• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.494-501
• /
• 2013

PURPOSE. The purpose of this study was to provide an actual guideline in determining the shape, diameter, and position of the implant in immediate implantation by the measurement of the thickness of facial and palatal plate, the thickness of cortical bone on the facial and palatal plate, the diameter of the root, and the distance between the roots in the cadavers. MATERIALS AND METHODS. The horizontal sections of 20 maxillae were measured and analyzed to obtain the average values. Resin blocks were produced and cut serially at 1 mm intervals from the cervical line to the root apex. Images of each section were obtained and the following measurements were performed: The thickness of the facial and palatal residual bone at each root surface, the thickness of the facial and palatal cortical bone at the interdental region, the diameter of all roots of each section on the faciopalatal and mesiodistal diameter, and the interroot distance. Three specimens with measurements close to the average values were chosen and 3-dimensional images were reconstructed. RESULTS. The thickness of the facial and palatal cortical bone at the interdental region in the maxilla, the buccal cortical bone was thicker in the posterior region compared to the anterior region. The interroot distance of the alveolar bone thickness between the roots increased from anterior to posterior region and from coronal to apical in the maxilla. CONCLUSION. In this study, the limited results of the morphometric analysis of the alveolar ridge using the sections of maxilla in the cadavers may offer the useful information when planning and selecting optimal implant for immediate implantation in the maxilla.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.703-706
• /
• 2009

The external electrode fluorescent lamp(EEFL) has recently been applied to backlight of LCD TV as a new light source. The dependence of the electro-optic characteristics of the EEFL used in direct-lit backlights on the glass thickness was examined in detail, and the ultraviolet(UV)-light efficiency was estimated. It was found that the lamp efficiency became larger as the glass thickness decreased if other conditions were the same.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.549-550
• /
• 2006

It has become topic continuously at MEMS or semiconductor process to form three-dimensional multilayer structure. In this paper, we devised the new polymer pattern method that has multilayer structure. This is method that uses different kind of polymeric material. Specially, polymers used in this study that we propose became all pattern by photolithography, prevented that process increases. Here, polymer that we use used polymer of epoxy order called "SU-8" and polymer of novolak resin called "AZ-1518". The result, "SU-8" was formed pattern to 3.5um thickness, and "AZ-1518" about pattern 3um thickness. Also, It was been 6um thickness at same pattern area.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1313-1316
• /
• 2005

In the present paper, it was investigated that adhesion layer on gate insulator could affect the electrical characteristics for the organic thin film transistors (OTFTs). The polyimide (PI) as organic adhesion layer was fabricated by using the vapor deposition polymerization (VDP) processing . It was found that electrical characteristics improved comparing OTFTs using adhesion layer to another. We researched adhesion layer as a function of thickness. For inverted-staggered top contact structure, field effect mobility, threshold voltage, and on-off current ratio of OTFTs using adhesion layer of PI 15 nm thickness on the gate insulator with a thickness of 0.2 ${\mu}m$ were about 0.5 $cm^2/Vs$, -0.8 V, and $10^6$, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.6
• /
• pp.723-726
• /
• 1996

A water loaded pressure device using water as the breaking force was developed to evaluate eggshell strength and compared with a dropping ball techniques. Further, relationships of shell thickness and weight of eggs to shell strength were also studied. Values for both of the shell strength measuring methods showed a highly significant correlation (p < 0.001) with shell thickness. The water loaded pressure method had a much higher simple correlation coefficient for shell thickness (r = + 0.786) than the dropping ball method (r = + 0.577). The shell strength measured by the water loaded pressure method appeared not to be correlated to egg weight. On the other hand, the negative sign of the standard partial regression coefficient and the partial regression coefficient of egg weight in the estimated multiple regression equation implied that for a given shell thickness a larger egg tended to have less shell strength than a smaller egg.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.113-116
• /
• 2008

The active layer thickness and curing condition dependent performance of an organic thin film transistor (OTFT) with inkjetted organic semiconductor (OSC) layer is studied The best performance of the OTFT was found when the thickness of ose was ~120 nm cured at $60^{\circ}C$. The performance enhancement of the OTFT with inkjetted OSC layer was discussed by comparing the OTFT with spin-coated ose layer.

• Journal of Magnetics
• /
• v.14 no.4
• /
• pp.155-160
• /
• 2009

This study examined the effects of a decrease in thickness of magnetic alloy flakes on the electromagnetic wave absorption characteristics of nanocrystalline $Fe_{73.5}Cu_1Nb_3Si_{15.5}B_7$ (at.%) alloy flakes/polymer composite sheets available for a quasi-microwave band. The thickness of FeCuNbSiB alloy flakes decreased to 1-2 $\mu$m with increasing milling time up to 24 h, and the composite sheet including alloy flakes milled for 24 h exhibited considerably enhanced power loss properties in the GHz range compared to the sheets having non-milled alloy powders. Although a considerable increase in loss factor upon milling was observed in the narrow frequency range of 4-6 GHz, there was no correlation between the complex permeability and flake thickness. However, the complex permittivity increased with increasing milling time, and there was good agreement between the milling time and the frequency dependences of the complex permittivity and power loss.

• Journal of Hydrogen and New Energy
• /
• v.28 no.6
• /
• pp.663-668
• /
• 2017

SOFC anode fabricated core-shell using machano-fusion method using core with submicron size Ni, nano size YSZ for shell. Using prepared core-shell, depending on the thickness of the shell, we studied how the characteristics of sintering and SOFC cell change by sintering the anode. The Ni-YSZ core-shell has a Ni core of 0.5 to $1.2{\mu}m$ over 2 to 7 YSZ of 15 to 20 nm is, and as the high speed mixing time increases, the YSZ number increases and the shell thickness becomes uniform increased. When the fuel electrode is manufactured with core-shell, it has superior sintering property, has grain of uniform size compared with the one synthesized by general mixing, the falling path is short, the conductors (electrons and ions) connection is excellent, the electrical conductivity has become excellent. The thicker the shell, the lower the electrical conductivity. When the thickness of shell ranged from 46 to 139 nm and 61 to 81 nm, the performance was the highest and the ASR was the smallest.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1255-1257
• /
• 2003

This study proposes a single-channel satellite remote sensing algorithm for retrieving aerosol optical thickness over global ocean using FY-1C/1D data. An efficient lookup table (LUT)method is adopted in this algorithm to generate apparent reflectance in channel 1 and channel 2 of FY-1C/1D over ocean. The algorithm scale the apparent reflectance in cloud-free conditions to aerosol optical thickness using a state-of-art radiative transfer model 6S with input of the relative spectral response of channel 1 and 2 of FY-1C/1D. Monthly mean composite maps of the aerosol optical thickness have been obtained from FY-1C/1D global area coverage data between 2001 and 2003. Aerosol optical thickness maps can show the major aerosol source which are located off the west coast of northern and southern Africa, Arabian Sea and India Ocean. These result is very similar to other satellite sensors such as AVHRR and MODIS in the location area of heavy aerosol optical thickness over global ocean. The algorithm have been used to FY-1D operational performance and it is the first operational aerosol remote sensing product in China.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.5
• /
• pp.363-368
• /
• 1999

Ultrasonic pulse-echo methods measuring the transit time through specimens have been widely used in determination of ultrasonic velocity and thickness of specimens. Usually, to determine the velocity of the ultrasonic. the transit time of the ultrasonic pulse through specimen is measured by using the ultrasonic measuring equipment such as the oscilloscope including ultrasonic pulser/receiver and the thickness of the specimen is measured by using the length measuring instrument such as micrometer or vernier calipers etc., i. e. each parameter is measured by using each measuring method. In the case of the measuring the thickness of a specimen by using the ultrasonics. the ultrasonic equipments, which measure the thickness, such as the ultrasonic thickness gauge must be calibrated by using the reference block of which the ultrasonic velocity is known beforehand. In the present work, we proposed a new method for simultaneous measurement of ultrasonic velocity and thickness without reference blocks. Experimental results for several specimens show that proposed method have good agreements with those by traditional ultrasonic method.