• Journal of the Korean institute of surface engineering
• /
• v.48 no.1
• /
• pp.23-26
• /
• 2015

What causes the transformation of a solar cell is the behavior difference of thermal expansion occurred between the substrate and the layer of semiconductor used in the solar cell. Therefore, the substrate has to possess a behavior of thermal expansion that is similar with that of semiconductor layer. This study employed electroforming to manufacture Fe-Ni alloy materials of different compositions. To verify the result from a finite element analysis, a two-dimensional Mo substrate was calculated and its verification experiment was conducted. The absolute values from the finite element analysis of Mo/substrate structure and its verification experiment showed a difference. However, the size of residual stress of individual substrate compositions had a similar tendency. Two-dimensional CIGS/Mo/$SiO_2$/substrate was modeled. Looking into the residual stress of CIGS layer occurred while the temperature declined from $550^{\circ}C$ to room temperature, the smallest residual stress was found with the use of Fe-52 wt%Ni substrate material.

• Korean Journal of Optics and Photonics
• /
• v.29 no.6
• /
• pp.247-252
• /
• 2018

We report amplification of a small signal in a diode-pumped Cs vapor cell with 500 torr of ethane buffer gas, in the low-pump-power regime of 200 mW or less. For efficient amplifier operation, the pump and signal beams were coupled to a single-mode optical fiber, and completely overlapped in the Cs vapor cell. We investigated the amplification of the small signal according to cell temperature, signal power, and pump power. An amplification factor of 56 was achieved under the conditions of cell temperature of $115^{\circ}C$, signal power of 0.1 mW, and pump power of 200 mW.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.1
• /
• pp.67-73
• /
• 2021

Nickel-rich lithium nickel-cobalt-manganese oxides (NCM) are viewed as promising cathode materials for lithium-ion batteries (LIBs); however, their poor cycling performance at high temperature is a critical hurdle preventing expansion of their applications. We propose the use of a functional electrolyte additive, triphenyl phosphate (TPPa), which can form an effective cathode-electrolyte interphase (CEI) layer on the surface of Ni-rich NCM cathode material by electrochemical reactions. Linear sweep voltammetry confirms that the TPPa additive is electrochemically oxidized at around 4.83 V (vs. Li/Li+) and it participates in the formation of a CEI layer on the surface of NCM811 cathode material. During high temperature cycling, TPPa greatly improves the cycling performance of NCM811 cathode material, as a cell cycled with TPPa-containing electrolyte exhibits a retention (133.7 mA h g-1) of 63.5%, while a cell cycled with standard electrolyte shows poor cycling retention (51.3%, 108.3 mA h g-1). Further systematic analyses on recovered NCM811 cathodes demonstrate the effectiveness of the TPPa-based CEI layer in the cell, as electrolyte decomposition is suppressed in the cell cycled with TPPa-containing electrolyte. This confirms that TPPa is effective at increasing the surface stability of NCM811 cathode material because the TPPa-initiated POx-based CEI layer prevents electrolyte decomposition in the cell even at high temperatures.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.3
• /
• pp.436-443
• /
• 2016

Exposure to cold may affect growth performance in accordance with the metabolic and immunological activities of animals. We evaluated whether ambient temperature affects growth performance, blood metabolites, and immune cell populations in Korean cattle. Eighteen Korean cattle steers with a mean age of 10 months and a mean weight of 277 kg were used. All steers were fed a growing stage-concentrate diet at a rate of 1.5% of body weight and Timothy hay ad libitum for 8 weeks. Experimental period 1 (P1) was for four weeks from March 7 to April 3 and period 2 (P2) was four weeks from April 4 to May 1. Mean ($8.7^{\circ}C$) and minimum ($1.0^{\circ}C$) indoor ambient temperatures during P1 were lower (p<0.001) than those ($13.0^{\circ}C$ and $6.2^{\circ}C$, respectively) during P2. Daily dry matter feed intake in both the concentrate diet and forage groups was higher (p<0.001) during P2 than P1. Average daily weight gain was higher (p<0.001) during P2 (1.38 kg/d) than P1 (1.13 kg/d). Feed efficiency during P2 was higher (p = 0.015) than P1. Blood was collected three times; on March 7, April 4, and May 2. Nonesterified fatty acids (NEFA) were higher on March 7 than April 4 and May 2. Blood cortisol, glucose, and triglyceride concentrations did not differ among months. Blood CD4+, CD8+, and CD4+CD25+ T cell percentages were higher, while CD8+CD25+ T cell percentage was lower, during the colder month of March than during May, suggesting that ambient temperature affects blood T cell populations. In conclusion, colder ambient temperature decreased growth and feed efficiency in Korean cattle steers. The higher circulating NEFA concentrations observed in March compared to April suggest that lipolysis may occur at colder ambient temperatures to generate heat and maintain body temperature, resulting in lower feed efficiency in March.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.3
• /
• pp.223-229
• /
• 2013

Polymer Electrolyte Membrane Fuel Cell (PEMFC) is a power generation system to convert chemical energy of fuels and oxidants to electricity directly by electrochemical reactions. As a catalyst support for PEMFCs, carbon black has been generally used due to its large surface area and high electrical conductivity. However, under certain circumstances (start up/shut down, fuel starvation, ice formation etc.), carbon supports are subjected to serve corrosion in the presence of water. Therefore, it would be desirable to switch carbon supports to corrosion-resistive support materials such as metal oxide. $TiO_2$ has been attractive as a support with its stability in fuel cell operation atmosphere, low cost, commercial availability, and the ease to control size and structure. However, low electrical conductivity of $TiO_2$ still inhibits its application to catalyst support for PEMFCs. In this paper, to explore feasibility of $TiO_2$ as a catalyst support for PEMFCs, $TiO_2$ nanofibers were synthesized by electrospinning and calcinated at 600, 700, 800 and $900^{\circ}C$. Effects of calcination temperature on crystal structure and electrical conductivity of electrospun $TiO_2$ nanofibers were examined. Electrical conductivity of $TiO_2$ nanofibers increased significantly with increasing calcination temperature from $600^{\circ}C$ to $700^{\circ}C$ and then increased gradually with increasing the calcination temperature from $700^{\circ}C$ to $900^{\circ}C$. It was revealed that the remarkable increase in electrical conductivity could be attributed to phase transition of $TiO_2$ nanofibers from anatase to rutile at the temperature range from $600^{\circ}C$ to $700^{\circ}C$.

• The Korean Journal of Physiology and Pharmacology
• /
• v.14 no.6
• /
• pp.419-425
• /
• 2010

Mast cells are activated by specific allergens and also by various nonspecific stimuli, which might induce physical urticaria. This study investigated the functional expression of temperature sensitive transient receptor potential vanilloid (TRPV) subfamily in the human mast cell line (HMC-1) using whole-cell patch clamp techniques. The temperature of perfusate was raised from room temperature (RT, $23{\sim}25^{\circ}C$) to a moderately high temperature (MHT, $37{\sim}39^{\circ}C$) to activate TRPV3/4, a high temperature (HT, $44{\sim}46^{\circ}C$) to activate TRPV1, or a very high temperature (VHT, $53{\sim}55^{\circ}C$) to activate TRPV2. The membrane conductance of HMC-1 was increased by MHT and HT in about 50% (21 of 40) of the tested cells, and the I/V curves showed weak outward rectification. VHT-induced current was 10-fold larger than those induced by MHT and HT. The application of the TRPV 4 activator $3{\alpha}$-phorbol 12,13-didecanoate ($4{\alpha}$ PDD, $1\;{\mu}M$) induced weakly outward rectifying currents similar to those induced by MHT. However, the TRPV3 agonist camphor or TRPV1 agonist capsaicin had no effect. RT-PCR analysis of HMC-1 demonstrated the expression of TRPV4 as well as potent expression of TRPV2. The $[Ca^{2+}]_c$ of HMC-1 cells was also increased by MHT or by $4{\alpha}$ PDD. In summary, our present study indicates that HMC-1 cells express $Ca^{2+}$-permeable TRPV4 channels in addition to the previously reported expression of TRPV2 with a higher threshold of activating temperature.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.1
• /
• pp.45-53
• /
• 2012

In this paper, oil spreading simulation model is proposed for analyzing the oil spreading phenomenon rapidly when the ocean is polluted by the oil from a stranded ship. The space occupied by the ocean is converted into the latticed cell, and the each cell contains the information, such as the quantity of the oil, the temperature of the ocean, and the direction of current and wind. Two states, such as "clean" and "polluted" are defined in the each cell, and the oil in the cell spreads to the neighbor cells by the spreading rules. There are three spreading rules. First, the oil in the certain cell only spreads to the neighbor cells that contain larger oil than the certain cell. Second, the oil evaporates in proportion to the temperature of the ocean at the every time step. Third, the oil spreading property is affected by the direction and the speed of the current and the wind. The oil spreading simulation model of the each cell is defined by using the combined discrete event and discrete time simulation model architecture with the information and the spreading rules in the cell. The oil spreading simulation is performed when the oil of 10,000 kL is polluted in the ocean environment of 300 m by 300 m with various current and wind.

• Archives of Pharmacal Research
• /
• v.3 no.1
• /
• pp.7-12
• /
• 1980

Ampliciline was synthesized from 6-amino-pencillanic acid (6-APA) and D-.alpha. phenylglycine methyl ester by using amplicilin synthesizing enzyme from Peudomonas melanogenum (IAM 1655). The whole cell enzyme was immobilized by entrapping it in the polyacrylamide gel lattices. The polymer used in the enzyme entrapment was made from 150 mg per ml of acrylamide monomer and 8 mg per ml of N, N'-methylenebisacrylamide. About 200 mg/whole cell enzyme was mixed in the polymer for entrapment. The maximal activity retention after immobilization was 56%. The optimal pH values for the whole cell enzyme and the immobilized whole cell enzyme were 6.0 and 5.9, respectively. The optimal temperature for the enzyme activity were the same for both type of preparations. The enzyme stabilities against pH and heat increased for immobilized whole cell enzyme. Immobilized cell was more stable especially in the acidic condition while both type were found to be very suceptible to thermal inactivation at a temperature above 4.deg.C. The kinetic constants obtained from Lineweaver-Burk plot based on two substate reaction mechanism showed somewhat higher value for immobilized whole cell enzyme as compared to the whole cell enzyme : the Km value for 6-APA were 7.0 mM and 12.5 mM while Km values for phenylglycine methyl ester were 4.5 mM and 8.2 mM, respectively. Using the immobilized whole cell enzyme packed in a column reactor, the productivity of ampiciline was studied by varying the flow rate of substrate solution. At the space velocity, SV, 0.14 hr$^{-1}$ the conversion was 45%. Operational stability found in terms of half life was 30 hr at SV = 0.2 hr.

• Journal of Microbiology and Biotechnology
• /
• v.2 no.1
• /
• pp.35-40
• /
• 1992

The influence of the nature of plasmids on fermentation parameters such as cell growth, cell viability, plasmid stability, and product formation has been investigated using E. coli M5248 and its recombinant derivatives M5248 [pBR322], M5248[pAS1], and M5248[pNKM21]. At a low temperature ($30^\circ{C}$), the cell growth, cell viability, and protein synthesis of the recombinants were nearly identical to those of the host cell. However, at high temperature ($42^\circ{C}$), in which transcription from the P_L$ promoter is derepressed, the recombinant cells showed decreased stability along with lower growth rates and cell viability. The ratio of total protein to cell mass was in the order of E. coli M5248>M5248[pBR322]>M5248[pAS1]>M5248[pNKM21]. It was found that transcription from the $P_L$ promoter adversely affect the plasmid maintenance and host cell metabolism even in the absence of the cloned-gene expression. Furthermore, profiles of ${\beta}$ activity were shown to vary with recombinant strains. E coli M5248[pBR322] showed highest ${\beta}-lactamase$ activity at $30^\circ{C}$, while at $42^\circ{C}\;{\beta}-lactamase$ activity was significantly reduced irrespective of the strains. The effect of the plasmid properties on plasmid-encoded gene expression has been further examined based on the relationship between $\{beta}-lactamase$ activity and plasmid-harboring cell numbers.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.11
• /
• pp.71-78
• /
• 1995

Based on the popular 4-transistor SRAM cell, an analytical expression of the minimum cell ratio was derived by modeling the static read operation. By analyzing the relatively simple expression for the minimum cell ratio, which was derived assuming the ideal transistor characteristics, effects of the changes in supply voltage and process parameters on the minimum cell ratio was predicted, and the minimum power supply voltage for read operation was determined. The results were verified by simulations utilizing the suggested simulation method, which is suitable for monitoring the lower limit of supply voltage for proper cell operation. From the analysis, it was shown that the worst condition for cell operation is low temperature and low supply voltage, and that the operation margin can be effectively improved by reducing the threshold voltage of the cell transistors.