /
• 2016

$PbMoO_4$를 계면활성제를 이용하여 수열합성법으로 합성하였고, XRD, Raman, TEM, PL, BET 및 DRS 등에 의해 특성 분석을 하였다. 이들을 사용하여 자외선 조사 하에서 Rhodamine B의 광분해 반응에서의 활성을 조사하였다. XRD 및 Raman의 분석 결과로부터 계면활성제를 이용한 손쉬운 수열합성에 의해 잘 결정화된 $PbMoO_4$ 구조를 가진 촉매들이 합성되었으며 52에서 69 nm의 크기를 나타내었다. cetyltrimethylammonium bromide (CTAB)를 계면활성제로 사용하여 합성된 $PbMoO_4$는 P-25와 순수한 $PbMoO_4$ 보다 높은 광촉매 활성을 나타내었다. pH 9에서 합성된 $PbMoO_4$ 촉매가 가장 높은 활성을 나타내었다. 모든 촉매들은 540 nm 부근에서 강하고 넓은 PL 흡수밴드가 나타났으며, 이 피크의 세기가 커질수록 Rhodamine B의 광분해 활성이 증가하는 것으로 나타났다.

• 자원리싸이클링
• /
• 제12권1호
• /
• pp.48-54
• /
• 2003

연간 250,000 톤 정도 생산되는 패각을 이용하여 악취제거기능을 갖는 폴리에틸렌 필름을 제조하기 위해, 패각 표면의 탄산이온을 바탕으로 양이온 또는 양이온성 계면활성제의 이온교환에 의한 표면흡착 및 이에 따른 표면 극성 변화를 통해서 악취제거능을 부여하였다. 패각 표면의 개질은 앙이온성 계면활성제로서 DTAB(n-dodecyltrimethylammonium bromide), CTAB(n-cetyltrimethy-lammonium bromide), 그리고 DHAB(n-dihexadecyldimethylammonium bromide)를 사용하였다. 또한 앙이온의 금속으로는 $Ce^{3+}$ , $Mg^{2+}$ , $Al^{3+}$ 를 이용하여 계면활성제의 이온교환방법으로 표면을 개질하였다. 표면 개질된 패각 분말을 이용하여 LDPE라 패각 기준 20 wt% 마스터배치(masterbatch, MB)를 제조한 후 다시 LDPE와 섞어서 패각 기준 3, 5, 10 wt%의 폴리에틸렌필름을 제조하였다. 생산된 필름의 규격은 폭 40 cm, 두께 40 $mu extrm{m}$ 이었다. 제조된 패각 필름에 대한 기계적 물성 측정 결과 패각의 첨가로 인한 기계적 물성의 큰 저하는 관찰되지 않았으며, 순수 폴리에틸렌 필름 대비 80% 이상의 물성을 유지하였다. 악취제거능은 양이온성 계면활성제로 개질된 패각 필름이 시험된 모든 종류의 악취에 대하여 가장 우수한 악취 흡착 제거능을 보여주었으며, 개질되지 않은 패각 필름도 비교적 우수한 악취제거능을 보여주었다.

• Bulletin of the Korean Chemical Society
• /
• 제27권3호
• /
• pp.368-372
• /
• 2006

The cobalt titanate, $CoTiO_3$ nanoparticles have been prepared by calcinations of precursor obtained from a mixture of $TiO_2$ and $Co(OH)_2$ in aqueous cetyltrimethylammonium bromide (CTAB) solution. The nanoparticles were investigated with X-ray powder diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and thermogravimetric/differential thermal analysis (TGA/DTA) to determine the crystallite size and the phase composition. The spectroscopic characterizations of these nanoparticles were also done with UV-Vis spectroscopy and FT-Raman spectroscopy. XRD patterns show that $CoTiO_3$ phase was formed at calcinations temperature above 600 ${^{\circ}C}$. UV-Vis absorption spectra indicate that the $CoTiO_3$ nanoparticles have significant red shift to the visible region (400-700 nm) with $\lambda_{max}$ = 500 nm compared to pure $TiO_2$ powder ($\lambda_{max}$ = 320 nm). The new absorption peaks (absorption at 696, 604, 520, 478,456, 383, 336, 267, 238, 208 $c m ^{-1}$), which were not appeared in FT-Raman spectra of P-25, also confirm the formation of Ti-O-Co bonds at above 600 ${^{\circ}C}$ and just not the mixtures of titanium dioxide with cobalt oxides.