• 대한치과보철학회지
• /
• 제42권1호
• /
• pp.41-48
• /
• 2004

Statement of problem : The Cement as well as restoration required esthetics for making natural color restoration. Purpose : The purpose of this research is to evaluate color stability of restoration intermediated by resin cement which is used for cementation of all ceramic crown. Material and method : After making Empress 2 ingot into the size of $10mm{\times}10mm{\times}1mm$ according to indication, it glazed and made 48 Empress 2 blocks. Three kinds of resin cement(Rely-X, Variolink 2, Choice) having same shade cemented between Empress 2 blocks and Ivory shade tiles and made 48 specimens in the thickness of $30{\mu}m$ and $80{\mu}m$. After measureing color difference using spectorphotomenter, the result of this study were as follows. Results : The color difference of resin cement used in experiment increased in the order Rely-X, Variolink 2. As the thickness of cement increases, the color difference of all kinds of cement found statistically sifnificant difference but, this result is clinically acceptable. Conclusion : More resarch would have to be done in order to decrease the color difference as cement's thickness.

• 한국결정성장학회지
• /
• 제25권1호
• /
• pp.20-26
• /
• 2015

세라믹 잉크젯 기술은 아트타일, 장식용 도자기 등에 이용되고 있으며, 원료의 효율이 높고 낮은 제작비용으로 다양한 이미지를 빠르고 정확하게 인쇄할 수 있다는 장점을 가지고 있다. 잉크젯 프린팅 타일에 나노세라믹안료를 적용하기 위해서는 안정적인 잉크분산성 확보가 필수적이다. 본 논문에서는 잉크젯 인쇄용 수계 pink-red 세라믹잉크의 특성을 보여주고 있다. $CaCr_{0.1}Sn_{0.8}SiO_5$ 안료는 고상법을 이용하여 합성하였고, 잉크 토출 시 잉크젯 헤드의 노즐 막힘을 방지하기 위해 어트리션밀을 이용하여 분쇄한 안료를 사용 하였다. 수계 세라믹잉크 제조 시 $CaCr_{0.1}Sn_{0.8}SiO_5$ 나노안료의 농도는 10 wt%로 고정하였고, sodium dodecyl sulfate(SDS)를 0.4 wt% 첨가 하였을 때 최적의 분산성을 가지는 것을 확인할 수 있었다. 또한 수계 세라믹 잉크의 원활한 토출을 위해 polyvinyl alcohol(PVA)을 0.18 wt% 첨가하여 점도 조절을 하였다. 제조된 pinkred 세라믹 잉크는 토출 시 $180{\mu}s$ 이후 구형의 단일액적을 형성 하는 것을 확인할 수 있었다.

• 한국세라믹학회지
• /
• 제44권3호
• /
• pp.162-168
• /
• 2007

Silica wet gels were prepared ken water glass ($29\;wt%\;SiO_{2}$) by using Amberlite as a ion exchange resin. After washing in distilled water, the wet gels were further aged in a solution of TEOS/EtOH to strengthen of 3-dimensional network structure. As increase TEOS content in aging solution, BET surface area and porosity of the ambient dried silica aerogels were significantly decreased, and average pore diameter was also decreased 30 nm to -10 nm. Also, higher density and compressive strength were obtained in case of higher TEOS content. This is due to precipitation of $SiO_{2}$ nano particles by TEOS. Hence, TEOS addition plays an important role of both strengthening and stiffness of silica wet gel network. By adding over 30 vol% TEOS, a crack-free monolithic silica aerogel tiles were obtained and its density, compressive strength, and thermal conductivity were shown $0.232g/cm^{3}$, 7.3 MPa, and 0.029 W/mk, respectivly.

• 한국세라믹학회지
• /
• 제33권7호
• /
• pp.771-778
• /
• 1996

Utilization of fly ash by-produced from coal fired power plants and classified as general waste became very important problem to solve in the environmental protection and recycling of waste materials. The possibility of large scale substitution of fly ash as a raw material for bricks and wet tiles was highly expected because the chemical compositions of fly ash were mostly Al2O3 and SiO2 and the properties of it were very similar with clay. Accordingly in order to investigate the substitutional limit these specimens were substituted from 0 to 100 wt% fly ash by 20wt% increment for clay. Fly ash-clay bodies were fired at 1200, 1250 and 130$0^{\circ}C$ and then their properties were measured, It was found that these specimens sintered at 125$0^{\circ}C$ had a good bending strength. Especially when these sintered bodies were added to 20, 40 and 60 wt% fly ash the bending strength of those were 201 , 205 and 191kg.cm2 respectively with the water absorption below 1%, This showed that fly ash could be substituted ab 60 wt% in this experiment.

• 한국조경학회지
• /
• 제30권2호
• /
• pp.63-69
• /
• 2002

The Second Namsan Tunnel required renovation. The landscape design was conducted as part of the comprehensive programs for renovation. The landscape design covered site analysis, design development, a working drawing and a maintenance plan. In May of 2001, the Second Namsan Tunnel was renovated and reopened to traffic. The tunnel was recreated as a new type of tunnel with function and beauty. The entrance and retaining wall of the tunnel has public character. Users are greatly affected by the entrance and retaining walls along roads. The landscape architect had to find new materials and methods to improve the environment and to combine artwork with the entrance and walls of the tunnel. The surface of the tunnel entrance and retaining walls are artistically treated with ceramic tiles and paint. Various regional characteristics and cultural meaning are symbolically expressed. Or the tunnel entrance from the Joong-gu side, entitled "Glory of the Future", the hibiscus symbolizes the bright and glorious future of Korea. On the retaining walls, entitled "Hope", the promising Joong-gu is symbolized through image of Korean magpies, mountains, rocks, roses, winds and nature. As for the tunnel entrance from the Yongsan-gu side, entitled "Vivid Spirit", pine trees symbolize the Koreans′strong will and an enterprising spirit. On the retaining walls, entitled "Lively Motions", Yongsan-gu is symbolized through image of pigeons, mountains, rocks, roses, winds and clear skys. The entrance and retaining wall of the Second Namsan Tunnel, whose surfaces are treated with tiles and paint with artistic value, would create an atmosphere using large-scale wall paintings. In this artwork, users would perceive a unique sense of place through the symbolic images of the vertical planes of the tunnel.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2007년도 춘계학술대회 논문집
• /
• pp.81-84
• /
• 2007

The purpose of this study was to grasp actual condition of remodeling elements by specialists' in-depth interviews. The interview has been conducted to interior designer who have a wide experience of apartment remodeling. In-depth interview is a kind of qualitative method in which attention to reply of responses with open-access between interviewer and respondents. According to the results, remodeling elements were generally the renovation of balcony into the livingroom or children room, removal a doorsill, installation of storage furniture, change of lighting fixtures in the all rooms and change equipments of bathroom. Finishing materials were usual used normal wallpaper and normal or low emitting adhesive on ceiling and wall, tempered-flooring on floor, and ceramic tiles on bottom and wall of bath and entrance.

• 보존과학회지
• /
• 제27권2호
• /
• pp.163-179
• /
• 2011

이 연구는 대전 원신흥동 유적에서 출토된 도가니, 토기 및 기와의 재료학적 특성과 원료의 동질성 검토를 통한 원산지 해석을 목적으로 수행하였다. 현미경 관찰 및 X-선 회절분석 결과, 각 시료의 광물조성은 거의 일치하나 기벽의 두께 및 포함된 광물의 분급에서 상당한 차이를 보인다. 이 중 토기는 0.5~0.7cm의 얇은 기벽에 가장 정선된 태토 특성을 보이는 반면 도가니와 기와는 기벽이 1.3~2.5cm로 두꺼우며 분급이 불량한 석영, 정장석 및 사장석이 다량 관찰된다. 도가니의 경우, 태토에 혼합된 짚이 소성과정에서 탄화되어 크고 길쭉한 공극이 관찰되는 느슨한 기질적 특성을 가진다. 이와 같이 재료학적으로 차이를 보이지만 이들은 유적지 토양과 광물조성 및 지구화학적 거동특성이 상당히 일치하고 있어 모두 동일한 모암의 풍화에 의해 생성된 점토를 이용해 제작한 것으로 추정된다. 또한 $1,050{\sim}1,150^{\circ}C$의 소성온도를 경험한 것으로 판단되는 경질토기를 제외하면 모든 세라믹 유물들은 $850{\sim}950^{\circ}C$의 온도영역에서 소성하였을 것으로 해석된다. 한편 도가니의 용융물은 구리와 주석의 편석을 일부 포함한 슬래그로 판단되나 부분적으로 치밀한 적색 및 녹색 유리질 조직이 관찰되는 것으로 보아 유리 용융물의 가능성도 있어 보인다.

• 한국건축시공학회지
• /
• 제21권1호
• /
• pp.11-19
• /
• 2021

본 연구는 타일 떠붙임 시멘트 모르타르의 시멘트 : 잔골재의 혼합 비율인 모르타르 배합비에 따른 품질 특성 및 시공성에 대한 관능 평가를 실시한 것이다. 즉, 타일 시공 후 타일 탈락 하자와 관련한 타일 부착량 및 바탕 부착 하중 시험을 통해 타일 떠붙임 시공 시 콘크리트 바탕면과 타일면의 부착 성상이 서로 다른 것을 알 수 있었다. 또한, 시공성에 관한 관능 평가 결과 타일 떠붙임 모르타르의 시멘트에 대한 잔골재의 질량 비율인 S/C 6 이상은 도기질 타일과의 초기 부착성은 우수하나, 마감 조정성이 불량하고, 바탕면에서 처짐 발생 우려가 있다. 반면, S/C 4 이하는 마감 조정성은 좋으나, 초기 부착성이 저하하고, 바탕면에서 점성에 의한 처짐 등으로 시공성이 저하하며, 부착강도가 저하하여 타일과 모르타르의 계면 탈락 우려가 있는 것으로 평가되었다. 따라서 도기질 타일용 타일 떠붙임 모르타르의 우수한 품질 및 시공성을 확보하기 위해서는 S/C 5 전후가 가장 적정한 혼합 비율로 평가되었다.

• 한국조경학회지
• /
• 제29권4호
• /
• pp.67-74
• /
• 2001

This paper presents a landscape design for the citizen plaza around the ˝Woojeongchongkuk˝(the 1st Korean postal building) where the ˝Gapsinjeongbyeon˝(1844 coup d´etat) occurred and which was once used as the ˝Jeoneoigam˝(a palace hospital). The site is located in 39 Kyeonji-dong, Jongno-gu, Seoul, and of which area is about 2,013$m^2$. The landscape design goals are to build traditional spaces which fit the traditional buildings and where people feel the old atmosphere; to build interesting spaces where people can learn the post and telegraphic history; and to build nature-friendly green rest spaces in the city. To achieve these goals, symbolic, traditional, educational, historical, and environmentally-friendly concepts are developed. With this concept the space is divided into two axis of the pst and telegraph of Korea. Along the two axis the Postage Stamp ˝Madang˝(yard), the Letter Garden, the Telegraphic ˝Ddeul˝(garden), the Communication Plaza, and the ˝Jeoneoigam˝(old palace hospital) and the ˝Gapsinjeongbyeon˝(1884 coup d´etat) Memorial Place are arranged. The Postal Stamp Madang which symbolizes the first Korean postage stamp is a space for studying history and evolution of stamps in Korea. The Letter Garden which symbolizes and formalizes a letter paper is composed with white bamboo trees which are planted linearly and long granite benches on which famous letters are carved. In the Telegraphic Ddeul which symbolizes the telegraph, the history of the telegraphic instrument and the telephone is exhibited. In the Communication Plaze which symbolizes future post and telegraph service extending to the world, the images of satellite communication, internet, webmail etc. are exhibited. The Jeoneoigan, and the Gapsinjeongbyeon Memorial Place is for memorializing the historic place and events. Throughout the whole place, various models and ceramic picture tiles about the post and telegraph and exhibited for effective education. In conclusion, sustainable management schemes for the site are suggested.

• 한국세라믹학회지
• /
• 제44권11호
• /
• pp.639-644
• /
• 2007

Spinel pigments, developing black color in high temperature glazes at oxidation or reduction atmosphere, without CoO because of its high price were synthesized by solid solution method. Ten mixed compositions consisted of NiO, MnO, $Fe_2O_3 and $Mn_2O_3$ were fired at $1250^{\circ}C$ for 1h. The resulting pigments were characterized by using XRD, FT-IR, SEM and UV-vis spectrometer. Structure of the pigments are spinel and particles' shape are spherical or cubic. Glazed tiles containing 5 wt% pigments were fired at $1260^{\circ}C$ and $1240^{\circ}C$ in reduction atmosphere. Color in glazes were analyzed by UV-vis spectrometer. Colors of NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.4875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0125 mole% and NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.3875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.1125 mole% in lime glaze showed black in oxidation, in reduction NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.4875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0125 mole% and NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.55{\cdot}Mn_2O_3$ 0.0125 mole% showed black. In case of lime-barium glaze, NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.3875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.1125 mole%, NiO 0.975 MnO $0.075{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0625 mole% and NiO 0.925 MnO $0.075{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0625 mole% showed black color in oxidation and NiO 0.875 MnO $0.125{\cdot}Fe_2O_3$ $0.3875{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.1125 mole%, NiO 0.925 MnO $0.075{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0625 mole% and NiO 0.725 MnO $0.275{\cdot}Fe_2O_3$ $0.4375{\cdot}Cr_2O_3$ $0.50{\cdot}Mn_2O_3$ 0.0625 mole% showed black one in reduction.