• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.113-122
• /
• 1998

Stabilization splint therapy Precedes orthodontic intervention to enable the operator to find a 'true' centric(which is stable and comfortable), to test the patient's response to a change in the occlusion, prior to embarking upon a complex course of occlusal therapy : and finally, to see if the centric relation position can be stabilized. For this study, 47 malocclusion Patients enrolled for orthodontic treatment at the Department of Orthodontics, College of Dentistry, Chosun University comprised the malocclusion group, little variation of growth factor by the second molar eruption. They had Cr-Co discrepancy beyond normal range. For each patients the stabilization splint with mutually protected type of occlusal scheme was applied for 3 months. Condylar positions in CR and CO were measured using Penadent articulators, Panadent condylar position indicator(CPI), and transcranial projection before & after stabilization splint therapy. On the basis of this study, the results of this study were as follows 1. In all samples using CPI, there were statistical significances in CR-CO discrepancy(p<0.001) both before 8t after stabilization splint therapy. 2. In Rt and Lt+Rt/2 of superior joint space using transcranial projection, there were statistical significances in CR-CO discrepancy({<0.05) before & after stabilization splint therapy. 3. In supero-inferior components using CPI, there were statistical significances in CR-CO discrepancy(p<0.01) before & after stabilization splint therapy. 4. In all components except Rt using transcranial projection, there were no statistical significances in CR-CO discrepancy(p>0.05) before & after stabilization splint therapy. To sum up, CPI might be more effective than transcranial projection to reveal the changes between CR-CO discrepancies and stabilization splint might be more useful appliance for displaying the vertical changes, than the antero-posterior changes, of condylar position.

• The korean journal of orthodontics
• /
• v.30 no.4 s.81
• /
• pp.491-507
• /
• 2000

The purpose of this study was to investigate if there were a significant differences in mandibular position between cephalometric measurements from a centric occlusion tracing compared to those of a acquired centric relation by stabilization splint on malocclusion patient with TMD. 60 malocclusion patients, who had TMD and CO-CR discrepancy beyond normal range, were selected and subdivided into Class I, II, III by Angle's classification and also subdivided into clockwise, straight downward, and counterclockwise group by Jarabak's posterior facial height/anterior facial height ratio. Lateral cephaolmetric radiographs with the mandible in centric occlusion were taken and measured, and for each Patient the stabilization splint with mutually protected occlusal scheme was applied for minimum 3months. After each patient's CO-CR discrepancy was in normal range, lateral cephalometric radiographs were retaken and measured. The comparison of the difference between CO-CR cephalometric measurements in all sample, Class I, II, III groups, and Clockwise, Straight downward, Counterclockwise groups were studied. The finding of this study can be summarized as follows: 1 In all sample, the value of cephalometric measurements was significantly different between CO-CR. The mandible rotated to down and posterior position and the vertical change was greater than the horizontal change (overjet-1.3mm increase, overbite-1.9mm decrease). 2. In Class II malocclusion group, most of the mean difference value between CO-CR is higher than that of the other groups and more measurements was statically significant. 3. In clockwise and counterclockwise group, some of the mean difference value is higher than that of straight downward group and more measurements was statically significant. 4. There ware no measurements that explain centric relation measurements from the type of malocclusion, facial pattern and centric occlusion measurements. Henceforth, it is strongly recommended that stabilization splint therapy for orthodontic treatment on TMD patient should be excuted upon overall facial types prior to orthodontic diagnosis and treatment planning.

• The korean journal of orthodontics
• /
• v.30 no.1 s.78
• /
• pp.91-99
• /
• 2000

This study was done to identify the changes of bite force and occlusal contact between before and after stabilization splint therapy. 16 female patients, accepted for orthodontic treatment at the Department of Orthodontics, College of Dentistry, Chosun University, were selected as the sample of this investigation. For comparisons, the samples of 16 were divided into just before stabilization splint, 1 month after stabilization splint, 2 months after stabilization splint, and 3 months after stabilization splint and used the T-scan system to identify the bite force and occlusal contact changes for each group. Statistical analysis of the data was carried out ANOVA tests, and Turkey tests using $SPSS/PC^+$. The results were as follows : 1. Bite force change from just before treatment to 1 month after stabilization splint therapy was statistical significantly decreased (P<0.05). 2. Bite force changes from 1 to 3 months after stabilization splint therapy showed no statistical significance (p>0.05). 3. The changes of anterior occlusal contacts showed no statistical significance regardless of the wearing periods of stabilization splint (P>0.05). 4. The changes of posterior occlusal contacts from just before treatment to 1 month after stabilization splint therapy was statistical significantly decreased (P<0.05). 5. The changes of posterior occlusal contacts Outing 1 to 3 months after stabilization splint therapy showed no statistical significance (P>0.05). 6. Posterior teeth rather than anterior teeth were more influenced by the changes of the number of occlusal contacts. To sum up above results, we may respect to capturing and stabilizing centric relation Position just 1 month after stabilization splint therapy.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.2
• /
• pp.57-67
• /
• 2003

Suppose that dental occlusion is related to body posture. We want to find out that improving occlusal balance may affect vibration and distribution of C.O.P. in which way, by measuring change of posture and center of gravity (center of pressure, C.O.P.) which plays important role in measuring balance sensation. Total 11 students at Kyung Hee dental college students, 4 females and 9 males (age: 23-30) participated in this test, who have normal occlusion (Angle's classification I), no TMJ problems. All of the participants have no tooth loss except 3rd molar, no prosthesis over single tooth restoration, no orthopedic problems which affect balance sensation, and no otorhinolaryngological problems. First, we registrated bite by centric relation, and then fabricated stabilization splint that is increased 3.5mm vertical dimension around premolar region. By F-scan (Tekscan Inc., Boston, Mass), we measured discrepancy of average contact pressure of left and right foot. And we also measured discrepancy of vibration of C.O.P(center of pressure). before setting stabilization splint and after wearing stabilization splint at intervals of 1 week, 2 weeks, 3 weeks after. In normal human beings, improved occlusal balance by stabilization splint leads to decrease of vibration of C.O.P. (P<0.05). One week after wearing stabilization splint, vibration of C.O.P. decreased reliably (P<0.05), two weeks after wearing stabilization splint, vibration of C.O.P. decreased similarly comparing to before wearing and one week after wearing. (P<0.05) After two weeks and three weeks, however, it was hard to find reliability. (P>0.05) Difference between average contact pressure of right and left foot also decreased. (P<0.05) We could find decrease after one week of wearing stabilization splint (P<0.05) and two weeks after, the decrease was more reliable than one week after. (P<0.05) After two weeks and three weeks, however, it was hard to find reliability. Improvement of occlusal balance leads to decrease of vibration of C.O.P. and decrease of difference between right and left average contact pressure.

• The korean journal of orthodontics
• /
• v.35 no.3 s.110
• /
• pp.238-249
• /
• 2005

The contemporary two-jaw surgical approach usually involves a Le Fort osteotomy of the maxilla and a ramal osteotomy of the mandible with 3-dimensional repositioning of the jaws as well as the occlusal planes. After making the surgical treatment plan. the surgical movements are duplicated in the model surgery. During this procedure, reference poings and lines are drawn on the base of the models over the dental arch and sawcuts are mads according to these marked osteotomy lines. This technique, however, has been found to be inexact. especially when the laws are moved in several dimensions simultaneously. To overcome this. different methods have been developed for an accurate repositioning of the jaws as planned. A new appliance. Surgical Jaw Relater, has been devised by th8 author for the simple 3-dimensional relocation of the upper and lower models, resulting in the easy construction of the splints such as centric relation splint, intermediate and final splint. This article describes an introduction and a clinical application of this appliance. Through the application of this system to the orthognathic cases including two-law surgery. it is proved that the row device is very clinically useful.

• Journal of Oral Medicine and Pain
• /
• v.20 no.2
• /
• pp.407-420
• /
• 1995

This study was performed to evaluate and compare conservative treatment results by several parameters such as age, sex, symptom duration, type and timing of joint sound, parafunctional habits, splint type, and diagnostic classification. There have been too many articles reporting long term results of conservative treatment but articles related to comparison of treatment results by patients' self-evaluation have been rarely reported. For this study 258 patients with temporomandibular disorders(TMDs) were selected and examined by routine diagnostic procedure for TMDs. The subjects were classified into 5 TMDs subgroups ad treated with conservative treatments involving splints, physical modalities, jaw exercises, and counseling. Visual analogue scale(VAS) about pain, joint sound, and mouth opening limitation was recorded respectively during treatment period. From the VAS data and treatment duration, VAS treatment index(VAS Ti) was calculated. The obtained results were as follows : 1. Pain was the most frequent main symptom in subjects with temporomandibular disorders, and main symptom for mouth opening limitation was comparatively less than for pain or sound in disk displacement with reduction group or in degenerative joint disease group. 2. Degenerative joint disease group had the most poor treatment results and highest occlusal index of Helkim's index. 3. Good prognosis for conservative treatment was observed in acute group, under 6 months than chronic group, 6months over in symptom duration, and subjects with 40 years over in age showed the most poor prognosis. 4. Subjects treated with anterior repositioning splint had better treatment results than subjects treated with centric relation splint, but statistical significance in VAS Ti and treatment duration was not observed. 5. Treatment results according to affected side, types and point of joint sound did not show consistent statistical results. 6. The result for conservative treatment was observed poor in subjects with bruxism and clenching. 7. In studying coincidence between preferred chewing and affected side, frequency of preferred chewing side, in unilateral affection, was higher in ipsilateral than in contralateral side.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.3
• /
• pp.313-317
• /
• 2002

Asymmetry in the face and dentition is a naturally occurring phenomenon. Functional asymmetry can result the mandible being deflected laterally if occlusal interferences prevent proper intercuspation in centric relation. Five year old girl was referred to the pediatric department for mandibular deviation. The patient had right posterior crossbite and 2.5mm midline deviation due to dental caries on the primary teeth. The authors used the activator as occlusal splint for eliminating habitual posturing and deprogramming the musculature in the treatment of functional asymmetry and for occlusal stabilization restored the primary molars with cast crowns.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.1
• /
• pp.72-81
• /
• 2024

To rehabilitate a patient with inappropriate occlusion due to posterior support loss, it is necessary to achieve an appropriate occlusal vertical dimension and create prostheses that demonstrate stable occlusion at the centric relation for full mouth restoration. This case shows full mouth rehabilitation in a patient with missing posterior teeth and tooth wear, achieved through implant-supported prostheses and zirconia full-veneer crowns. To assess adaptation to the increased occlusal vertical dimension, an occlusal splint and temporary restorations were secured. By fabricating the definitive restorations based on the anterior guidance of the temporary restorations, stable occlusal rehabilitation was successfully achieved.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.3
• /
• pp.169-183
• /
• 2003

According to our recent investigation that the increase in the occlusal vertical dimension made the appendage muscle strength got higher, the occlusal appliances were made by increasing the occlusal vertical dimension "from the centric relation" position of the mandible. In this experiment, the authors tried to study the change in the appendage muscle strength due to increase in occlusal vertical dimension from intercuspal position(ICP) of mandible with the same subjects and manner as the former experiment. For this study, ten male athletes in a mean age of 23 year who were joined the former study were selected. All the subjects had a complete or almost complete set of natural teeth and reported no subjective symptoms of temporomandibular disorders. Upper and lower casts were mounted on the semi-adjustable articulator at the intercuspal position and a point was marked on the attached gingival area between the right canine and the right 1st. premolar in each upper and lower cast. From the points, the occlusal vertical dimension was increased by 2mm, 3.5mm and 5mm, and then each 10 maxillary type occlusal splint at each 3-increased position were fabricated with heat curing clear acrylic resin. Including the intercuspal position, the 3 kinds of occlusal splints were placed on the subjects individually, and then isokinetic muscle strength on 7 parts of the human appendage which are shoulder, knee, ankle, wrist, forearm, elbow and hip was measured with the CYBEX 6000 SYSTEM (Lumex, NewYork, USA). The results were as follows: The highest mean value in muscular strength was shown at the position of 2mm-increased vertical dimension. The muscle strength during internal/external rotation of shoulder and knee, plantarflexion of ankle, flexion of elbow, and flexion and extension of hip at the increased occlusal vertical dimension position were significantly higher than them at the intercuspal position (p<0.05). Only in view of the increase in the appendage muscle strength, regardless of the way of making the occlusal splints by elevating the occlusal vertical dimension from the centric relation position or intercuspal position, the occlusal splints had an effect on the increase of isokinetic muscle strength at the occlusal vertical dimension which increased within the proper range on the habitual arc of closure.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.2
• /
• pp.121-129
• /
• 2020

From the point of view of oral rehabilitation, the treatment of extensive tooth wear requires a prosthetic approach. Physiological tooth wear is considered as a normal process and generally does not require treatment, but excessive tooth wear causes problems like inadequate occlusion and esthetics. Changes of occlusal vertical dimension should be made through accurate diagnosis and analysis. Also, the patient's adaptation to the changed occlusal vertical dimension should be assessed over time. This case was a 60-year-old male patient who complained of a decrease in chewing function and esthetics due to severe tooth wear. Full-mouth rehabilitation was performed with a tooth supported fixed prosthesis. An occlusal stabilization splint and provisional restoration were used to evaluate the adaptation to increased occlusal vertical dimension and induce a stable centric relation position. After that, monolithic zirconia prosthesis was delivered. We report this as a satisfactory functional recovery and esthetics.