• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.427-431
• /
• 2007

Applications in present-day mobile communication systems particularly require miniaturized dimensions and low-profiles of antenna in order to meet the mobile units. Thus, size reductions and bandwidth enhancements are becoming crucial design considerations for practical applications of microstrip antennas. The motivation of further experiments have been stepped to follow those studies for achieving compact and broadband, even multiplied operation modes, which are greatly increased with much attentions recently. To obtain broadband, single-feed, circularly polarized characteristics of microstrip antennas, a design with feed-line ought to be a factor of two. Usually, diagonally balanced-line feeds with hybrid coupler are employed to attain circular polarizations. We firstly formulated DGS (Defected Ground Structures) based operation principles of the entire microstrip components and therefore were able to derive impedance variance of feed-lines. After verifying corresponding experimental results, we targeted the frequency bands of UHF RFID (Ultra High Frequency Radio Frequency IDentification) and approximately of 0.4-2.4GHz have exhibited remarkable two resonance amplitudes as a dual band antenna. Our secondary researches were aimed to design quad band microstrip antenna which represents four resonance characteristics within the identical frequency bands as well. Microstrip patch has been meandered to lengthen the electrical paths, and the other design criteria with respecting physical parameters including radiation patterns and impedance bandwidths measurements will be described for verification. Advisable applications of these antennas can be GSM850, GSM900, GPS (L1-1575 and L2-1227) and UMTS-2110 of cellular systems, which extremely desire multiband and minimum size.

• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.144-154
• /
• 2004

In this paper we apply the space-time block codes (STBCs), the key technologies for the 4th generation mobile communication systems, to the OFDM system and analyze their performances. First, we derive the signal models for representative STBC schemes and demodulation procedures for each scheme. We also select the parameters for OFDM system considering mobile cellular environments and assign adequate modulation schemes to STBC-OFDM schemes according to the transmission rate from 2bps/Hz to 4bps/Hz. We finally compare and analyze the performances of STBC-OFDM schemes for the selected transmission rates through computer simulations, together with performance comparison when the same modulation scheme being adopted.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.6
• /
• pp.824-834
• /
• 1993

In cellular mobile communication systems, if the size of a cell is decreasing for economic utilization of frequency resources, frequent handovers may be requested because the time a mobile stays in a cell is decreasing. In general the measured parameters to decide handover including RSSI, BER, and the distance between mobile station and base station, are usually incorrect and handover decision using single parameter insufficient. Therefore, the better handover algorithm should take over the problems of this uncertain measurements, and make the decision more robust and flexible by the consideration of all those decision parameters at the same time. We propose a novel handover algorithm based the multicriteria decision making, in which those parameters are participated in the decision process using aggregation function in fuzzy set theory. As a simulation results, the overall decision making is more reliable and flexible than the conventional method using only one parameter, RSSI in terms of call force ratio, and handover request ratio.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.433-436
• /
• 2013

Massive MIMO communication system with huge antennas has been attracting intensive attention as one of key technologies to increase the spectral efficiency. Many previous studies investigated single user Massive MIMO scheme in cellular downlink. Recently, however, intensive researches on multiuser-based Massive MIMO are performed to overcome the problem caused by the limited number of antennas in mobile stations. Although the Massive MIMO scheme based on huge number of antennas inevitably causes hardware and computational complexity in baseband and radio frequency (RF) elements, the problem can be mitigated without serious performance degradation by limiting the number of baseband and RF elements below the number of transmit antennas of base station and opportunistically selecting transmit antennas according to channel states, where the number of selected antennas corresponds to the number of baseband and RF elements in base station. Accordingly, this paper proposes a simple antenna selection scheme for multiuser-based Massive MIMO systems. Our simulation results indicate that the proposed antenna selection scheme can achieve comparable performance to the conventional scheme without antenna selection.

• Journal of Communications and Networks
• /
• v.13 no.1
• /
• pp.70-76
• /
• 2011

This paper presents the unified user equipment (UE) baseband modulation and demodulation (modem) hardware platform architecture to support multiple radio access technologies. In particular, this platform selectively supports two systems; one is HEDGE system, which is the combination of third generation partnership project (3GPP) Release 7 high speed packet access evolution (HSPA+) and global system for mobile communication (GSM)/general packet radio service (GPRS)/enhanced data rates for GSM evolution (EDGE), while the other is LEDGE system, which is the combination of 3GPP Release 8 long term evolution (LTE) and GSM/GPRS/EDGE. This is done by applying the flexible pin multiplexing scheme to a hardwired pin mapping process. On the other hand, to provide stable connection, high portability, and high debugging ability, the stacking structure is employed. Here, a layered board architecture grouped by functional classifications is applied instead of the conventional one flatten board. Based on this proposed configuration, we provide a framework for the verification step in wireless cellular communications. Also, modem function/scenario test and inter-operability test with various base station equipments are verified by system requirements and scenarios.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1713-1720
• /
• 2009

An local area weather condition monitoring system to minimize many disasters from the sudden change of weather condition in local and mountain ales is proposed. Firstly, the comparison of present state of the related monitoring systems and the possibility of realization with some merits are investigated. Moreover, this paper present direction of local area weather condition monitoring system based on integration of wireless sensor network and CDMA network following some case study. The sensor node for wireless sensor network and an interface dongle are fabricated for the system. The stand-alone software in cellular phone is also developed. Through the efficient integration of both networks, the measured weather condition data from sensors can be transmitted to the server or mobile to monitor with high reliability. The proposed monitoring system will guide new type of project in wireless sensor network and support alarm service of the sudden change of weather condition to mobile user from central official regulations.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.1
• /
• pp.10-18
• /
• 2007

Mobile communication devices such as PDAs, cellular phones, etc., need to perform several kinds of computation-intensive functions including H.264 encoding/decoding and 3D graphics processing. In this paper, new reconfigurable architecture is described, which can perform either motion estimation for H.264 or rendering for 3D graphics. The proposed motion estimation techniques use new efficient SAD computation ordering, DAU, and FDVS algorithms. The new approach can reduce the computation by 70% on the average than that of JM 8.2, without affecting the quality. In 3D rendering, midline traversal algorithm is used for parallel processing to increase throughput. Memories are partitioned into 8 blocks so that 2.4Mbits (47%) of memory is shared and selective power shutdown is possible during motion estimation and 3D graphics rendering. Processing elements are also shared to further reduce the chip area by 7%.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.9
• /
• pp.263-272
• /
• 2023

Industrial Internet of Things (IIoT) is an important factor in increasing production efficiency in industrial sectors, along with data collection, exchange and analysis through large-scale connectivity. However, as traffic increases explosively due to the recent spread of IIoT, an allocation method that can efficiently process traffic is required. In this thesis, I propose a two-stage task offloading decision method to increase successful task throughput in an IIoT environment. In addition, I consider a hybrid offloading system that can offload compute-intensive tasks to a mobile edge computing server via a cellular link or to a nearby IIoT device via a Device to Device (D2D) link. The first stage is to design an incentive mechanism to prevent devices participating in task offloading from acting selfishly and giving difficulties in improving task throughput. Among the mechanism design, McAfee's mechanism is used to control the selfish behavior of the devices that process the task and to increase the overall system throughput. After that, in stage 2, I propose a multi-armed bandit (MAB)-based task offloading decision method in a non-stationary environment by considering the irregular movement of the IIoT device. Experimental results show that the proposed method can obtain better performance in terms of overall system throughput, communication failure rate and regret compared to other existing methods.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.69-76
• /
• 2016

In this paper, we investigate the system performance of a cooperative relaying system of Non-orthogonal multiple access (NOMA) with successive interference cancellation (SIC), which is considered promising application in fifth generation (5G) cellular networks. Previous studies have focused on the selected relays, however we include the maxmin relay selection and derive analytical outage probability of opportunistic incremental relaying systems. For the realistic mobile environment, the distributions of relays are modeled as a homogeneous Poisson point process (PPP). And maximal ratio combining (MRC) is adapted to improve the system performance at the destination node. Analytical results demonstrate the outage probability improves with the near/far user power ratio, and the cooperative relaying scheme can achieve low outage probability in comparison to the no relaying scheme. It is also conformed that the increase of the intensity of PPP cause higher gains of the spacial diversity and hence the performance improves.

• Journal of the Korea Convergence Society
• /
• v.10 no.10
• /
• pp.107-115
• /
• 2019

Effective construction safety management systems are desperately required for reducing damage caused by increasing safety accidents in construction sites. Safety accidents in construction sites can effectively protect if proactive measures are taken to prevent unauthorized worker access the expected hazardous area. In this study, we have developed a IoT(Internet of Things)-based dangerous zone alarming system for safety management in construction sites, which can be operated at low cost in large-scale sites as well as small and medium-sized construction sites. The development system utilizes a Zigbee-based beacon technology and cellular mobile communication technology to detect when authorized workers, unauthorized field workers or outsiders approaches hazardous zones. If somebody approaches the dangerous zones the system notifies immediately to the safety manager with a danger warning signal. It is expected that this system can effectively prevent safety accidents when applied to construction sites.