International Journal of Precision Engineering and Manufacturing

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Quantitative Investigation of Grain Growth in Carbide Added(Mo$_2$C, ZrC and WC) to TiC-Ni Matrix Cermets

  • Kim, Soon-Ho (Dept. of Automotive Mechanical Engineering, Silla University)
  • Published : 2004.01.01
⟨ Previous Next ⟩

Abstract

The growth of solid particles in TiC-XC-2vo1.% and TiC-XC-30vo1.% Ni alloys, (where X=Zr, W or Mo) was fitted to the equation of the form $d^3$-${do}^3$=Kt during the liquid phase sintering at 1,673K. Also, the grain growth behavior decreased markedly with the addition of ${MO}_2$C or WC and increased with the addition of zrC. The contiguity was greater in the alloys with a smaller growth rate constant and especially, decreased by increasing the Ni content in the TiC-${MO}_2$C-Ni alloy. In addition, the effect of the addition of carbide on the grain growth of 2 vo1.% Ni alloys was found to be similar to that of 30vo1.% Ni alloys. Consequently, the grain growth mechanism cannot be explained by the usual solution / reprecipitation process, but can be explained in terms of a new growth velocity equation, which includes the effects of contiguous carbide grain boundaries in restricting the overall grain growth, as well as the area of the solid / liquid interface in the alloy.

Keywords

References

  1. Parikh, N. M., 'Liquid phase sintering, ' J. Amer. Ceram. Soc., vol. 40, pp.335-338, 1957 https://doi.org/10.1111/j.1151-2916.1957.tb12547.x
  2. Doi, H., 'Grain growth SbN4-Based materials,' Science of Hard Materials, Adam Hilger Ltd., Bristol and Boston, pp.312-313, 1984
  3. Matsubara, H., and Sakuma, T., Proc. of the International Institute of Sintering Symposium, Elsrvier Applied Science, pp.1269-1271, 1987
  4. Warren, R., 'Growth of Carbide Particles in TicNi and $Tic-Mo_2C-Ni$ Cennets during Liquid Phase Sintering,' J. Less-Com. Met., pp.17-65, 1969
  5. Exner, H. E., 'Theorie der Alterung von Niederschlagen Durch Umlosen,' Z. Metallkde, pp. 264-273, 1973
  6. Exner, H. E., Marita E. S. and Petzow, G., Mod. Dev. 'The Kinetics of Precipitation from Supersaturated Solid Solutions,' Powder Met., ed., Hausner, H., Plenum Press, New York, pp.315-318, 1971
  7. Lindau L. and Stjernberg, K. G., 'Kinetics of Coarsening of Spherical Particles in a Liquid Matrix,' Powder Met., pp.19-21, 1976
  8. Suzuki, H., Hayashi K. and Terada, O., 'Clustering Kinetics in Binary Alloys,' J. Japan Inst. Met., pp.935-936, 1971
  9. Chennant J. L. and Coaster, M., 'The Effect of Volume Fraction on Particle Coarsening: Theoretical Considerations,' J. Microscopy, pp.209-269, 1977
  10. LifShitz I. M. and Slyozov, V. V., 'The Dependence of Ostwald Ripening kinetics on Particle Volume Fraction,' J. Phys. Chern. Solid s,' pp.19-35, 1961
  11. Wagner, C., 'Final Stage Processes' Z. Elektrochern., pp.65-70, 1961
  12. Stover E. R. and Wulff J., 'The Effect of Volume Fraction Precipitate on Ostwald Ripening,' Trans. Met. Soc. AIME, pp.115-127, 1959
  13. Warren R. and Waldron, M. B., 'Carbide Grain Growth,' Powder Metallurgy, pp.150-180, 1972
  14. Voorhees, P. W. and Glicksman, M. E., 'Microstructural Development during the LiquidPhase Sintering of VC-Co alloys,' Metall. Trans., 15A pp.1081-1085, 1984
  15. Yang, S. G., Mani, S. S. and German, R. M., ' Diffusion of Calcium and Silicon in a limealumin- silica slag,' JOM, April, pp.11-20, 1990
  16. Stephenson, I. M. and White, J., 'Sintering : in Reactivity of Solids,' Trans. Brit. Ceramic Soc., pp.66-71, 1967
  17. Kim, S. S. and Yoon, D. N., 'Microstructural Development during the Liquid-Phase Sintering of TiC-Co alloys,' Acta Met., pp.31-35, 1983