• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.535-546
• /
• 2019

The paper presents a closed-form analytical solution for the ultimate strength of sandwich panels with metal faces and an elastic isotropic core during combined in-plane compression and lateral pressure under clamped boundary condition. By using the principle of minimum potential energy, the stress distribution in the faces during uni-axial edge compression and constant lateral pressure was obtained. Then, the ultimate edge compression was derived on the basis that collapse occurs when yield has spread from the mid-length of the sides of the face plates to the center of the convex face plates. The results were validated by nonlinear finite element analysis. Because the solution is analytical and closed-form, it is rapid and efficient and is well-suited for use in practical structural design methods, including repetitive use in structural optimization. The solution applies for any elastic isotropic core material, but the application that stimulated this study was an elastomer-cored steel sandwich panel that had excellent energy absorbing and protective properties against fire, collisions, ballistic projectiles, and explosions.

• Corrosion Science and Technology
• /
• v.17 no.2
• /
• pp.74-80
• /
• 2018

The electronic industries require environmentally-friendly and highly functional materials to enhance the quality of human life. Home appliances require insect repellent steels that work to protect household microwave ovens from incurring damage by insects such as fire ants and cockroaches in tropical regions. Thus, POSCO has developed new types of functional steels, coated with an array of organic-inorganic hybrid composites on the steel surface, to cover panels in microwave ovens and refrigerators. The composite solution uses a fine dispersion of hybrid solution with polymeric resin, inorganic and a pyrethroid additive in aqueous media. The hybrid composite solution coats the steel surface, by using a roll coater and is cured using an induction curing furnace on both the continuous galvanizing line and the electro-galvanizing line. The new steels were evaluated for quality performances, salt spray test for corrosion resistance and biological performance for both insect repellent and antimicrobial activity. The new steels with organic-inorganic composite coating exhibit extraordinarily biological functionalities, for both insect repellent and antimicrobial activities for short and long term tests. The composite-coating solution and experimental results are discussed and suggest that the molecular level dispersion of insecticide on the coating layer is key to biological functional performances.

• Journal of Korean Society of Forest Science
• /
• v.96 no.5
• /
• pp.515-519
• /
• 2007

An imperfect fungus Fusiococcum species was isolated from Quercus dentata. A naturally infected Daimyo oak tree was collected and showed elongate wounds on the stem. The fungal cultures were initially white and cottony, and later turned dark gray. Numerous solitary pycnidia were developed on the medium surface, and typically spherical. Yellowish conidial masses were exuded from pycnidia on the culture plates. Conidial masses were swollen and measured as approximately 100 to $300{\mu}m$ in length. It appeared that conidia were usually held together in globose to oval drops. Conidia were hyaline, single-celled (nonseptate), ellipsoid to fusoid, and measured as approximately $8.0{\times}2.7{\mu}m$. Based on these cultural and morphological characteristics, the fungal isolate was identified as a species of Fusicoccum Corda. To preserve and examine fungal spores exuded from pycnidia on the medium surface, a vapor fixation procedure for scanning electron microscopy was employed in this study. The specimens were exposed to the vapor of 2% (v/v) glutaraldehyde and 2% (w/v) osmium tetroxide each for 2 h. With the vapor fixation we obtained excellent retention of conidial masses in this study. The simple and versatile procedure for demonstrating fungal spores and their exudation from fruiting bodies would facilitate characterization of diverse pathological and environmental isolates as they are in native environments.

• Journal of the Korean housing association
• /
• v.21 no.2
• /
• pp.133-144
• /
• 2010

The purpose of this study is to analyze the uses and exterior design of the balconies in urban housing from the ancient times to the 19th century. In doing so, the paper seeks to investigate the cultural identity of the balcony in urban housing. The results are as follow. First, in the urban housing the balcony space were made for protection from the heat, light and ventilation; gardening; views toward the streets, city, waterside, inner court, domain for men; breathing french air; watching ceremony, festivals and events; simple houseworks like drying, carpet cleaning and hair coloring; lever installation and fire escape. Second, as part of exterior design the typical projecting characteristic of the balconies was emphasized and they became an impotent decorative element. The monotonous facade changed to a lively design with a rhythmical sense. On the facade the effects of horizontal movement, symmetry or asymmetry from the main entrance, and the center-projection (rialto) were created. In the urban housing the balconies were used for cultural activities which supplement and enlarge the function of the interior space, and moreover the rich effects of the facade contributed to the creation of attractive urban landscape.

• Culinary science and hospitality research
• /
• v.12 no.1 s.28
• /
• pp.93-110
• /
• 2006

Eumsik-dimibang is the oldest and first cooking recipe book in Korean language ever published in Korea. It was examined in order to find out food ingredients being used as side dishes and its cooking methods used at that time. As side dishes, there were many foods which used dogs as food ingredients for making Gae Jang Jim and Gae Jang etc. as well as Dong A such as Dong A Nurumi and Dong A sun. Also, there were many foods prepared by Nurumi cooking method for making Gae Jang Guk, Nurumi, eggplant Nurumi etc. From cooking methods for food ingredients for side dishes at that time, following characteristics could be found. First, there was a cooking method of broiling meat on fire after blanching it in water. Second, many cooking methods were used to remove fetid smells and fishy smells (using ginger, pepper, cheoncho etc). Third, there was a method which demanded much attention and devotion in the course of cooking. Fourth, use and cooking method of flour were diversified.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.6
• /
• pp.86-95
• /
• 2003

The object of this paper is to correct check the tree situation and quantity around highway. Also, those data utilize in order to establish plan about how to the long and short term landscape construction and maintain program. The result of this study can be summarized as follows; 1. Tree decrease rates for 8 branch offices were Jongbu(5.62%), Gangwon(4.32%), Chungcheong (3.35%), Honam(5.62%), Gyeongbuk(3.06%), Gyeongnam(5.60%), Seorak training center(0.31%), Headquarter(1.54%). Also decrease causes were traffic accidents(1.8%), air po11ution(4.7%), humid damage(0.9%), insect and disease(1.2%), wind and rainfall(3.4%), dry damage(3.5%), cold damage (1.0%), fire(3.1%), damage of the man and anima1(4.1%), remove bad tree(13.1%), bad rooting(9.5%) and etc.(53.7%). 2. Improve methods of tree death problems were regulation management(ferti1ize, irrigation and pesticide work), improvement of draining system, Pull out the weeds, Plant native plants, utilize organic matter fertilize and plant environment trees.

• The Korean Journal of Emergency Medical Services
• /
• v.17 no.3
• /
• pp.53-60
• /
• 2013

Purpose: The purpose of the study is to emphasize the importance of out-of-hospital cardiac arrest resuscitation. This resuscitation by paramedic is very effectively performed under the medical direction of the doctors. Methods: The cardiac arrest victim was 4 month old infant. Informed consent from the parents of the infant was received. CPR combined with 150J defibrillation was performed to the 4 month old infant. Results: We reported that the 4 month old infant survived the cardiac arrest. Out-of-hospital cardiac arrest infant survived after 150J automated external defibrillator and CPR performance. Conclusion: Specific operative protocol is important because the paramedic can apply the proper manual defibrillator effectively. It is important to extend the work scpoe of the EMT.

• Journal of the Korean Society of Safety
• /
• v.29 no.6
• /
• pp.22-27
• /
• 2014

The market of performance arts industry such as concert, musical and opera etc is now expanding in Korea. However, the inadequate safety management in theatres often causes some accidents. The guarantee of safety in theatres is very important since the accidents in theaters can lead to many casualties and serious property damages. In particular, the small theatres which have no obligation of safety inspection by law are very vulnerable to safety mattes. This study has done the research into the improvement of safety in small theaters through the inspection and analysis of their safety status. For the purpose, this study has inspected and analyzed the safety status of small theaters over 120 in the field of theater management and operation, fire protection, electrical facilities, ceiling structure and etc. Moreover, this study had investigated the law and technical standards related to theatre safety. This study shows that the essentials to make sure of the safety in small theaters are (1) the education to improve the sense of security of people who work in theaters (2) the training to strengthen the operating skills of the facilities in theaters (3) the cooperation and support of the related organization such as technical research center, central and local government.

• Journal of the Korean Institute of Rural Architecture
• /
• v.14 no.4
• /
• pp.11-18
• /
• 2012

This study is to establish the dwelling principle and architectural characteristics of Powhatan Indian Community in Eastern part of North America. To find a pattern and dwelling principle of town building and housing, I have researched both site survey of Powhatan at Jamestown Settlement in Virginia and a related references of North America Indian. In addition of study, I have tried to understand their life style in 17C, a spatial characteristics of space composition, and a using materials of Yehakin which means Powhatan's house in the exhibition hall of Jamestown Settlement. The results of this paper are as follows: First, the form of Powhatan house is like a longhouse which has two types that are oblong and rectangular house. Usually they had lived in the style of oblong house. Second, there are three patterns to set up the semi-permanent settlement of Powhatan, which are circle-type, street-type, and free-type of village. Third, the fire place of interior space that is most importance element to heat and cook is put it into the center of room, and the other beds and shelves are arranged by the side of wall which is covered of rush matt.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.20-29
• /
• 2007

The engagement control software embedded in the weapon control computer of the fire control center for air defense missile system is large-scale real-time software. The use of typical software development methodologies is not appropriate to develop such large-scale embedded software in terms of reusability, reliability, and productivity for the reason that it is significantly complicated, and highly dependent on hardware platforms and developers. In this paper, a model-based software architecture using components based on UML 2.0 for the engagement control software is presented in order to solve these problems. This software architecture is verified using the black-box test, the scenario-based test, and the Ethernet packet monitoring test methods. The results demonstrate that the developed software architecture can be employed to enhance reusability, maintainability, and productivity of large-scale embedded software.