• 제목/요약/키워드: Cell range expansion

검색결과 45건 처리시간 0.032초

Synthesis of Cardo Based Poly(arylene ether)s for Flexible Plastic Substrates and Their Properties

  • Kim, Moon-Ki;Kwon, Kyung-Jae;Han, Yang-Kyoo
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권9호
    • /
    • pp.3311-3316
    • /
    • 2011
  • New poly(arylene ether)s (PAEs) with both transparency and heat-resistance were prepared by a polycondensation of FBPODS, an ordered-sequence aromatic dihalide, and cardo typed aromatic diols containing fluorene and/or adamantane moiety and also non-cardo typed 1,5-naphthalene diol. The resulting polymers had their glass transition temperatures ranged from 202 to $247^{\circ}C$. Based on TGA data, they exhibited excellent thermal stabilities, showing 5% weight loss at $434-487^{\circ}C$. They had low thermal expansion coefficients of 58-59 ppm at temperature range of $50-200^{\circ}C$ as well as good mechanical properties with moduli of 1757-2143 MPa. The optical transmittance for the PAE films was over 70% at 550 nm, except for the PAE that contains naphthalene moiety (30% at 550 nm). They also showed water uptake of about 0.68% regardless of their chemical compositions. Therefore, the newly developed PAEs show strong potential as plastic substrates for flexible devices for display, solar cell and e-paper.

Research on Performance of LSM Coating on Interconnect Materials for SOFCs

  • Zhai, Huijuan;Guan, Wanbing;Li, Zhi;Xu, Cheng;Wang, Wei Guo
    • 한국세라믹학회지
    • /
    • 제45권12호
    • /
    • pp.777-781
    • /
    • 2008
  • Experiments were conducted using SUS430 and Crofer 22 APU steels coated by LSM using plasma spray and slurry spray methods, respectively. High-temperature conductivity and oxidation resistance were investigated. For comparison, SUS430 and Crofer 22 APU without LSM coating were also investigated and coefficient of thermal expansion (CTE) was measured. The results show that the materials without LSM coating exhibit almost the same CTE as YSZ electrolyte in a range of temperatures of $550{\sim}850^{\circ}C$. When coated with LSM, the oxidation rate of the steels decreases by $30{\sim}40%$ using slurry spray and by $10{\sim}30%$ using plasma spray whereas the steels using plasma spray have a better high-temperature conductivity than the steels using slurry spray. It is thus concluded that the LSM coating has a limited effect on increasing high-temperature conductivity while it can effectively reduce the oxidation of the steels.

비대면 환자 간호시스템 적용을 위한 융합기술의 원격 수액모니터링 장치 사용성평가 지표 개발 및 결과 분석 (Development of usability evaluation index of convergence technology remote fluid monitoring device for non-face-to-face patient nursing system application and analysis of results)

  • 김선칠
    • 한국융합학회논문지
    • /
    • 제13권4호
    • /
    • pp.137-145
    • /
    • 2022
  • 비대면 의료시스템의 확대로 간호사의 업무 경감 및 효율성을 높이기 위해서 도입되는 원격수액모니터링 장치의 사용성평가를 수행하였다. 원격 수액 모니터링은 수액 측정시술과 분석, 오차 교정기술, 전송기술 등 다양한 기술이 융복합되어 있다. 사용자가 사용하는 범위와 얻고자 하는 정보, 조절 장치 등 사용범위가 넓으며 제품을 평가하는 요소도 다양하다. 따라서 평가를 통해 제품을 개선하는데 어려움이 있다. 본 연구에서는 원격수액모니터링 시스템장치를 제품의 안정성, 조작성, 만족도의 3개 영역에서 20개의 사용성평가를 실시하여 상용화를 위한 제품개선에 도움을 주고자 정량적인 지표를 개발하였다. 적외선 방식과 로드셀 방식의 수액모니터링 장치를 통해 수행하였으며, 안정성에서는 장치의 폴대고정 등 설치작업에 대해 차이가 있었으며, 조작성과 정확성에 대해서는 높은 만족도를 나타내었다. 제품의 만족도에서는 로드셀 장치의 만족도가 대체로 높게 나타났다.

고체전해질형 연료전지용 Pr1-xMxMnO3(M-Ca, Sr) 산소극 재료의 특성 (Characteristics of Pr1-xMxMnO3(M=Ca, Sr) as a Cathode Material of Solid Oxide Fuel Cell)

  • 임형렬;정순기;이주성
    • 공업화학
    • /
    • 제7권6호
    • /
    • pp.1125-1131
    • /
    • 1996
  • 고체전해질형 연료전지의 산소극 재료로서 페롭스카이트 구조를 갖는 $PrMnO_3$에 Ca과 Sr을 도핑시켜 도핑량에 따른 전기전도도, 산소환원과전압 등의 전기화학적 특성과, 전해질인 yttria stabilized zirconia와의 반응성 그리고 열 팽창률 등을 살펴 보았다. 합성된 페롭스카이트 분말은 대략 $2{\sim}5{\mu}m$의 평균입자 크기를 나타내었는데 이때 입자크기 및 비표면적은 도핑량과 무관하였다. Ca이 30mo1% 도핑되었을 때 전기전도도는 $1000^{\circ}C$에서 $266S{\cdot}cm^{-1}$로 가장 높은 값을 나타내었고, 분극을 통해 살펴 본 산소환원특성도 Ca이 30mol% 도핑되었을 때 가장 우수한 특성을 나타내었다. 전극물질과 전해질인 YSZ를 $1200^{\circ}C$에서 100시간 동안 반응시킨 결과 $PrMnO_3$에 Sr을 도핑시켰을 때보다 Ca을 도핑시킨 것이 반응성이 훨씬 약한 결과를 나타내었다. $Pr_{0.7}Ca_{0.3}MnO_3$의 열팽창계수는 $300{\sim}1000^{\circ}C$의 영역에서 $1.19{\times}10^{-5}K^{-1}$로 측정되었고 이 값은 YSZ의 열팽창계수 $1.15{\times}10^{-5}K^{-1}$과 유사한 값이었다.

  • PDF

Ultrastructural changes of Haematococcus pluvialis (Chlorophyta) in process of astaxanthin accumulation and cell damage under condition of high light with acetate

  • He, Bangxiang;Hou, Lulu;Zhang, Feng;Cong, Xiaomei;Wang, Zhendong;Guo, Yalin;Shi, Jiawei;Jiang, Ming;Zhang, Xuecheng;Zang, Xiaonan
    • ALGAE
    • /
    • 제35권3호
    • /
    • pp.253-262
    • /
    • 2020
  • Haematococcus pluvialis is a commercial microalga that can produce high quantities of astaxanthin. Under induced conditions, some important changes in the subcellular structures related to astaxanthin accumulation were observable. For example, a large number of astaxanthin granules, oil structures and starch granules appeared in the thick-walled cells; Astaxanthin granules gradually dissolved into the oil structures and spread throughout the entire cell with the fusion and diffusion process of oil structures during the middle and late stages of induction; The plastoglobules were closed to the newly formed structures, and some plastoglobules would abnormally increase in size under stress. Based on observations of cell damage, the degradation of membrane structures, such as chloroplasts, was found to be the primary form of damage during the early stage of induction. During the middle stage of induction, some transparent holes were exposed in the dissolving astaxanthin granules in the cytoplasm. In thick-walled cells, these transparent holes were covered by oil substances dissolving astaxanthin, thereby avoiding further damage to cells. Given the relatively few oil structures, in non-thick-walled cells, the transparent holes expanded to form multiple transparent areas, eventually resulting in the rupture and death of cells. These results suggested that the high level of synthesis and the wide range diffusion of oil explained the expansion of astaxanthin in H. pluvialis.

오픈 소스 기반의 아두이노를 이용한 건조기 내 유기 시료의 실시간 수분측정 모니터링에 관한 연구 (A Study on Real-Time Monitoring for Moisture Measurement of Organic Samples inside a Drying Oven using Arduino Based on Open-Source)

  • 김정훈
    • 벤처혁신연구
    • /
    • 제5권2호
    • /
    • pp.85-99
    • /
    • 2022
  • 시판되고 있는 실험용 및 산업용 건조기는 일반 드라이오븐, 열풍 순환 건조기, 진공건조기, 동결건조기 등으로 구분되고 기능, 크기 및 용량 등에 따라 그 종류도 다양하다. 그러나 제품의 품질 제어 및 성능 개선을 위해 중요한 요소인 수분측정이 적용되지 않아 현재는 건조 종료 후 임의로 중량을 칭량하기 때문에 매우 수동적이다. 일반적으로 수분을 측정하기 위한 방법은 직접적인 측정법과 간접적인 측정법으로 구분되고 수분 분리 전.후의 질량 또는 부피 변화와 같은 직접적인 측정법이 주로 이용된다. 상대적으로 열전도도, 마이크로파 등과 같은 간접적인 측정법은 측정 장비를 활용하기 때문에 적용이 제한적이다. 본 연구에서는 오픈소스 기반의 아두이노를 이용하여 비교적 손쉽게 수분측정 시스템을 설계하여 외부 환경요인에 영향 받지 않고 수분 변화량 및 무게 변화를 실시간으로 모니터링 하였다. 구체적으로 수분 민감도 물질 및 식품 건조에 적합한 60℃와 80℃에서 작동할 수 있는 온.습도 및 로드셀 측정 센서를 건조기 내부에 패키징하여 각종 변화량을 측정하였다. 또한 바나나, 배, 톱밥의 유기 시료를 이용한 반복적인 실험을 통해서도 건조시간 및 온도에 따른 증발율 변화와 로드셀 측정값에 있어 안정적인 응답특성을 나타냄으로써 성능 안전성을 확보할 수 있었다. 향후 온.습도 범위의 확대와 CFD(Computational Fluid Dynamics) 프로그램과의 비교 분석을 통해 신뢰도를 더욱 향상시킬 수 있을 것으로 판단된다.

Buongiorno의 비균질 모델을 사용한 나노유체의 층류 자연대류 해석 (COMPUTATION OF LAMINAR NATURAL CONVECTION OF NANOFLUID USING BUONGIORNO'S NONHOMOGENEOUS MODEL)

  • 최석기;김성오;이태호
    • 한국전산유체공학회지
    • /
    • 제18권4호
    • /
    • pp.25-34
    • /
    • 2013
  • A numerical study of a laminar natural convection of the CuO-water nanofluid in a square cavity using the Buongiorno's nonhomogeneous model is presented. All the governing equations including the volume fraction equation are discretized on a cell-centered, non-uniform grid employing the finite-volume method with a primitive variable formulation. Calculations are performed over a range of Rayleigh numbers and volume fractions of the nanopartile. From the computed results, it is shown that both the homogeneous and nonhomogeneous models predict the deterioration of the natural convection heat transfer well with an increase of the volume fraction of nanoparticle at the same Rayleigh number, which was observed in the previous experimental studies. It is also shown that the differences in the computed results of the average Nusselt number at the wall between the homogeneous and nonhomogeneous models are very small, and this indicates that the slip mechanism of the Brown diffusion and thermophoresis effects are negligible in the laminar natural convection of the nanofluid. The degradation of the heat transfer with an increase of the volume fraction of the nanoparticle in the natural convection of nanofluid is due to the increase of the viscosity and the decrease of the thermal expansion coefficient and the specific heat. It is clarified in the present study that the previous controversies between the numerical and experimental studies are owing to the different definitions of the Nusselt number.

쌀가루의 수분함량과 입자크기에 따른 Extrudate 의 물성학적 성질 (Effects of Moisture Content and Particle Size of Rice Flour on the Physical Properties of the Extrudate)

  • 류기형;이철호
    • 한국식품과학회지
    • /
    • 제20권4호
    • /
    • pp.463-469
    • /
    • 1988
  • 쌀가루의 압출성형 특성을 조사하기 위하여 원료의 수분합량과 입자크기를 달리하여 자가발열형 single screw extruder로 처리하고 이때 온도변화에 따른 extrudate의 물성학적인 성질을 비교하였다. 원료의 수분함량은 17%, 19%, 22%, 25%, 28%로 했고 입자크기는 18-60mesh와 60-120mesh의 두 범위로 했다. 내부흐름의 온도는 자동 온도기록계에 기록되게 하여 정상상태 가동이 될 때까지 경시적으로 시료를 채취하였다. 팽화율은 수분함량과 입자크기가 감소함에 따라 증가하였으며, bulk density는 팽화율과 역상관 관계를 나타내었다. Extrudate의 절단력은 수분함량이 적고 입자조기가 감소함에 따라 낮아졌으며 기공의 크기도 균일하였다. 색도는 수분함량과 입자크기가 증가함에 따라 명도는 증가하였고 황색도는 감소하였다. 겉보기 점도는 수분함량이 증가함에 따라 증가했고, 수용성 지수는 감소하였다. 원료의 수분이 감소함에 따라 일부의 전분은 호정화를 유발하는 것으로 판단되었다.

  • PDF

Vibrio harveyi에서 분리한 extracellular products (ECPs)의 특성과 독성 (Characterization and pathogenicity of extracellular products (ECPs) of Vibrio harveyi)

  • 최정현;원경미;하수진;김이청;변순규;이배익;이종하;허민도;박수일
    • 한국어병학회지
    • /
    • 제21권2호
    • /
    • pp.81-91
    • /
    • 2008
  • Vibrio harveyi, one of the major causal agent of vibriosis, affects a diverse range of marine vertebrates and invertebrates over a wide geographical area. The aims of this study were to investigate the characteristics of extracellular products (ECPs) from an isolate of the pathogenic non‐luminous V. harveyi and the luminous V. harveyi. And ECPs of V. harveyi were examined the pathogenicity to the black rockfish, Sebastes schlegeli, and histopathological traits of internal organs injected by ECPs. Four strains of V. harveyi cultures produced ECPs showing various enzymatic activites (caseinase, gelatinase, phospholipase, lipase, haemolysin). The ECPs showed strong cytotoxicity on macrophages of black rockfish, Sebastes schlegeli and olive flounder, Paralichthys olivaceus. Especially, the virulence of ECPs from the isolate of V. harveyi FR 2 was higher in the intraperitoneally injected black rockfish. Also, the ECPs of V. harveyi FR 2 caused the expansion of sinusoids in the liver, the activation of ellipsoid in the spleen and the sloughing of the epidermal cell in the intestine. It was suggested that the ECPs from V. harveyi play an important role in the pathogenicity process of the V. harveyi.

수소충전소용 유량제어 밸브의 차압에 따른 유동특성에 대한 수치해석적 연구 (A Numerical Study Of Flow Control Valve to Flow Characteristics by Pressure Difference for Hydrogen Station)

  • 남충우;김락민;김현효
    • 한국가스학회지
    • /
    • 제25권2호
    • /
    • pp.28-33
    • /
    • 2021
  • 최근 친환경 자동차에 대한 관심이 높아짐에 따라 공해물질을 배출하지 않는 수소연료전지 차량에 대한 관심과 구매가 증가하고 있다. 최근 정부의 수소에너지 보급정책에 따라 수소충전소의 확충과 핵심부품의 국산화를 지원하고 있다. 본 연구에서는 그중에서도 수소 유량제어 밸브의 차압에 따른 유동특성을 연구하였다. 차압이 높아 짐에 따라 질량유량과 유량계수는 체적유량과 다른 경향을 보임을 확인하였다. 그리고 병목 구간에서의 노즐효과로 인해 수소온도에 영향을 주게되고, 밀도의 변화를 일으켜 질량유량에 영향을 주게 되는 것을 확인 하였다.