• 한국컴퓨터정보학회논문지
• /
• 제18권8호
• /
• pp.95-104
• /
• 2013

2009년 77DDoS 대란 이후 DDoS 공격은 사회적 위협으로 발전하고 있다. 이러한 위협에 대응하기 위해 다양한 DDoS방어기법이 연구되고 있으나, DDoS 공격기법 또한 더욱 정교해지고 있다. DDoS 공격의 형태는 과거 네트워크계층의 대용량 트래픽 공격에서 최근에는 애플리케이션 계층의 소량의 정교한 형태(Slow DDoS Attack)로 변하고 있으며 공격을 위한 공격에이전트 또한 더욱 지능화 되고 정상 PC와 구분이 모호하여 차단이 더욱 어렵게 되고 있다. 정상PC와 지능화된 공격에이전트 구분을 위해 최근 사용되는 사용자인증시스템(CAPTCHA)의 경우 인증과정에서 사용자의 개입이 필요하며, 특히 NAT 환경에서 IP 기반 차단 방법은 정상사용자의 트래픽까지 동시 차단될 수 있다. 본 논문에서는 HTTP 프로토콜에서 사용하는 쿠키를 활용한 일회성 세션 키 기반 인증방법을 적용하여 공격 에이전트와 정상 PC를 구분, HTTP DDoS 공격을 효과적으로 차단하기 위한 방어기법을 제안한다.

• Advances in nano research
• /
• 제15권3호
• /
• pp.263-275
• /
• 2023

The electron transport properties of Y-type zigzag branched carbon nanotubes (CNTs) are of great significance for micro and nano carbon-based electronic devices and their interconnection. Based on the semi-empirical method combining tight-binding density functional theory and non-equilibrium Green's function, the electron transport properties between the branches of Y-type zigzag branched CNT are studied. The results show that the drain-source current of semiconducting Y-type zigzag branched CNT (8, 0)-(4, 0)-(4, 0) is cut-off and not affected by the gate voltage in a bias voltage range [-0.5 V, 0.5 V]. The current presents a nonlinear change in a bias voltage range [-1.5 V, -0.5 V] and [0.5 V, 1.5 V]. The tangent slope of the current-voltage curve can be changed by the gate voltage to realize the regulation of the current. The regulation effect under negative bias voltage is more significant. For the larger diameter semiconducting Y-type zigzag branched CNT (10, 0)-(5, 0)-(5, 0), only the value of drain-source current increases due to the larger diameter. For metallic Y-type zigzag branched CNT (12, 0)-(6, 0)-(6, 0), the drain-source current presents a linear change in a bias voltage range [-1.5 V, 1.5 V] and is symmetrical about (0, 0). The slope of current-voltage line can be changed by the gate voltage to realize the regulation of the current. For three kinds of Y-type zigzag branched CNT with different diameters and different conductivity, the current-voltage curve trend changes from decline to rise when the branch of drain-source is exchanged. The current regulation effect of semiconducting Y-type zigzag branched CNT under negative bias voltage is also more significant.

• 한국재료학회지
• /
• 제20권11호
• /
• pp.559-569
• /
• 2010

The liquid-phase sintering method was used to prepare a glass lens forming core composed of SiC-$Al_2O_3-Y_2O_3$. Spark plasma sintering was used to obtain dense sintered bodies. The sintering characteristics of different SiC sources and compositions of additives were studied. Results revealed that, owing to its initial larger surface area, $\alpha$-SiC offers sinterability that is superior to that of $\beta$-SiC. A maximum density of $3.32\;g/cm^3$ (theoretical density [TD] of 99.7%) was obtained in $\alpha$-SiC-10 wt% ($6Al_2O_3-4Y_2O_3$) sintered at $1850^{\circ}C$ without high-energy ball milling. The maximum hardness and compression stress of the sintered body reached 2870 Hv and 1110 MPa, respectively. The optimum ultra-precision machining parameters were a grinding speed of 1243 m/min, work spindle rotation rate of 100 rpm, feed rate of 0.5 mm/min, and depth of cut of $0.2\;{\mu}m$. The surface roughnesses of the thus prepared final products were Ra = 4.3 nm and Rt = 55.3 nm for the aspheric lens forming core and Ra = 4.4 nm and Rt = 41.9 for the spherical lens forming core. These values were found to be sufficiently low, and the cores showed good compatibility between SiC and the diamond-like carbon (DLC) coating material. Thus, these glass lens forming cores have great potential for application in the lens industry.

• Safety and Health at Work
• /
• 제11권3호
• /
• pp.301-306
• /
• 2020

Background: The Functional Movement Screen (FMS^TM) is a screening tool used to assess an individual's ability to perform fundamental movements that are necessary to do physically active tasks. The purpose of this study was to assess the ability of FMS to predict occupational injury among Denver Fire Department firefighters. Method: FMS tests were administered from 2012 to 2016. Claim status was defined as any claim occurrence vs. no claim and an overexertion vs. no claim/other claim within 1 year of the FMS. To assess associations between FMS score and claim status, FMS scores were dichotomized into ≤ 14 and > 14. Age-adjusted odds ratios were calculated using logistic regression. Sensitivities and specificities of FMS predicting claims at various FMS score cut points, ranging from 10 to 20 were tested. Results: Of 581 firefighters (mean ± SD, age 38 ± 9.8 y) who completed FMS between February 2015 and March 2018, 188 (32.4%) filed a WC claim in the study time frame. Seventy-two of those (38.3%) were categorized as overexertion claims. There was no association between FMS score and claim status [odds ratio (OR) = 1.27, 95% confidence interval (CI): 0.88 - 1.83] and overexertion claim vs. no claim/other claim (OR = 1.33, 95% CI: 0.81 - 2.21). There was no optimal cutoff for FMS in predicting a WC claim. Conclusions: Although the FMS has been predictive of injuries in other populations, among this sample of firefighters, it was not predictive of a future WC claim.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.821-832
• /
• 2011

Recently, the noise of vehicle is the one of the key factors for customers to purchase a vehicle and the most important part which is related to the noise is the exhaust system. Thus, car makers have their own ways to assess this exhaust noise not only to decrease the level of noise but to enhance the feeling of it. Typically, to do these things in the early stage of development, the tuning code of the exhaust system has to be made by CAE tool, which is very reliable but expensive, and the prototype parts of this code would be made for the validation test. Then this process can be iterated to meet the target of the performance. In this study, a new algorithm which adapts the '3 dimensional convective sound wave theory 'and 'Doppler effect' has been developed. With this new algorithm, a brand new system for the calculation of tail pipe noise has been developed and validated by acoustic wind tunnel test. As a result of this study, various comparisons and have been carried out, for example, the comparison with other CAE tool has been performed for the validity and the improvement of the new calculation code could be achieved.

• 한국운동역학회지
• /
• 제26권4호
• /
• pp.333-341
• /
• 2016

Objective: The purpose of this study was to assess the consistency of the gliding and push-off motion for single leg skating from the first to fourteenth steps. We hypothesized that: 1) there would be no difference in stroke trajectory, step rate, and cycle rate between the left and right steps of gliding; and 2) there would be a difference in the resultant velocity of toe push-off and the horizontal velocity of the center of mass after six step push-offs. Method: The study included five male 500-m speed skaters (mean height, $1.80{\pm}0.02m$; mean weight, $76.8{\pm}3.96kg$; record, $35.83{\pm}0.30sec$; 100-m record, <9.97 sec). Data were collected from the first to fourteenth steps (40 m) and recorded using five digital JVC GR-HD1KR video cameras (Victor Co., Japan) operating at a sampling frequency of 60 fields/sec and shutter speed of 1/500 sec. For each film frame, the joint positions were digitized using the KWON3D motion analyzer. Position data were filtered with low-pass Butterworth $4^{th}$ order at the cut-off frequency of 7.4 Hz. Results: The right toe of the skating trajectories at $2^{nd}$, $5^{th}$, and $7^{th}$ strokes differed from those of the left toe. The angles of the right and left knee demonstrated unbalanced patterns from the flexion and extension legs. The step and cycle rates of the right and left leg differed from the start until 20 m. The resultant velocities of the toe at the push-off phase and of the body mass center diverged before the six push-offs. Conclusion: This study's findings indicate that the toe of skating trajectory on left and right sliding after push-off should maintain a symmetrical trajectory. The resultant velocity of toe push-off and horizontal velocity from the center of body need to be separated after about six step push-offs.

• 한국의상디자인학회지
• /
• 제22권4호
• /
• pp.1-16
• /
• 2020

This study focused on front-blouse-type skirts from the 15th and 16th centuries and aimed to investigate their formative characteristics and wearing patterns. Previous studies, literature, records, paintings, and excavated clothing items were used as research materials. The researcher categorized front-blouse-type skirts into three types based on the construction method. The first has the front-center portion of the skirt folded up, the second has the center portion cut short, and the third has horizontal dart pleats on either side. An examination of 48 items from 18 excavation sites of front-blouse-type skirts showed that only the front-center portion folded up type appeared in the 15th century, and it was only in the 16th century that the other forms of skirts were worn. Finally, based on the analysis, the pattern of wearing front-blouse-type skirts and their changing factors was deduced. Front-blouse-type skirts were identified as ceremonial skirts that were popular in the 15th and 16th centuries among the types of long skirts available. The popularity and usage of this type of skirt began to spread gradually in the 15th century. In the 16th century, various types of front-blouse-type skirts were brought into vogue by the royal family and the external register. It can be inferred that the popularity of front-blouse-type skirts gradually declined in the 17th century as other types of long skirts, folding skirts, and Sran type skirts emerged.

• Journal of Chest Surgery
• /
• 제24권1호
• /
• pp.54-63
• /
• 1991

Post-thoracotomy pain is so severe that lead to postoperative complications, such as sputum retention, segmental or lobar atelectasis, pneumonia, hypoxia, respiratory failure due to the patient`s inability to cough, deep breathing and movement. Many authors have been trying to reduce the post-thoracotomy pain, but there is no method of complete satisfaction. In 1974, Nelson and associates introduced the intercostal nerve block using the cryoprobe. The application of cold directly to the nerves causes localized destruction of the axons while preserving the endoneurium and connective tissue, thereby introducing a temporary pain block and able to complete regeneration of intercostal nerves. One hundred and two patients, who undergoing axillary or posterolateral thoracotomy at the Department of Thoracic and Cardiovascular Surgery in Korea University Medical Center between April 1990 and August 1990, were evaluated the effects of cryoanalgesia for the post-thoracotomy pain reduction. The patients were divided into two groups: Group A, control, the patients without the cryoanalgesia[No.=50], Group B, trial, the patients with cryoanalgesia[No.=52]. Before the thorax closed, in the group A, local anesthetics, 2% lidocaine 3cc, were injected to the intercostal nerves[one level with the thoracotomy, one cranial and caudal intercostal level and level of drainage tube insertion]. In the group B, cryoprobe was directly applied for 1 minute at the same level. Postoperative analgesic effects were evaluated by the scoring system which made arbitrary by author: The pain score 0 to 4, The limitation of motion score 0 to 3, The analgesics consumption score 0 to 3, The total score, the sum of above score, 0 to 10. For the evaluation of immediate analgesic effects, the score were evaluated at the operative day, the first postoperative day, the second postoperative day, and the seventh postoperative day. The effects of incision type, and rib cut to the post-thoracotomy pain were also evaluated. The results were as follows; 1. The intercostal block with cryoanalgesia reduced the immediate postoperative pain significantly compare with control group. 2. The intercostal block with cryoanalgesia improved the motion of the operation side significantly compare with control group. 3. The intercostal block with cryoanalgesia reduced the analgesics requirements at the immediate postoperative periods significantly. 4. The intercostal block with cryoanalgesia lowered the total score significantly compare with control group. 5. The intercostal block with cryoanalgesia were more effective to the mid-axillary incision than to the posterolateral incision 6. The intercostal block with cryoanalgesia were more effective to the patients without rib cut than to the patients with rib cut. 7. No specific complication need to be treated were not occurred during follow-up.

• 전자공학회논문지CI
• /
• 제42권6호
• /
• pp.93-100
• /
• 2005

본 논문에서는 3차원 형상 재구성을 위하여 기존 복셀 칼라링 기법의 색상 일관성에 대한 문턱값 문제를 해결하기 위한 새로운 복셀 칼라링 기법을 제안하였다. 제안 기법에서는 중심카메라의 광선분위에 있는 내부 복셀의 색상 일광성을 비교함으로써 최적의 문턱값을 결정하였다. 즉, 표면 복셀에 대한 색상 일관성과 내부 복셀의 색상 일관성 값을 비교함으로써 표면 복셀에 대한 최적의 문턱값을 찾아가도록 하였다. 또한 그래프 절단 기법을 적용하여 주위 복셀을 제거함으로써 표면 잡음을 감소시켰다. 제안된 방법은 기존의 알고리듬보다 빠르고 정확하게 3차원형상을 재구성 할 수 있었다.

• 식물병연구
• /
• 제20권4호
• /
• pp.245-252
• /
• 2014

본 실험은 Fusarium oxysporum f. sp. cucumerinum에 의해 발생하는 오이 덩굴쪼김병의 효율적인 저항성 검정 방법을 확립하기 위하여 수행되었다. ITS와 TEF 유전자 염기서열 분석과 멜론, 참외, 오이 및 수박을 포함한 박과 작물에 대한 기주 특이성 분석을 통해 KR5 균주를 F. oxysporum f. sp. cucumerinum으로 동정하였다. 그리고 덩굴쪼김병균 KR5에 저항성 정도가 다른 오이 네 품종과 오이용 대목 두 품종을 선발하여 유묘의 생육 시기, 뿌리 상처, 접종원 농도 및 접종 후 재배 온도에 따라 이들 여섯 품종의 덩굴쪼김병 발생을 조사하였다. 저항성 품종의 덩굴쪼김병 발병도는 접종 후 재배 온도에 따라 차이를 나타냈으며, 저항성 품종들은 접종 후에 $20^{\circ}C$보다 $25^{\circ}C$나 $30^{\circ}C$에서 재배하였을 때 높은 저항성을 보였다. 그리고 유묘의 생육 시기 중 파종 후 7일된 유묘에 덩굴쪼김병균을 접종하였을 때 가장 큰 저항성과 감수성 차이를 나타내었다. 이상의 결과로부터 오이 덩굴쪼김병에 대한 저항성을 효과적으로 검정하는 방법으로 파종하고 7일 동안 재배한 유묘의 뿌리로부터 흙을 제거하고, 이들을 $1.0{\times}10^6-1.0{\times}10^7$ conidia/ml 농도의 F. oxysporum f. sp. cucumerinum 포자현탁액에 침지하여 접종한 후에 건전한 원예용 상토에 이식하고 $25^{\circ}C$ 생육상에서 3주간 재배하는 방법을 제안한다.