• 한국세라믹학회지
• /
• 제54권5호
• /
• pp.400-405
• /
• 2017

$P_2O_5-ZnO-SiO_2-R_2O$ glasses were synthesized as a sealing material for large scale dye-sensitized solar cells (DSSC). Compositional effects of $P_2O_5$ and ZnO were examined by varying their contents. Their viscosity and glass stability at sintering temperatures of less than $550^{\circ}C$ were examined by flow button test. Glass transition temperature and structural change upon compositional change were investigated. Chemical stability against electrolyte was also examined by immersing the glasses in the electrolyte for 72 h at $85^{\circ}C$.

• 한국세라믹학회지
• /
• 제30권11호
• /
• pp.897-904
• /
• 1993

CdS doped SiO2 glass coating films which are good candidates for the nonlinear optical materials were prepared by the Sol-Gel method. TEOS, C2H5OH, H2O and HCl were used as starting materials to obtain SiO2 matrix solutions. Then Cd(NO3)2.2H2O and CS(NH2)2 were dissolved into the SiO2 matrix solutions. Coating was performed several times in order to increase the thickness of coated film by the dip-coating method. Then heat treatments were carried out to control the size of CdS microcrystals doped in SiO2 glass matrix with respect to temperatures and times. CdS-doped SiO2 transparent coating films were successfully obtained. CdS crystals were changed from cubic to hexagonal type about $600^{\circ}C$.

• 한국세라믹학회지
• /
• 제37권1호
• /
• pp.33-43
• /
• 2000

Up-conversion of rare-earth element added glass is promising area for short wavelength laser source by utilizing high power semiconductor infra-red laser if the efficiency can be increased by proper method. In this study, relatively low phonon energy fluoride glasses were prepared by co-doping rare-earth elements to realize the high efficiency up-convertor. The physical, chemical, andoptical properties of co-doped fluoride glasses were measured. 10 combinations of 5 different rare-earth fluoride elements doped samples were prepared and their transition temperatures, chemical durability, density, hardness, refractive index, absorption, fluorescence, and fluorescence lifetime were measured. 480nm wavelengths blue up-conversion was found in the Yb3+/Tm3+ co-doped glass sample with 800nm laser source and the optimum composition for the most efficient blue up-conversion was found from the glass sample with 0.3 mol% TmF3 and 1 mol% YbF3.

• 한국세라믹학회지
• /
• 제37권1호
• /
• pp.77-81
• /
• 2000

Silica glass films to utilize optical waveguides was fabricated by Aerosol Flame Deposition(AFD) method. As the amount of B2O3 increased in the sol solution of (92-x)SiO2-xB2O3-8P2O5, the thermophoretic deposition rate onto Si substrate was markedly lowered due to vaporizing out of B2O3 and P2O5 during the vaporization and reaction of the aerosol in the flame. GeO2 was added to 62SiO2-30B2O3-8P2O5 in order to control easily the refractive index of glass films. As the amount of GeO2 increased from 2 to 12 wt%, its refractive index increased from 1.4633 up to 1.4716.

• 한국세라믹학회지
• /
• 제37권8호
• /
• pp.811-816
• /
• 2000

This paper discussed hydrothermal reactivity of Ca(OH)2 and classified bituminous fly ashes which were collected at an electrostatic precipitator in coal fired power plant at 181$^{\circ}C$. The major products of hydrothermal reaction were tobermorite and hydrogrossularite because bituminous fly ashes contained Al2O3 content greater than 20 wt%. As increasing amount of Al2O3 content greater than 20 wt%. As increasing amount of Al2O3 in glass phases, formation of hydrogrossularite increased. Formation rate of crystalline tobermorite increased with content of finer particles, higher glass content and more Al2O3 in glass phases. There was a positive correlation between residue on 45${\mu}{\textrm}{m}$ sieve and hydrothermal reactivity of fly ash up to 3 hours. The hydrothermal reactivity of fly ash at 181$^{\circ}C$ for 12 hours was more affected by fineness than by glass content of fly ash.

• 한국세라믹학회지
• /
• 제11권3호
• /
• pp.19-26
• /
• 1974

Mechanical properties of the system PbO-B2O3-V2O5 low melting glass during crystallization by heat-treatment were investigated. Wettability of the system PbO-B2O3-V2O5 was excellent and appropriate for commercial sealing as a low melting solder glass. Crystals, during heat-treated at 30$0^{\circ}C$ of the system PbO-B2O3-V2O5 were $\beta$-4PbO.B2O3, 5PbO.4B2O3, and Pb2V2O7 mainly. The percent of crystallinity was 82$\pm$5%. Mechanical properties of the system PbO-B2O3-V2O5 were influenced not only by the differences of density and coefficient of thermal expansion and the stress induced from the difference in the density and coefficient of thermal expansion between glass phase and crystals but also crystallization conditions.

• 한국세라믹학회지
• /
• 제20권1호
• /
• pp.70-78
• /
• 1983

This paper discusses the application of Si-Borosilicate glass sealing to a new sealing method which utilizes a large electrostatic field to pormote bound formation at relatively low temperature. Bonding mechanism and the effect of bonding time bonding temperature glass thickness and surface roughness on the bond strength were investigated. Application of a de voltage across bonded specimen gradually produced a layer of glass adjacent silicon which was depleted of mobile ions. As a consequence a n increasingly larger fraction of the applied voltage appeared across the depleted region and very large electric field resulted This field accompanyed by large electrostatic force acted as driving force the of strong bond. And stronger bond was formed with increasing bonding time and temperature. A low temperature preoxidation is advantageous for the Si surface having a rougher surface finish that 1 microinch.

• 한국결정성장학회지
• /
• 제19권2호
• /
• pp.79-83
• /
• 2009

저열팽창계수를 갖는 재료를 개발하기 위하여 $Li_{2}O-Al_{2}O_{3}-SiO_{2}$계 glass-ceramics를 제조하고 그 특성을 조사하였다. 이 계의 유리를 $775^{\circ}C$에서 2시간 가열하여 핵생성시키고 $825{\sim}900^{\circ}C$로 가열하여 2시간 결정화하였다. 결정화 유리의 결정구조는 단일상의 $\beta$-quartz solid solution($Li_{x}Al_{x}Si_{1-x}O_{2}$)이었고, 열팽창계수는 $25{\sim}300^{\circ}C$에서 $4.40{\times}10^{-7}{\sim}1.33{\times}10^{-6}K^{-1}$를, 그리고 $25{\sim}800^{\circ}C$에서는 $1.56{\times}10^{-6}{\sim}2.53{\times}10^{-6}K^{-1}$를 보였으며 저온 영역의 열팽창율보다는 고온 영역의 열팽창율이 더 높은 값을 보였다. 이 계의 결정화 유리의 기계적 강도는 결정화 온도에 의존하지 않고 대체로 110 Mpa의 높은 값을 보였다.

• 한국결정성장학회지
• /
• 제23권5호
• /
• pp.246-254
• /
• 2013

LED 조명등의 내구성 문제를 개선할 목적으로 광 확산판에 사용되는 폴리카보네이트 소재를 대체하기 위하여 반투명 유백유리를 제조하였다. 유백유리의 유백제로서 인산칼슘을 사용하였고, $1550^{\circ}C$ 전기로에서 2시간 용융하였다. 유백유리는 용융유리가 성형된 후 냉각 열처리 과정에서 상분리 및 유백입자의 성장에 의해 만들어진다. 따라서 성형 및 냉각온도를 상온, $850^{\circ}C$, $1100^{\circ}C$ 및 $1200^{\circ}C$ 로 변화시키면서 유백특성의 영향을 확인하였다. 결과적으로 가장 고온인 $1200^{\circ}C$에서 성형 및 냉각을 한 샘플에서 가장 양호한 특성을 갖는 유백유리가 얻어졌다. 이 유리는 82 % 이상의 높은 Haze 값과 10 % 미만의 낮은 평행광 투과도에 의해 직사광 투과에 의한 눈부심이 없이 LED 조명용 광확산판으로서 우수한 광특성을 나타내었다. 또한 열적특성으로서 $6.309{\times}10^{-6}/^{\circ}C$의 열팽창 계수와 $839^{\circ}C$의 연화점을 나타내었다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.140.2-140
• /
• 2003