• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.199-214
• /
• 2022

The Yeongnam Massif is one of representative basement provinces in the Korean Peninsula, which has experienced high-temperature, low-pressure (HTLP) regional metamorphism and partial melting. Here we reviewed recent developments in Paleoproterozoic (1.87-1.84 Ga) hot orogenesis of the Yeongnam Massif, typified by the granulite-facies metamorphism and partial melting recorded in the HTLP rocks. In particular, spatiotemporal linkage between the metamorphic and magmatic activities, including the Sancheong-Hadong anorthositic magma as a heat source, provides a key to understand the widespread HTLP metamorphism and partial melting in the Yeongnam Massif. Crustal anatexis, resulting from the fluid-present melting and muscovite/biotite dehydration melting, has yielded various types of leucosomes and leucogranites. Zircon and monazite petrochronology, using in-situ U(-Th)-Pb data from the secondary ion mass spectrometry, indicates that the HTLP metamorphism and anatexis lasted over a period of ~15 Ma at ca. 1870-1854 Ma. In addition, a fluid influx event at ca. 1840 Ma was locally recognized by the occurrence of incipient charnockite. Taken together, the Yeongnam Massif preserves a prolonged evolutionary record of the HTLP metamorphism, partial melting, and fluid influx diagnostic for a hot orogen. Such an orogen is linked to the Paleoproterozoic orogeny widespread in the North China Craton, and most likely represents the final phase of crustal evolution in the Columbia/Nuna supercontinent.

• Analytical Science and Technology
• /
• v.22 no.6
• /
• pp.480-487
• /
• 2009

The herbicide dicamba (2-methoxy-3,6-dichlorobenzoic acid) in soil and plants was determined by gas chromatography-mass spectrometry (GC/MS). The samples were extracted with diethyl ether at pH 2, and washed with 0.1 N HCl, and then dried. The dried residue was derivatized in 1 mL of 10% $H_2SO_4$-MeOH for 2 hr at $80^{\circ}C$. The reaction mixture was neutralized with 4 mL of sodium bicarbonate solution and reextracted with 5 mL of diethyl ether. After the extract was concentrated, dicamba was determined by GC/MS-SIM mode. There was good linearity above 0.999 in the ranges of the $1.0{\sim}100{\mu}g/kg$. Total 42 sample including 32 soil samples and 10 plants samples were analyzed by developed method. Dicamba was detected in the concentration range of $2.9-123.9{\mu}g/kg$ in 15 samples among 32 soil samples and in the concentration range of $43-33,252{\mu}g/kg$ in 5 samples among 10 plants samples. A cause of the wither and die of the pine trees is suspected to spray dicamba around or directly to them.

• Korean Journal of Environmental Biology
• /
• v.42 no.1
• /
• pp.127-134
• /
• 2024

The feathery branched green alga Bryopsis plumosa (Hudson) C. Agardh bloomed at Songji Beach, Haenam, Korea, in November 2022. A terrible stench was present on the beach, and the bottom was covered in a thick green mat of green algae. The alga was identified as B. plumosa, which is an opportunistic species currently distributed worldwide. Dissolved inorganic nitrogen (DIN) and dissolved inorganic phosphorus (DIP) were analyzed in the bloomed area and compared with those of other vicinities. The DIN and DIP concentrations were 1.067 and 0.461 mg L^-1, respectively, which were 6 to 19 times higher than the average concentrations on southwest coasts, including Haenam. The B. plumosa bloom at Songji Beach in November 2022 appears to have depended on DIN and DIP concentrations in seawater. In this study, we report on the mass occurrence of B. plumosa, which appeared for the first time in Korea. This occurrence was found to be closely related to the concentration of nutrients in seawater. Therefore, it is necessary to manage the concentration of nutrients on land flowing into coastal waters to control green algal blooms such as Bryopsis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.3
• /
• pp.1-9
• /
• 2013

This paper presents high-velocity impact analysis of two-way RC slabs, including steel fibers and strengthening with fiber reinforced polymer (FRP) sheets for evaluating impact resistance. The analysis uses the LS-DYNA program, which is advanced in impact analysis. The present analysis was performed similarly to the high-velocity impact tests conducted by VTT, the technical research center of Finland, to verify the analysis results. High-velocity impact loads were applied to $2100{\times}2100{\times}250$ mm size two-way RC slab specimens, using a non-deformable steel projectile of 47.5kg mass and 134.9m/s velocity. In this research, extra impact analysis of material specimens was carried out to verify the material models used to the analysis. The elastic-plastic hydrodynamic model, concrete damage model and orthotropic elastic model were used to simulate the non-linear softening behavior of steel fiber reinforced concrete (SFRC), and material properties of normal concrete and FRP sheets, respectively. It is concluded that the suggested analysis technique has good reliability, and can be effectively applied in evaluating the effectiveness of reinforcing/retrofitting materials and techniques. Also, the Steel fiber and FRP sheet strengthening systems provided outstanding performance under high-velocity impact loads.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.985-989
• /
• 1999

Silica($SiO_2$) thin film was synthesized by a low pressure metal organic chemical vapor deposition(LPMOCVD) using organic silane compound. Triethyl orthosilicate was used as a source material. Operation pressure was 1~100 torr at outlet of the reactor and deposition temperature was $600{\sim}900^{\circ}C$. The experimental results showed that the high reaction temperature and high source gas concentration led to higher growth rate of $SiO_2$. The step coverage of films on micro-scale trenches was fairly good, which resulted from the phenomena that the condensed oligomers flow into the trenches. We estimated a reaction path that the source gas polymerizes and produces oligomers (dimer, trimer, tetramer, etc.), which diffuse and condense on the solid surface. The chemical species in the gas phase at the outlet of reactor tube were analyzed by quadrapole mass spectrometer. The peaks, assigned to be monomer, dimer of source gas and geavier molecules, were observed at 650 or $700^{\circ}C$. At higher temperature($900^{\circ}C$), the peaks of the heavy molecules disappeared, because almost all the source gas and intermediate(polymerized oligomer) molecules were oxidized or condensed on colder tube wall.

• Journal of agricultural medicine and community health
• /
• v.35 no.1
• /
• pp.67-76
• /
• 2010

Objectives: This study was attempted to identify the relationship between white blood cell counts and the metabolic syndrome. Methods: This study included 394 adults who visited the medical checkup center placed in Gwangju, January 1, 2008 to December 31, 2008. Index of blood test and physical checkup were performed on the study such as triglyceride, HDL-cholesterol, fasting sugar and white blood cell counts. Logistic regression analysis was used to evaluate the association between white blood cell counts, white blood cell differential count and metabolic syndrome with an adjustment age and smoking status. Results: The prevalence rate of metabolic syndrome was 25.3% among males and 13.3% among females, and was particularly high among males in their 40s. The increase in white blood cell counts lead to high prevalence of metabolic syndrome for both males and females. As white blood cell counts increased, the values of body mass index and cardiovascular risk factors were increased significantly. The odds ratio for elevated white blood cell counts increased significantly in the subjects with each components of the metabolic syndrome compared to the subjects without them. The lymphocyte counts in the white blood cell differential counts were higher in patients with metabolic syndrome than in those without. Conclusions: High level of white blood cell counts in normal range can be used as indicator in chronic inflammation. Increased white blood cell counts were significantly associated with metabolic syndrome.

• Journal of Mushroom
• /
• v.13 no.2
• /
• pp.114-118
• /
• 2015

Mycoleptodonoides aitchisonii has been used a culinary material and traditional medicine for a long time in worldwide and recently the researches to find biological effects have been increased such as dopamine activation, preventive effect against phytopathogens, inhibitive effect against erythrocyte coagulation, anti-oxidative effect, anti-tumorigenic effect, etc. However it is hard to cultivate Mycoleptodonoides aitchisonii it is impossible to be mass-produced and in order to solve the problem in this study we found the appropriate cultivation period and the harvest point for it. For life cycle (from primordium formation to harvest) the morphology, weight, and quantity of polysaccharide of Mycoleptodonoides aitchisonii were measured using with 5 bodies per a day and it could be divided for 4 stages; primordium formation, growth, needle maturation, and aging. And then from the results the Zeide nonlinear growth curve could be gotten. At 13th day after cultivation there is the relation between the change of media weight and body weight and at 14th day after cultivation the rate of polysaccharide in the body was 11 %. However in the case of O2 insufficient supply the malformation of them was observed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6694-6701
• /
• 2014

The aim of this study was to identify the correlation between low density lipoprotein (LDL) cholesterol and the pulmonary function. This study enrolled premenopausal women in their aged 40s, who visited the health promotion center of a general hospital more than two times. A total of 384 subjects were classified into four groups based on their LDL-cholesterol levels; A, LDL(mg/dL)<100 at both initial and follow-up; B, LDL<100 at initial but ${\geq}100$ at follow-up; C, $LDL{\geq}100$ at initial but <100 on follow-up; and D, $LDL{\geq}100$ at both the initial and follow-up test. The result showed no significant differences in the pulmonary function between the four groups. Multiple linear regression analysis, which was adjusted for age, body mass index, smoking, exercise, and follow-up duration, showed a significant negative relationship between the changes in the LDL and the changes in the $FEV_1/FVC$ (${\beta}=-0.109$, S.E.=0.029, P<0.001), but not in the $FEV_1$ and FVC. In conclusion, there was a significant but weak relationship between the LDL and pulmonary function. Further larger studies will be needed.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.137-148
• /
• 2006

The purpose of this study was to compare muscle activity in the lower extremity during walking wearing jogging and roller shoes. Twelve male middle school students (age: 15.0 yrs, height 173.7 cm, weight 587.7 N) who have no known musculoskeletal disorders were recruited as the subjects. Seven pairs of surface electrodes (QEMG8, Laxtha Korea, gain = 1,000, input impedance >$1012{\Omega}$, CMMR >100 dB) were attached to the right-hand side of the body to monitor the rectus femoris (RF), vastus medialis (VM), vastus lateralis (VL), biceps femoris (BF), tibialis anterior (TA), and medial (GM) and lateral gastrocnemius (GL) while subjects walked wearing roller and jogging shoes in random order at a speed of 1.1 m/s. An event sync unit with a bright LED light was used to synchronize the video and EMG recordings. EMG data were filtered using a 10 Hz to 350 Hz Butterworth band-passdigital filter and further normalized to the respective maximum voluntary isometric contraction EMG levels. For each trial being analyzed, five critical instants and four phases were identified from the recording. Averaged IEMG and peak IEMG were determined for each trial. For each dependent variable, paired t-test was performed to test if significant difference existed between shoe conditions (p<.05). The VM, TA, BF, and GM activities during the initial double limb stance and the initial single limb stance reduced significantly when going from jogging shoe to roller shoe condition. The decrease in EMG levels in those muscles indicated that the subjects locked the ankle and knee joints in an awkward fashion to compensate for the imbalance. Muscle activity in the GM for the roller shoe condition was significantly greater than the corresponding value for the jogging shoe condition during the terminal double limb stance and the terminal single limb stance. Because the subjects tried to keep their upper body weight in front of the hip to prevent falling backward, the GM activity for the roller shoe condition increased. It seems that there are differences in muscle activity between roller shoe and jogging shoe conditions. The differences in EMG pattern may be caused primarily by the altered position of ankle, knee, and center of mass throughout the walking cycle. Future studies should examine joint kinematics during walking with roller shoes.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.2
• /
• pp.107-113
• /
• 2011

To evaluate the performance of the hydrodynamic model, we introduced 10 skill assessments that are assorted by two groups: quantitative skill assessments (Absolute Average Error or AAE, Root Mean Squared Error or RMSE, Relative Absolute Average Error or RAAE, Percentage Model Error or PME) and qualitative skill assessments (Correlation Coefficient or CC, Reliability Index or RI, Index of Agreement or IA, Modeling Efficiency or MEF, Cost Function or CF, Coefficient of Residual Mass or CRM). These skill assessments were applied and calculated to evaluate the hydrodynamic modeling at one of Florida estuaries for water level, current, and salinity as comparing measured and simulated values. We found that AAE, RMSE, RAAE, CC, IA, MEF, CF, and CRM are suitable for the error assessment of water level and current, and AAE, RMSE, RAAE, PME, CC, RI, IA, CF, and CRM are good at the salinity error assessment. Quantitative and qualitative skill assessments showed the similar trend in terms of the classification for good and bad performance of model. Furthermore, this paper suggested the criteria of the "good" model performance for water level, current, and salinity. The criteria are RAAE < 10%, CC > 0.95, IA > 0.98, MEF > 0.93, CF < 0.21 for water level, RAAE < 20%, CC > 0.7, IA > 0.8, MEF > 0.5, CF < 0.5 for current, and RAAE < 10%, PME < 10%, CC > 0.9, RI < 1.15, CF < 0.1 for salinity.