• Asian-Australasian Journal of Animal Sciences
• /
• 제3권1호
• /
• pp.47-52
• /
• 1990

During prolonged exposure to the sun for 8 h each day for 10 days in which the highest ambient temperature around 14:00 h was $39^{\circ}C$, buffaloes exposed to the sun without shade increased the turnover of body water by 35% and 76% on day 5 and day 10 of exposure respectively. The total body water markedly decreased on day five and this amount was maintained thereafter. Plasma and blood volumes did not change significantly on day five but markedly decreased on day 10. Packed cell volume significantly decreased on day five and day 10 of the exposure period. The reduction of packed cell volume on day 10 coincided with the decrease in total plasma water. On day 10 of the exposure, an increase in the rate of liquid flow from the rumen was noted. It is concluded that on the fifth day of exposure, the increase in the evaporative cooling process was attributed to initial mobilization of water from the intracellular compartment. The reduction of both plasma and cell volumes occurring from day five to day 10 indicated a loss of body water from both intracellular and extracellular compartments.

• 한국재료학회지
• /
• 제27권12호
• /
• pp.688-694
• /
• 2017

Porous materials such as polymeric foam are widely adopted in engineering and biomedical fields. Porous materials often exhibit complex nonlinear behaviors and are sensitive to material and environmental factors including cell size and shape, amount of porosity, and temperature, which are influenced by the type of base materials, reinforcements, method of fabrication, etc. Hence, the material characteristics of porous materials such as compressive stress-strain behavior and void volume fraction according to aforementioned factors should be precisely identified. In this study, unconfined uniaxial compressive test for two types of closed-cell structure polyurethane foam, namely, 0.16 and $0.32g/cm^3$ of densities were carried out. In addition, the void volume fraction of three different domains, namely, center, surface and buckling regions under various compressive strains (10 %, 30 %, 50 % and 70 %) were quantitatively observed using Micro 3D Computed Tomography(micro-CT) scanning system. Based on the experimental results, the relationship between compressive strain and void volume fraction with respect to cell size, density and boundary condition were investigated.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.181-183
• /
• 2002

The accurate permeability for preform is critical to model and design the impregnation of fluid resin in the composite manufacturing process. In this study, the in-plane and transverse permeability for a woven fabric are predicted numerically through the coupled flow model which combines microscopic with macroscopic flow. The microscopic and macroscopic flow which are flows within the micro-unit and macro-unit cell, respectively, are calculated by using 3-D CVFEM(control volume finite element method). To avoid checker-board pressure field and improve the efficiency on numerical computation, A new interpolation function for velocity is proposed on the basis of analytic solutions. The permeability of plain woven fabric is measured through unidirectional flow experiment and compared with the permeability calculated numerically. Based on the good agreement of the results, the relationships between the permeability and the structures of preform such as the fiber volume fraction and stacking effect can be understood. The reverse and the simple stacking are taken in account. Unlike past literatures, this study is based on more realistic unit cell and the improved prediction of permeability can be achieved. It is observed that in-plane flow is more dominant than transverse flow in the real flow through preform and the stacking effect of multi-layered preform is negligible. Consequently, the proposed coupled flow model can be applied to modeling of real composite materials processing.

• 대한화학회지
• /
• 제44권6호
• /
• pp.587-591
• /
• 2000

고분자액체의 상태방정식을 구하기 위하여 많은 이론들이 제안되어 왔다. 이론들의 대부분은 cell, hole, free volume 또는 lattice 등의 개념에 근거를 두고 있다. 가장 성공적인 이론중의 하나로 평가받고 있는 것이 free volume의 개념을 근거로 한 Flory의 상태방정식 이론이다. 본 연구에서는 Flory 이론에서 사용한 van der Waals 포텐셜을 수정하여 새로운 상태방정식을 만들었다. 계산결과 새로운 상태방정식은 Flory 이론보다 PVT 실험값과 더 잘 일치함을 알 수 있었다.

• 한국광학회지
• /
• 제22권2호
• /
• pp.77-82
• /
• 2011

광음향 분광학 연구에 빈번히 사용되는 최소 부피 개방형 광음향 셀을 이용하여 광음향 신호를 측정할 경우 최소 부피 광음향셀의 밀폐상태는 광음향 신호의 재현성에 큰 영향을 미친다. 따라서 본 논문에서는 최소 부피 광음향 셀의 밀폐 효율을 높일 수 있는 고무오링 밀폐재를 적용한 구조를 설계하고 제작한 후, 제작한 구조체를 이용하여 다양한 재질의 고무 오링에 대한 광음향 신호를 주파수 별로 측정하고 분석하였다. 실험 결과 진공 그리스를 이용하여 광음향 셀을 밀폐하는 기존의 방식과 비교했을 때, 실리콘 고무 오링을 밀폐재로 사용하는 경우 광음향 신호의 진폭과 위상의 재현성이 각각 최대 53.4%와 80.4%까지 향상될 수 있음을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2782-2791
• /
• 1996

The effective longitudinal shear modulus(LSM) of continuous composites is studied theoretically and numerically using 3-phase unit cell model. Circular, hexagonal and rectangular shapes of reinforced fiber are considered to predict the shear modulus as a function of elastic modulus of each phase and volume fraction of interphase and reinforced fiber. It is found that rectangular fiber shape in low fiber volume fraction($v_f$<30%) and circular fiber shape in high volume fraction($v_f$>40%) shows the higher longitudinal shear modulus. Also the obtained values of LSM for rectangular array and by numerical analysis are higher than those of hexagonal array and by theoretical analysis respectively. The reinforcing effects of interphase are more significant in cases of higher fiber volume fraction and circular fiber shape. Not only the spatial distribution and shape of reinforcing fiber but also the volume of interphase have a pronounced effects on the overall LSM. It is also found that the tangent moduous of 2-and 3-phase polymer matrix composites is insensitive to the shape and distribution of reinforcing fibers.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.1-4
• /
• 2008

Fuel cells have the potential of providing several times higher energy storage densities than those possible using current state-of-the-art lithium-ion batteries, but current energy density of fuel cell system is not better than that of lithium-ion batteries. To achieve the high energy density, volume and weight of fuel cell system need to be reduced by miniaturizing system components such as stack, fuel tank, and balance-of-plant. In this paper, the thin flexible PCB (Printed circuit board) is used as a current collector to reduce the stack volume. Two end plates are made from light weight aluminum alloy plate. The plate surface is wholly oxidized through the anodizing treatment for electrical insulation. The opening rate of cathode plate hole is optimized through unit cell performance measurement of various opening rates. The performances are measured at room temperature and ambient pressure condition without any repulsive air supply. The active area of MEA is 10.08 $cm^2$ and active area per a unit cell is 1.68 $cm^2$. The peak power density is about 210 mW/$cm^2$ and the air-breathing planar stack of 2 Wis achieved as a small volume of 18 cc.

• 식물조직배양학회지
• /
• 제28권6호
• /
• pp.311-315
• /
• 2001

담배 (Nicotiana tabacum L cv. Xanthi) 및 애기장대 (Arabidopsis thaliana cv. Col-0)에서 다양한 발달단계의 잎으로부터 원형질체를 분리하여 세포 크기와 엽록체의 크기 및 수의 관계를 조사하였다. 담배 원형질체의 지름이 15.6 $\mu\textrm{m}$ 이하인 작은 세포는 20여 개 이하의 엽록체를 가지고 있었는데, 엽록체의 평균 크기는 두께 0.93 $\mu\textrm{m}$, 길이 3.3$\mu\textrm{m}$로 나타났다. 잎이 신장되어 원형질체의 지름이 평균 30 $\mu\textrm{m}$에서 45 $\mu\textrm{m}$로 증가함에 따라, 엽록체는 두께 1.57 $\mu\textrm{m}$, 길이 5.55 $\mu\textrm{m}$의 크기로 일정하게 유지되었으나 엽록체의 수는 평균 42개에서 101개로 증가하였다. 이와 같이 담배에서 잎의 크기 또는 세포의 크기와 엽록체의 수 또는 부피는 비례관계를 나타냈고 동일한 경향이 애기장대에서도 관찰되었다. 세포 부피에 대한 총 엽록체의 부피의 비는 다양한 발달단계에서 담배는 10.5%, 애기장대는 32.5%로 일정하게 유지되었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 추계 학술대회논문집
• /
• pp.31-36
• /
• 2003

A field reconstruction scheme for a cell centered finite volume method on unstructured meshes is developed. Regardless of mesh quality, this method is exact within a machine accuracy if the solution is linear, which means it has full second order accuracy. It does not have any limitation on cell shape except convexity of the cells and recovers standard discretization stencils at structured orthogonal grids. Accuracy comparisons with other popular reconstruction schemes are performed on a simple example.

• 한국작물학회지
• /
• 제33권4호
• /
• pp.353-359
• /
• 1988

두께가 서로 다른 $C_3$ 식물의 잎은 단위엽면적당 광합성 능력에 있어서도 차이가 나는 바 잎의 내부구조와 기체교환 사이의 관계를 바탕으로 그 원인을 구명하였다. 광합성의 2대 제한요인으로 기체확산과 생화학적 과정의 상대적인 중요도를 결정하기 위해 중엽세포의 표면은 기체확산 저항의, 그리고 세포의 체적은 탄소고정 능력의 지표로 가정하였다. 즉 세포의 표면적이 증가하면 이산화탄소의 액상확산 저항이 감소하며 체적이 증대되면 carboxylation, oxygenation, 그리고 dark respiration 반응속도가 증가한다고 간주하였다. 이러한 개념을 함축하는 광합성 모형을 작성하고 이 가설의 검증을 위해 대두 품종 Amsoy잎을 이용한 실험을 수행하였다. 생장조절실내에서 200, 400, 600$\mu$mol photons m$^{-2}$ s$^{-1}$ PAR을 공급하여 서로 다른 두께의 잎을 준비하였으며 제3 및 4본엽에 대해 1,000 $\mu$mol photons m$^{-2}$ s$^{-1}$ PAR 및 28 기온 환경하에서 이산화탄소 흡수속도를 측정한 결과 세포의 체적과 표면적의 영향을 동시에 고려한 광합성 모형이 세포 표면적만을 고려한 경우 보다 실측치에 가까운 예측치를 산출하였다. 이로 미루어 세포의 표면적과 체적은 잎의 두께 및 그에 따른 광합성 능력의 예측에 적절한 변수로 간주된다.