• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.287-289
• /
• 2004

Tilting train has been developed to increase the operational speed of the trains on conventional lines which have many curves. This train are tilted at curves to compensate for unbalanced carbody centrifugal acceleration to a greater extent than compensation produced by the track cant, so that passengers do not feel centrifugal acceleration and thus trains can run at higher speed at curves. This paper investigated train formation of TTX(tilting train express) with maximum operation speed 180 km/h.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1340-1341
• /
• 2008

에폭시-Organoclay 나노콤포지트를 두가지 분산기법으로 적용하여 제조하였다. 하나는 Centrifugal 기법과 또다른 하는 강력초음파를 이용하여 제조하였다. 초음파를 적용하지 않고 Centrifugal만으로 제조된 나노콤포지트를 충진함량별 교류/직류정극성 전압을 인가한 절연파괴 특성과 Organoclay 종류별 교류절연파괴 특성을 연구하였다. 충진함량 특성으로 원형에비하여 나노콤포지트의 절연파괴 특성을 향상되었고, 함량이 5wt%까지는 거의 같은 파괴강도를 나타내었고, 이후 함량이 증가될수록 오히려 감소되는 경향을 나타내었다. 종류별 Organoclay의 경우 10A특성이 가장 높은 교류절연파괴 강도를 나타내었다. 초음파를 적용한 경우 함량별 교류절연파괴 강도 역시 초음파를 적용하지 않은 경우와 유사한 함량별 절연파괴 경향을 나타내었다. 파괴강도는 초음파를 적용한 경우가 월등히 높은 47.3%가 향상된 결과를 나타내었다. 이는 향후 몰딩용 및 함침용 절연재료로서 응용될 고압절연물에 크게 이용될 것으로 본다.

• 대한기계학회논문집B
• /
• 제20권11호
• /
• pp.3639-3648
• /
• 1996

The effect of 15% pinched diffuser in a centrifugal air compressor with a cascade airfoil diffuser on the aerodynamic performance is investigated using a numerical approach. The commercial CFD code for three-dimensional, turbulent, compressible flow fields is executed for various mass flow rates at a design speed which can be obtained as long as the calculation succeeds. The pinched diffuser is found to help improve the instability of flow within vaneless diffuser space, especially the reverse flow near shroud, and to change both stall/surge line and choking line to increase the surge margin. It is also found to generate more favorable increase of static pressure in diffuser region, and to increase the resulting pressure ratio and efficiency.

• International Journal of Oral Biology
• /
• 제40권4호
• /
• pp.161-166
• /
• 2015

Neuronal activities of taste-responsive cells in the nucleus of the solitary tract (NST) are affected by various physiological factors, such as blood glucose level or sodium imbalance. These phenomena suggest that NST taste neurons are under the influence of neural substrates that regulate nutritional homeostasis. In this study, we reviewed a series of in vivo electrophysiological investigations that demonstrate that forebrain nuclei, such as the lateral hypothalamus or central nucleus of the amygdala, send descending projections and modulate neuronal activity of gustatory neurons in the NST. These centrifugal modulations may mediate plasticity of taste response in the NST under different physiological conditions.

• Journal of Power Electronics
• /
• 제9권2호
• /
• pp.243-258
• /
• 2009

Bearingless centrifugal pump systems are employed in the semiconductor, pharmaceutical and medical industries due to their facility for pumping high purity fluids without particle contamination. Two types of forces have to be generated by the stator units, namely bearing forces for achieving magnetic levitation, and drive forces for producing the needed pump torque. The generation of these forces requires bearing and drive windings, which can be realized as separate bearing and drive coils or as identical, combined coils on the stator claws. In this paper, a detailed comparison between these two winding concepts is undertaken, whereby the copper losses, the power electronics losses, and the achievable pump output pressure are evaluated for both concepts. For each criterion a ratio of improvement is calculated analytically which allows evaluation of the performance of the two winding concepts for any given pump operating point and design. Finally, also practical features such as control complexity, cabling effort and manufacturability are discussed and measurements on prototype systems are carried out to validate the considerations.

• 한국전기전자재료학회논문지
• /
• 제13권9호
• /
• pp.801-804
• /
• 2000

High-temperature superconductor of Bi-2212 system was fabricated by CFP(Centrifugal Forming Process). To make a uniform specimen slurry was prepared in the ratio of 7:3(powder : binder) and ball milled for 24 hours. Milled slurry was charged into a rotating mold with 450 rpm and dried at room temperature. Then the specimen was performed binder burn-out at 35$0^{\circ}C$ and heated for partial melting to 86$0^{\circ}C$. XRD analysis of most specimens were shown 2212 phase and observed a local plate shped microstructure with a well aligned c-axis direction from SEM images. Measured T$_{c}$(Critical temperature) was about 64 K.K.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.3-5
• /
• 1999

This paper deals with the effect on the stress and deformation of the rotor bar of a cage induction motor by the thermal stress, centrifugal force and electromagnetic force. We use both the thermal network method(TNM) and the finite element method(FEM) to analyze the temperature and stress of the rotor.

• 한국주조공학회지
• /
• 제20권3호
• /
• pp.197-207
• /
• 2000

Al-Si alloys were solidified in a rotating cylindrical mold by a vertical centrifugal casting process. Under a certain casting condition, there are four distinct zones such as the chill zone, the primary fine columnar zone, the equiaxed zone, and the secondary coarse columnar zone from the mold wall. The columnar-equiaxed transition (CET) and the equiaxed-columnar transition (ECT) were measured as functions of solute content, flow rate (mold velocity), pouring temperature and mold temperature. Within the critical value of solute content, as the flow rate increases, the columnar-equiaxed transition were found, but not the equiaxed-columnar transition. The aspect ratio of the primary columnar zone was more affected by the solute content than the flow rate. However the aspect ratio of the equiaxed zone was more affected by the flow rate than the solute content. The aspect ratio of the secondary columnar zone was affected by both the flow rate and the solute content.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.517-524
• /
• 2005

An aerodynamic design for centrifugal compressor which was applied to medium speed diesel engine has done. First of all, exact compressor specifications must be defined by accurate engine system matching. This matching program has been developed. Using the mean1ine prediction method, geometric design and performance curve for compressor was done and verified by comparing three dimensional viscous CFD results. The deviation at the design point was about 2.3%. Combustor has been designed and manufactured for the performance test of medium speed diesel engine turbocharger. Fuel nozzle of combustor was designed and performed by PIV and PDPA test equipment. Through these results, spray characteristics were studied and flow coefficient equation was deduced.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1998년도 강연회 및 연구개발 발표회 논문집
• /
• pp.63-72
• /
• 1998

This study Is on the performance prediction and design of sirocco fan. Slip coefficient is very important factor for the performance analysis of centrifugal-type fan. Because generally used slip coefficient equations of backward curved centrifugal fan are not appropriate for forward curved sirocco fan, in this study a proper slip coefficient equation for sirocco fan is suggested. Using this equation performance prediction program for sirocco fan is composed and also included the total noise prediction that include turbulent noise at the fan Inlet and boundary layer noise. A comparison between the values obtained from performance prediction program and experimental values shows that the program predicts the sirocco fan performance in a practical rate.