Thermal design is required with considering thermal stability to verify the reliability of electric power device with using IGBT. Numerical analysis is performed to analyzed the change in thermal resistance with respect to the various thermal density of heating element. Correlations between thermal resistance and heat generation density are established. With using these correlations, performance curve is composed with respect to the change in thermal resistance of cooling conditions for natural convection and forced convection. Thermal fatigue is occurred at the Inside and outside of IGBT by repeated heat load. The crack is occurred between base plate and ceramic substrate for the inside. When the crack length is 4mm, the failure is occurred. Therefore, Thermal design method considering thermal density, thermal fatigue resistance is presented on this study and it is expected to thermal design with considering life prediction.
Space applications of the motion have been served with DC motors for decades. But their functionality with a gearbox and lubricants and their weights are always an issue for its application. A piezo-motor has an advantage on the direct driving with higher accuracy, smaller size, and no-EMI. We use the piezo-motor to rotate a filter wheel directly in a balloon-borne coronagraph launched on September 2019. The piezo-motor works well in a temperature range from -10 to 40 Celsius with high reliability and high positioning / tilt accuracy (~0.1degree) with a photo-encoder. We verify its functionality for 7 days. In this talk, we report the design, test processes of the filter wheel including its balloon flight result.
본 논문에서는 3차원 영상을 위한 LADAR(LAser Detection And Ranging)용 광검출기 모듈을 설계-제작하고 그 특성을 측정한 결과를 보고한다. 광검출기 모듈은 광파이버 어레이와 접속될 수 있도록 200 um 직경을 갖는 InGaAs APD(Avalanche Photodiode)로 설계-제작하였으며, 선형모드 동작 특성을 만족하도록 TIA(Trans-impedance Amplifier)를 설계-제작하였다. 광검출기 모듈을 구성하는 핵심부품들은 12개의 lead pin을 갖는 TO8 상에 집적되었으며, 집적에 필요한 APD 서브마운트 및 TIA 회로 등을 자체적으로 설계-제작하여 사용하였다. 제작한 광검출기 모듈은 450 ps의 rising time과 780 MHz의 대역폭 특성을 보였으며, 0.8 mV 이하의 잡음 특성과, 150 nW의 MDS(Minimum Detectable Signal) 신호 크기에 대해 15 이상의 신호대 잡음비(SNR)를 보임으로써 설계한 모든 특성을 만족하였는데, 이는 저자들이 아는 한 200 um 직경의 대면적 InGaAs APD를 이용한 광수신기에서 가장 우수한 특성을 나타낸 것이다.
본 연구에서는 관형보다 단위시간당 투과량이 월등히 많은 다채널 세라믹 분리막을 사용하였으며, 고도정수처리 혼성공정은 모듈 내부와 다채널 정밀여과막 외부 사의의 공간에 입상활성탄(GAC)을 충전하여 구성하였다. 정수 원수 중의 자연산 유기물(NOM)과 미세 무기 입자를 대체하기 위해, 휴믹산(humic acid)과 카올린(kaolin) 모사용액을 사용하였다. 유기물질의 영향을 살펴보기 위해 일정한 30mg/L의 카올린 농도에서 휴믹산(humic acid)의 농도를 $2{\sim}10\;mg/L$로 변화시켰다. 그 결과, 막오염의 저항($R_f$)과 투과선속(J)은 휴믹산의 농도에 따라 큰 영향을 받았다. 또한 역세척 주기(FT)의 영향을 살펴본 결과, 더 짧은 FT는 빈번한 역세척으로 막오염의 감소와 투과선속의 향상에 더 효과적이었다. 그러나 운전비용을 고려하면, 최적 FT조건은 8분이였다. 한편, 이 다채널 정밀여과막 및 GAC 혼성공정을 호소수에 적용한 결과, 평균 처리효율은 탁도 98.02%, $UV_{254}$ 흡괌도 75.64%, 총용존고형물(TDS) 7.18%, 화학적산소요구량 84.73%이었다.
본 논문에서는 정밀 세라믹 부품을 이용한 MBS(Micro-Block Stacking) 방법으로 1550 nm 파장의 아날로그 신호 수신과 1310nm/1490nm 파장의 디지털 신호 송, 수신이 가능한 8 pin mini DIL 형태의 집적형 Triplexer를 제작하였다. 제작된 전체 어셈블리는 $5.40mm{\times}2.15mm{\times}1.05mm$ 크기로 통신용 광모듈 국제 표준인 MSA(Multi Source Agreement) 규격의 SFP(Small Form Pluggable) 광모듈 제작이 가능하다. 자동 능동 광정렬 장비를 사용하여 제작된 집적형 Triplexer를 단일모드 광섬유에 광정렬하였을 때, 1310 nm 송신부 최대 광출력이 -14.5 dBm이었고, 송신부에 의하여 위치가 자동 정렬된 1550 nm와 1490 nm 수신부 수신감도는 각각 0.83 A/W, 0.73 A/W로 단거리 통신에 적용 가능한 값을 얻었다.
A 5 kW class SOFC system for cogeneration power units was consisted of a hot box part and cold BOPs. High temperature components such as a stack, a fuel reformer, a catalytic combustor, and heat exchanges are arranged in the bot box considering their operating temperatures for the system efficiency. The hot box was made of ceramic boards for the thermal insulation. A 5 kW class SOFC stack was composed of 2 sub-modules and each module had 64 cells with $15{\times}15cm^2$ area and stainless steel interconnects. The 5 kW class SOFC system was operated with a hydrogen and a city gas. With a hydrogen, the total power of the stacks was about 7.1 kWDC and electrical efficiency was about 49.3% at 80 A. With a city gas, the total power of the stacks was about 5.7 $kW_{DC}$ and electrical efficiency was about 38.8% at 60 A. Under self-sustained operating condition, the system efficiency including a power conditioning loss and a consumed power by BOPs was about 30.2%.
We present a cost-effective dual polarization quadrature phase-shift coherent receiver module using a silica planar lightwave circuit (PLC) hybrid assembly. Two polarization beam splitters and two $90^{\circ}$ optical hybrids are monolithically integrated in one silica PLC chip with an index contrast of $2%-{\Delta}$. Two four-channel spot-size converter integrated waveguide-photodetector (PD) arrays are bonded on PD carriers for transverse-electric/transverse-magnetic polarization, and butt-coupled to a polished facet of the PLC using a simple chip-to-chip bonding method. Instead of a ceramic sub-mount, a low-cost printed circuit board is applied in the module. A stepped CuW block is used to dissipate the heat generated from trans-impedance amplifiers and to vertically align RF transmission lines. The fabricated coherent receiver shows a 3-dB bandwidth of 26 GHz and a common mode rejection ratio of 16 dB at 22 GHz for a local oscillator optical input. A bit error rate of $8.3{\times}10^{-11}$ is achieved at a 112-Gbps back-to-back transmission with off-line digital signal processing.
본 논문에서는 저온 소성 세라믹(Low-Temperature Co-fired Ceramic: LTCC)에 기초한 밀리미터파 RF SiP(System-in-Package) 모듈 응용을 위하여, CBCPW(Conductor Backed CPW) 전송선과 스트립 라인 대역 통과필터(BPF)에서 기생적으로 발생하는 공진 모드들과 40 GHz 전력 증폭기 모듈의 발진 현상을 분석하고 이를 제거하기 위한 방법들을 제안하였다. CBCPW 구조에서의 기생 구형 도파관(RWG) 모드는 비아의 간격을 줄여 공진 주파수를 높게 하여 동작 주파수 내에서 완전히 억제하였다. 스트립 라인 구조에서는 마주 보는 비아 중한 쪽을 제거하여 대각선으로 비아를 배치함으로써 완전히 제거하였다. CBCPW의 마이크로스트립 패치 공진기 모드들을 제거하기 위하여, 갭을 통한 커플링을 감소시키기 위해 갭에 인접하게 비아를 배치하였다. 그 결과 기생 공진 모드들이 완전히 제거되었다. 40 GHz 대역의 능동 증폭기 모듈의 경우, 상호 연결(interconnection)불연속 효과로 발생한 방사에 의한 인한 누설(cross talk)을 억제하기 위해, LTCC 기판 내부에 내장된 DC 전원 배선과 CPW 전송선의 고 격리 구조를 사용하여 발진 현상을 개선하였다.
Tsurumi, Takaaki;Nam, Song-Min;Mori, Naoko;Kakemoto, Hirofumi;Wada, Satoshi;Akedo, Jun
한국세라믹학회지
/
제40권8호
/
pp.715-719
/
2003
The Aerosol Deposition (AD) process will be proposed as a new fabrication technology for the integrated RF modules. $\alpha$-A1$_2$O$_3$ thick films were successfully grown on glass and Al substrates at room temperature by the AD process. Relative dielectric permittivity and loss tangent of the $Al_2$O$_3$ thick films on Al showed 9.5 and 0.005, respectively. To form microstrip lines on aerosol-deposited A1903 thick films, copper electroplating and lithography processes were employed, and the square-type cross section with sharp edges could be obtained. Low-pass LC filters with 10 GHz cutoff frequency were simulated by an electromagnetic analysis, exhibiting the validity of the AD process as a fabrication technology f3r integrated RF modules.
이동 통신 기기의 광대역화에 따라 기존의 인쇄 회로 기판에 비해 양호한 전기적 특성과 수동형 부품을 내장할 수 있는 LTCC(Low Temperature Co-fired Ceramic)에 대한 많은 연구 개발이 진행되고 있으나 불 균일한 수축으로 인해 적용에 한계를 보여 왔다. 본 연구에서는 짧은 시간내에 온도를 균일하게 올릴 수 있는 혼합 가열 방식을 개발하여 하부에서부터 시편의 얇은 층이 순차적으로 소결 되도록 하는 일 방향 소결의 조건을 제공하여 시편 상부 표면의 배선 형상이 종래의 전기로 가열보다 안정적으로 형성되는 결과를 얻었다. 기판의 소결 특성, 배선의 전기적 특성, 그리고 배선의 기계적 특성 등을 비교한 결과, 기판의 소형화와 배선의 고밀도화에 전기로 가열 보다 혼합 가열이 적용 가능성이 높음을 알 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.