• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.850-853
• /
• 1991

This paper suggests a triple laminated piezoelectric ceramic filter composed of three piezoelectric ceramic vibrators and two sheets of thin insulator, and an equivalent circuit of the filter and several expressions for the resonant frequency; voltage, current, and power gains under the various loads and frequencies; and phase differences between the input and the output voltages are introduced and simulated from its equivalent circuit when two outputs from the side vibrators are connected in series. Those expressions show that this filter has not only a filtering function but also an amplifying function.

• 한국세라믹학회지
• /
• 제45권8호
• /
• pp.464-471
• /
• 2008

The electrolyte separator for thermal battery should be easily handled and loaded a large amount of the molten salt. Ceramic fibers, especially fibrous commercial glass filters were used as an electrolyte separator and the lithium based molten salts were infiltrated into the ceramic filters. The pore structures of the ceramic filter and the melting properties of the lithium salts affected to the electrolyte loading and leakage. During the infiltration, ions of $Li^+$ and $F^-$ in the molten salts were reacted with the glass fiber and caused to be weaken the fiber strength.

• 한국세라믹학회지
• /
• 제35권2호
• /
• pp.201-207
• /
• 1998

A tube-type filter dam(or baffle with holes) for ferrous melt refining is applied to the tundish operation for molten steel having low carbon and ultra-low carbon. The changes in the total oxygen content insoluble aluminum content and the distribution of inclusion size in molten steel during tundish operation were in-vestigated at the pouring part strand and mold of tundish. Removal mechanism of inclusions is considered to be caused by buoyancy action of the filter dam better than filtration action and the size range of in-clusions filtrated by the filter dam was for 30-50$\mu\textrm{m}$. Decrease in deviation of inclusion content in molten steel was confirmed for appling the filter dam in comparison with using conventional dam and weir. Also the filter dam had the advantage of baffle with holes at lower part in the efficiency of inclusions removal.

• 한국세라믹학회지
• /
• 제32권9호
• /
• pp.989-994
• /
• 1995

Rigid porous carbon fiber composites with the uniform pore size distribution were prepared by vacuum forming from water slurries containing carbonized PAN fibers, a phenolic resin and ceramic binders. The composites were designed to use for highly efficient carbon fiber filters for particulate filtration and gas adsorption. As the as-received carbon fibers of 1mm in length were milled to an approximate average length of 300${\mu}{\textrm}{m}$, modulus of rupture (MOR) of the composite filter was increased from 1MPa to the value larger than 5 MPa. Modulus of rupture (MOR) for the composite filter fabricated using the milled carbon fiber was increased from 5 MPa to 10 MPa as the carbonization temperature of the PAN fiber was raised from 90$0^{\circ}C$ to 140$0^{\circ}C$. The air permeability and an average pore size of the composite filter were increased from 40 to 270cc/min.$\textrm{cm}^2$ and from 35 to 80${\mu}{\textrm}{m}$, respectively, as the apparent porosity increased from 80 to 95%. It was shown that the MOR of the carbon fiber composite filter was dependent primarily on the average length of carbon fiber, carbonization temperature and the type of bonding materials.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.339-342
• /
• 1998

A high performance, high-dielectric stripline filter has been developed. The filter consists of planar resonators and its structure is made of high permittivity multilayer ceramic. The performance is distinctive with its attenuation pole. An equivalent lumped circuit is derived to explain the behavior of the attenuation pole quantitatively. A precise design procedure is also described.

• 한국광물학회지
• /
• 제30권4호
• /
• pp.173-178
• /
• 2017

본 연구는 알루미나 기반의 기능성 세라믹 필터의 물리적 특성(강도와 기공률)에 대하여 소결온도와 영가철(ZVI) 함량의 영향을 파악하는 것이다. 기능성 세라믹 필터의 제조공정은 다양한 소결온도($1150^{\circ}C$, $1250^{\circ}C$)와 ZVI 함량(10, 20, 30, 50%)조건에서 수행하였다. 소결온도와 ZVI 함량의 증가됨에 따라 기능성 세라믹 필터의 강도는 증가하였지만 기공률은 감소하였다. 기능성 세라믹 필터의 강도와 기공률은 50%의 ZVI 함량과 $1250^{\circ}C$의 조건에서 각각 99.01 MPa과 34.5%로 나타났다.

• 오토저널
• /
• 제14권6호
• /
• pp.60-66
• /
• 1992

This study describes a theoretical analysis for the wall temperature of ceramic filter trap and pressures of inlet and outlet channel in the filter trap. In this study, the maximum wall temperature through filter trap length with time during the regeneration period showed a tendency moving from forward to backward. The pressure change of filter trap increased at the initial combustion but decreased with the combustion to be activated. So the pressure difference between initial and end regeneration at the inlet channel showed about 2kPa. The thermal regeneration period of this filter trap in the theoretical analysis showed about 200seconds in which the wall temperature was similar to the case of initial condition and the pressure showed about 1 kPa.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.45-46
• /
• 2006

An ultrawide bandpass filter with sharp rejection and wider stopband is designed and implemented using multilayer ceramic configuration. The proposed filter is composed of a broadside coupled structure and a ring type filter with an embedded stripline stub. The measured results show that the fractional bandwidth and upper stopband of the proposed filter are 106 % and better than -30 dB, respectively. The insertion loss is less than 1 dB, and group delay is less than 0.3 ns in the passband. In addition, ring and broadside coupled gap structures are characterized and compared to the proposed structure.

• 한국전자파학회논문지
• /
• 제24권5호
• /
• pp.515-524
• /
• 2013

유전체 세라믹 도파관 필터를 설계할 수 있는 DWFD 프로그램이 ${\lambda}/2$ 스텝 임피던스 타입의 직접 결합 도파관 필터 이론을 사용하여 개발되었다. 1 GHz 대역의 필터 크기를 줄이기 위하여 3차원 적층 형태로 설계하였다. 이에 필요한 S-매개변수값은 개발한 프로그램을 이용하였다. 적층형에 필요한 인덕티브 아이리스들의 치수는 HFSS 시뮬레이션 도구를 사용하였다. 필터는 중심 주파수 881.5 MHz에서 25 MHz 대역폭을 가지는 8단으로 설계하였다. 설계된 도파관 필터는 유전율 35.4의 세라믹을 사용하여 크기를 폭 50 mm에 높이 48 mm로 제작하였다. 측정한 주파수 반응은 시뮬레이션 결과와 일치하였다. 개발한 시뮬레이션 프로그램을 통하여 원하는 형태의 유전체 세라믹 도파관 필터를 쉽고 효율적으로 설계, 제작이 가능하도록 하였다.

• 한국세라믹학회지
• /
• 제43권4호
• /
• pp.199-202
• /
• 2006

In this study, SiC whiskers were grown on a porous SiC diesel particulate filter for nanoparticle filtering. To grow the whiskers at the inner pore without closing the pores, we used chemical vapor infiltration with a solution source and a dilute. As the deposition time increased, the whiskers grew and formed a network structure. After 180 min of deposition, the mean diameter of the whiskers was 174 nm and the compressive strength was 58.4 MPa. The pores shrank from $10{\mu}m\;to\;0.4{\mu}m$ and, because the whiskers filed the inner pores, the gradient of permeability decreased as the deposition time increased. However, by using the network structure of whiskers deposited for 120 min and 180 min, we obtained a diesel particulate filter with pores of $0.98{\mu}m\;and\;0.4{\mu}m$, respectively. Furthermore, the filter shows better permeability than a porous body with pores of $1{\mu}m$. In short, by filtering the nanoparticulate materials, the network structure of whiskers improves the strength, reduces the pore size and minimizes the permeability drop.