• 한국자원식물학회지
• /
• 제5권2호
• /
• pp.129-137
• /
• 1992

In order to investigate the Possibility of utilizing corm as a seed corm In taro, the corm classified by the weight was planted on April 20, 1984. The effect of weight of corm (30, 50, 70, 90, 110, 130150r and 170g) on the growth, yield, and quality of taro was compared to those raised from cornel.The corm showed a better emergence rate than cermets regardless of its size. The larger the size ofcorm wasi the more the number of leaves developed, and the fisher the yield was. It was consideredthat the higher yield and better quality of taro was obtained by using larger corm as a mother corm( in the following year) due to the increase in the production of large taros.

• 한국전기전자재료학회논문지
• /
• 제12권1호
• /
• pp.94-102
• /
• 1999

Ni/CGO cermets were fabricated as the anode for SOFC which uses CGO as the electrolyte. And their electrical conductivity, electrochemical reactivity, and thermal expansion coefficient were optimized through the variation of NiO/CGO particle size ration and their composition. The electrical conductivity of the cermet was increased abruptly at a certain Ni content and the percolation concentration was decreased with the decreasing particle size ratio. Anodic overpotential was also decreased with the decreasing particle size ratio. For a fixed ratio it showed a minimum value at 50 wt.%. Thermal expansion coefficient was increased monotonically with increasing Ni contents, however it did not depend on the size ratio. With three properties taken into account, the cermet of particle size ration of 0.03 and composition of 50 wt.% was judged to be optimal as the anode.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.293-294
• /
• 2006

Laser Powder Deposition (LPD) is a technology capable of modifying a metallic structure by adding the appropriate material to perform a desired function. LPD offers a unique fabrication technique that allows the use of soft (tough) materials as base structures. Through LPD a hard material can be applied to the base material with little thermal input (minimal dilution and heat-affected-zone {HAZ}), thus providing the function of a heat treatment or other surface modifications. These surface modifications have been evaluated through standard wear testing (ASTM G-65), surface hardness (Rc), micro-hardness (vickers), and optical microscopy.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.631-632
• /
• 2006

Cr-C-Ni composites were synthesized in situ from elemental powders of Cr, Ni and C by high energy milling followed by reactive sintering. The milled powders with the grain size in nano-scale were pressed to compacts and sintered. During the following thermal treatment at first the chromium carbide was formed and then the $Cr_3C_2-Ni$ cermets were sintered in one cycle. The interface between the binder phase and the carbide grains of the in situ composite has a good bonding strength as it is not contaminated with oxidation films or other detrimental surface reactions.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.618-619
• /
• 2006

The binder phase for TiC reinforced steel matrix composite was added in the form of elemental powders and master alloy powders. The microstructures, binder phase variation with TiC content and mechanical properties were evaluated. The addition of a type of binder phase largely effects the microstructure and mechanical properties. The binder phase variation from starting composition was observed with increase in wt% TiC content and this variation was higher when the master alloy powders were used as a binder. The response to heat treatment was decreased with an increase in TiC content due to the shift of binder phase from the starting composition.

• 한국결정성장학회지
• /
• 제21권1호
• /
• pp.21-26
• /
• 2011

Ni-YSZ(Yttria Stabilized Zirconia) composite powders를 glycine nitrate process으로 만들었다. 합성된 분말은 $1300{\sim}1400^{\circ}C$ 4시간 동안 소성하였으며 $1000^{\circ}C$에서 2시간 동안 질소 및 수소 분위기에서 환원 소성하여 Ni-YSZ cermet을 제조하였다. Ni의 부피비를 변화 시켜 각기 그들의 미세구조, 전기전도도, 열팽창 및 강도 특성을 알아보았다. Ni과 YSZ 상 사이에 상호 연결된 균질하게 분포된 다공성 미세구조를 얻을 수 있었다. 기공률, 전기전도도, 열팽창계수 및 곡강도 모두 Ni의 양에 민감하게 영향 받는 것을 알 수 있으며 40 vol%의 Ni를 함유한 Ni-YSZ cermet가 전극재료로 가장 적당하였다. $1350^{\circ}C$에서 소성한 40 vol% Ni-YSZ 시편의 경우 30 %의 기공율, 65.5 Mpa의 강도, 917.4 S/cm의 전기 전도도($1000^{\circ}C$)및 $12.6{\times}10^{-6}^{\circ}C^{-1}$의 열팽창계수($1000^{\circ}C$)를 가져 YSZ 전해질의 음극재료로 가장 적합하였다.

• 한국재료학회지
• /
• 제14권10호
• /
• pp.743-748
• /
• 2004

Modified Ni/YSZ cermets for high temperature electrolysis were synthesized by the direct ball milling of Ni and YSZ powder. The ball milling was carried out in dry process and in ethanol with varying milling time. While the dry-milling decreased the average size from 65 to $80{\mu}m$, the wet-milling decreased the average size down to $10{\mu}m$. In addition, very fine particles less than $0.1{\mu}m$ were observed in the wet-milling condition. The subsequent process of cold-pressing and sintering at $900^{\circ}C$ for 2 h did not affect the particle size of dry-milled powder. The electrical conductivity of the dry-milled Ni/YSZ cermet showed the value of $5{\times}10^{2}\;S/cm$ and this value was increased to $1.4{\times}10^{4}\;S/cm$ after the sintering at $900^{\circ}C$ for 2 h.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권1호
• /
• pp.19-26
• /
• 2004

The growth of solid particles in TiC-XC-2vo1.% and TiC-XC-30vo1.% Ni alloys, (where X=Zr, W or Mo) was fitted to the equation of the form $d^3$-${do}^3$=Kt during the liquid phase sintering at 1,673K. Also, the grain growth behavior decreased markedly with the addition of ${MO}_2$C or WC and increased with the addition of zrC. The contiguity was greater in the alloys with a smaller growth rate constant and especially, decreased by increasing the Ni content in the TiC-${MO}_2$C-Ni alloy. In addition, the effect of the addition of carbide on the grain growth of 2 vo1.% Ni alloys was found to be similar to that of 30vo1.% Ni alloys. Consequently, the grain growth mechanism cannot be explained by the usual solution / reprecipitation process, but can be explained in terms of a new growth velocity equation, which includes the effects of contiguous carbide grain boundaries in restricting the overall grain growth, as well as the area of the solid / liquid interface in the alloy.

• 소성∙가공
• /
• 제18권6호
• /
• pp.465-470
• /
• 2009

The frictional behaviors of Cermets/Cr-Ceramics and Cu-Al coatings of piston ring were investigated. Friction tests were carried out by pin-on-disk test and materials properties of coating layer were analyzed by nano indentation tester. The effect of surface roughness of cylinder liner on the friction coefficient was analyzed. This study provided tribological data of hard and soft piston ring coatings against cylinder liner. The surface roughness does exert an influence on the average friction coefficient, with smoother surfaces generally yielding lower friction coefficients. In case of hard-coating, the scratch depth, width and pile-up height had close relationship with hardness. So the scratch width, depth and pile-up height increases with decreasing friction coefficient. But in case of soft-coating, the friction coefficients are strongly dependent on the morphological characteristics such as, scratch depth, width, pile-up height and elastic modulus.

• 한국자원식물학회지
• /
• 제15권2호
• /
• pp.172-176
• /
• 2002

토란 재배시 종우가 부족할 경우 절편자우를 종우로 활용하는 방법을 연구하고자 본 시험을 실시한 결과는 다음과 같다. 1. 토란의 출현은 절편자우의 크기 별로 차이가 인정되지 않았고, 출현율은 90% 이상 출현되었다. 2. 생육은 절편자우가 클수록 엽병장이 크고 엽병속수가 많아 양호하였다. 3. 토란 절편자우의 크기에 따른 괴경과 부산물인 엽병의 수량은 크기간에 유의성이 인정되어 절편자우가 클수록 수량이 증수되는 경향으로 절편자우 20g을 종우로 사용할 경우 10g당 1,981kg을 생산할 수가 있었다. 이와 같은 결과로 보아 절편자우가 20g 이상인 것을 종우로 사용할 경우 토란의 재배가 가능할 것으로 본다.