• Structural Engineering and Mechanics
• /
• v.21 no.5
• /
• pp.507-518
• /
• 2005

In the shear-lag analysis of structures deterministic procedure is insufficient to provide complete information. Probabilistic analysis is a holistic approach for analyzing shear-lag effects considering uncertainties in structural parameters. This paper proposes an efficient and accurate algorithm to analyze shear-lag effects of structures with parameter uncertainties. The proposed algorithm integrated the advantages of the response surface method (RSM), finite element method (FEM) and Monte Carlo simulation (MCS). Uncertainties in the structural parameters can be taken into account in this algorithm. The algorithm is verified using independently generated finite element data. The proposed algorithm is then used to analyze the shear-lag effects of a simply supported beam with parameter uncertainties. The results show that the proposed algorithm based on the central composite design is the most promising one in view of its accuracy and efficiency. Finally, a parametric study was conducted to investigate the effect of each of the random variables on the statistical moment of structural stress response.

• Computers and Concrete
• /
• v.12 no.4
• /
• pp.537-552
• /
• 2013

Computation of flexural ductility of reinforced concrete beam sections has been proposed by taking into account strain rate sensitive constitutive behavior of concrete and steel, confinement of core concrete and degradation of cover concrete during load reversal under earthquake loading. The estimate of flexural ductility of reinforced concrete rectangular sections has been made for a wide range of tension and compression steel ratios for confined and unconfined concrete at a strain rate varying from $3.3{\times}10^{-5}$ to 1.0/sec encountered during normal and earthquake loading. The parametric studies indicated that flexural ductility factor decreases at increasing strain rates. Percentage decrease is more for a richer mix concrete with the similar reinforcement. The confinement effect has marked influence on flexural ductility and increase in ductility is more than twice for confined concrete (0.6 percent volumetric ratio of transverse steel) compared to unconfined concrete. The provisions in various codes for achieving ductility in moment resisting frames have been discussed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.5
• /
• pp.920-938
• /
• 2015

In the present study, a numerical prediction method on the hydrodynamic interaction force and moment between two ships in shallow and restricted waterway is presented. Especially, the present study proposes a methodology to overcome the limitation of the two dimensional perturbation method which is related to the moored-passing ship interaction. The validation study was performed and compared with the experiment, firstly. Afterward, in order to propose a methodology in terms with the moored-passing ship interaction, further studies were performed for the moored-passing ship case with a Reynolds Averaged Navier-Stokes (RANS) calculation which is using OpenFOAM with Arbitrary Coupled Mesh Interface (ACMI) technique and compared with the experiment result. Finally, the present study proposes a guide to apply the two dimensional perturbation method to the moored-passing ship interaction. In addition, it presents a possibility that the RANS calculation with ACMI can applied to the ship-ship interaction without using a overset moving grid technique.

• ETRI Journal
• /
• v.40 no.5
• /
• pp.653-663
• /
• 2018

Patients with spinal cord injuries cannot move their limbs using their intact muscles. A suitable controller can be used to move their arms by employing the functional electrical stimulation method. In this article, a fuzzy exponential sliding-mode controller is designed to move a musculoskeletal human arm model to track an optimal trajectory in the sagittal plane. This optimal arm trajectory is obtained by developing a policy for the central nervous system. In order to specify the optimal trajectory between two points, two dynamic and static optimal criteria are applied simultaneously. The first dynamic objective function is defined to minimize the joint torques, and the second static optimization is offered to minimize the muscle forces at each moment. In addition, fuzzy logic is used to tune the sliding-surface parameter to enable an appropriate tracking performance. Simulation results are evaluated and compared with experimental data for upward and downward movements of the human arm.

• International Journal of Reliability and Applications
• /
• v.3 no.1
• /
• pp.17-23
• /
• 2002

The class of “new better than used of a specified age” is a large and practical class of life distributions. Its properties, applicability, and testing was discussed by Hollander, Park and Proschan (1986). Their test, while remaining the yardstick for this class, suffers from weak efficiency and weak power, especially for specified ages below the average age. Thus, it is beneficial to have an alternative testing procedure that would work better for early ages and still work well for later ages. This is exactly the subject of the current note. The test developed here is also simpler than that of Hollander, et. al. (1986).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.8
• /
• pp.777-782
• /
• 2002

The range profile is easily obtainable and promising feature vector in the aspect of real-time radar target recognition system. However, the range profile is highly dependent on a aspect angle of a target and this dependence make it difficult the recognition over wide-angular region. In this paper, we propose the classifier with subclass concept in order to solve this dependence problem. Recognition results using six aircraft models measured at compact range facility are presented to show the effectiveness of this proposed classifier over wide-angular region.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.225-232
• /
• 2006

Three building structures haying piloti frames in the lower two stories were selected as prototypes and were analyzed using nonlinear static analysis to investigate the seismic capacity of these buildings. The first one has a symmetrical moment resisting frame (Model 1), the second has an infilled shear wall in the central frame (Model 2), and the third has an infilled shear wall only in one of exterior frames (Model 3), The analytical results were compared with those of shaking table tests with regards to the overstrength and ductility of the irregular buildings. Infilled shear wall in Model 2 and Model 3 induced large overstrength factors, 6.8 and 6.0, respectively, which are about two times larger than that of Model 1, 3.5. The displacement ductility ratio in Model 2 was only 2.5, due to the shear failure of wall in the piloti stories, whereas those of Model 1 and Model 3 reached 3.2.

• International Journal of Computer Science & Network Security
• /
• v.21 no.11
• /
• pp.266-270
• /
• 2021

The article clarifies and divorces the concepts of distance learning systems "distance learning", "distance education", "distance technologies", "open education". The central concept of the DO system is "distance learning"; - an assessment of the use of distance technologies in the system of higher professional education in Ukraine was carried out, which showed that the dominant teaching technology at the moment is the technology of teaching using cases (case technology on paper and electronic media). It is determined that distance technologies based on the active use of technical teaching aids (network technologies, telecommunication technologies) find little use in the system of higher professional education in Ukraine.

• Wind and Structures
• /
• v.32 no.4
• /
• pp.341-354
• /
• 2021

Articulated towers are one of the class of compliant offshore structures that freely oscillates with wind and waves, as they are designed to have low natural frequency than ocean waves. The present study deals with the dynamic response of a double-pendulum articulated tower under hydrodynamic and aerodynamic loads. The wind field is simulated by two approaches, namely, single-point and multiple-point. Nonlinearities such as instantaneous tower orientation, variable added mass, fluctuating buoyancy, and geometrical nonlinearities are duly considered in the analysis. Hamilton's principle is used to derive the nonlinear equations of motion (EOM). The EOM is solved in the time domain by using the Wilson-θ method. The maximum, minimum, mean, and standard deviation and salient power spectral density functions (PSDF) of deck displacement, bending moment, and central hinge shear are drawn for high and moderate sea states. The outcome of the analyses shows that tower response under multiple-point wind-field simulation results in lower responses when compared to that of single-point simulation.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.79-84
• /
• 2022

Towards the sixth generation (6G) mobile networks, spectrum and energy efficiency of non-orthogonal multiple access (NOMA) transmissions in the fifth generation (5G) wireless system have been improved by intelligent reflecting surface (IRS) technologies. However, the reflecting devices of an IRS tend to be correlated because they are placed close on the surface each other. In this paper, we present an analysis on the correlated IRS in NOMA cellular networks. Specifically, we consider the bit-error rate (BER) performances for correlated-IRS in NOMA networks. First, based on the central limit theorem, we derive an approximate analytical expression of the BER for correlated-IRS NOMA systems, by using the second moment of the channel gain. Then we validate the proposed analytical BER by Monte Carlo simulations, and show that they are in good agreement. In addition, we also show numerically the BER improvement of the correlated-IRS NOMA over the conventional independent-IRS NOMA.