• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.2
• /
• pp.14-19
• /
• 2013

The size and distribution of residual stresses and the effect of the minimum mesh size were investigated by the a-Si thin film solar cell. Attributed to the difference in coefficient of thermal expansion of the a-Si and Ag concentrated residual stresses at the joint interface of dissimilar materials. The ${\sigma}y$ and ${\tau}xy$ didn't appear in the central part, but ${\sigma}x$ existed. However, ${\sigma}x$, ${\sigma}y$ and ${\tau}xy$ appeared in the edge part and concentrated residual stresses at the interface between a-Si and Ag. Minimum mesh size gets smaller, the concentration of ${\sigma}y$ was significantly and existence area was reduced. As a result, the failure of thin film solar cells during the cutting process can be explained by the residual stresses.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.1
• /
• pp.34-40
• /
• 2015

A stack in the proton exchange membrane fuel cell (PEMFC) consists of bipolar plates, a membrane electrode assembly, a gas diffusion layer, a collector and end plates. High current density is usually obtainable partially from uniform temperature distribution in the fuel cell. A size optimization method considering the thermal expansion effect of stacked plates was developed on the basis of finite element analyses. The thermal stresses in end, bipolar, and cooling plates were calculated based on temperature distribution obtained from thermal analyses. Finally, the optimization method was applied and optimum thicknesses of the three plates were calculated considering both fastening bolt tension and thermal expansion of each unit cell (72 cells, 5kW). The optimum design considering both thermal and mechanical loads increases the thickness of an end plate by 0.64-0.83% the case considering only mechanical load. The effect can be enlarged if the number of stack increases as in an automotive application to 200-300 stacks.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.8
• /
• pp.4621-4625
• /
• 2013

The purpose of this study was to construct a protein-protein interaction (PPI) network related to oral squamous cell carcinoma (OSCC). Each protein was ranked and those most associated with OSCC were mined within the network. First, OSCC-related genes were retrieved from the Online Mendelian Inheritance in Man (OMIM) database. Then they were mapped to their protein identifiers and a seed set of proteins was built. The seed proteins were expanded using the nearest neighbor expansion method to construct a PPI network through the Online Predicated Human Interaction Database (OPHID). The network was verified to be statistically significant, the score of each protein was evaluated by algorithm, then the OSCC-related proteins were ranked. 38 OSCC related seed proteins were expanded to 750 protein pairs. A protein-protein interaction nerwork was then constructed and the 30 top-ranked proteins listed. The four highest-scoring seed proteins were SMAD4, CTNNB1, HRAS, NOTCH1, and four non-seed proteins P53, EP300, SMAD3, SRC were mined using the nearest neighbor expansion method. The methods shown here may facilitate the discovery of important OSCC proteins and guide medical researchers in further pertinent studies.

• Korean Institute of Interior Design Journal
• /
• v.23 no.1
• /
• pp.88-95
• /
• 2014

This study intended arousal of other viewpoints that deal with and understand spaces and shapes, by describing the concept of 'dimensions' into visual patterns. Above all, the core concept of spatial dimensions was defined as 'expandability'. Then, first, the 'golden ratio', 'Fibonacci sequence', and 'fractal theory' were defined as elements of each dimension by stage. Second, a 'unit cell' of one dimension as 'minimum unit particles' was set. Next, Fibonacci sequence was set as an extended concept into two dimensions. Expansion into three dimensions was applied to the concept of 'self-similarity repetition' of 'Fractal'. In 'fractal dimension', the concept of 'regularity of irregularity' was set as a core attribute. Plus, Platonic solids were applied as a background concept of the setting of the 'unit cell' from the viewpoint of 'minimum unit particles'. Third, while 'characteristic patterns' which are shown in the courses of 'expansion' of each dimension were embodied for the visual expression forms of dimensions, expansion forms of dimensions are based on the premise of volume, directional nature, and concept of axes. Expressed shapes of each dimension are shown into visually diverse patterns and unexpected formative aspects, along with the expression of relative blank spaces originated from dualism. On the basis of these results, the 'unit cell' that is set as a concept of theoretical factor can be defined as a minimum factor of a basic algorism caused by other purpose. In here, by applying diverse pattern types, the fact that meaning spaces, shapes, and dimensions can be extracted was suggested.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.183-189
• /
• 2018

This paper proposes distributed file placement and coverage expansion techniques for mitigating the traffic bottleneck in backhaul for small-cell networks. In order to minimize the backhaul load with limited memory space, the proposed scheme controls the coverage and file placement of base station according to file popularity distribution and memory space of base stations. In other words, since the cache hit ratio is low when there is small memory capacity or widespread file popularity distribution, the base stations expand its coverage and cache different set of files for the user located in overlapped area to exploit multiple cached file sets of base stations. Our simulation results show that the proposed scheme outperforms the conventional cache strategy in terms of network throughput when there is small memory capacity or widespread file popularity distribution.

• Journal of Convergence for Information Technology
• /
• v.10 no.6
• /
• pp.164-176
• /
• 2020

Efficient production of antigen specific cytotoxic T cells is critical for appropriate adoptive immune response. In vitro culture and expansion of human T lymphocyte clones are very sophisticated and subtle procedure in immune cell therapy and hard to control. Therefore, many groups devoted their efforts to manipulate artificial antigen presenting cells (aAPCs) that can induce T cell activation and clonal expansion. To mimicking of natural antigen-presenting cells, aAPCs encompass basic signal molecules required for T cell activation: MHC:antigen complexes, co-stimulatory molecules and soluble immune modulating molecules. Orchestrated organization of these molecules is important for efficient T cell activation. Here, we discuss how those molecules have been incorporated in several aAPC models, but also how physical properties od aAPC are important for interaction with T cells.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.5
• /
• pp.280-292
• /
• 2014

Recently, heterogeneous networks consisting of small-cells on top of traditional macro-cellular network has attracted much attention, because traditional macro-cellular network is not suitable to support more demanding mobile data traffic due to its limitation of spatial reuse. However, due to the transmit power difference between macro- and small-cells, most users are associated with macro-cells rather than small-cells. To solve this problem, enhanced inter-cell interference coordination (eICIC) has been introduced. Particularly, in eICIC, the small-cell coverage is forcibly expanded to associate more users with small-cells. Then, to avoid cross-tier interference from macro-cells, these users are allowed to receive the data during almost blank subframe (ABS) in which macro-cells almost remain silent. However, this approach is not sufficient to balance the load between macro- and small-cells because it only expands the small-cell coverage. In this paper, we propose a load balance scheme improving proportional fairness for heterogeneous networks employing eICIC. In particular, the proposed scheme combines the greedy-based user association and the ABS rate determination in a recursive manner to perform the load balance.

• IMMUNE NETWORK
• /
• v.24 no.2
• /
• pp.14.1-14.26
• /
• 2024

The inflammatory response during cutaneous leishmaniasis (CL) involves immune and non-immune cell cooperation to contain and eliminate Leishmania parasites. The orchestration of these responses is coordinated primarily by CD4⁺ T cells; however, the disease outcome depends on the Th cell predominant phenotype. Although Th1 and Th2 phenotypes are the most addressed as steers for the resolution or perpetuation of the disease, Th17 cell activities, especially IL-17 release, are recognized to be vital during CL development. Th17 cells perform vital functions during both acute and chronic phases of CL. Overall, Th17 cells induce the migration of phagocytes (neutrophils, macrophages) to the infection site and CD8⁺ T cells and NK cell activation. They also provoke granzyme and perforin secretion from CD8⁺ T cells, macrophage differentiation towards an M2 phenotype, and expansion of B and Treg cells. Likewise, immune cells from the inflammatory infiltrate have modulatory activities over Th17 cells involving their differentiation from naive CD4⁺ T cells and further expansion by generating a microenvironment rich in optimal cytokines such as IL-1β, TGF-β, IL-6, and IL-21. Th17 cell activities and synergies are crucial for the resistance of the infection during the early and acute stages; however, if unchecked, Th17 cells might lead to a chronic stage. This review discusses the synergies between Th17 cells and the inflammatory infiltrate and how these interactions might destine the course of CL.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.68-68
• /
• 2010

To reduce PV manufacturing costs, the thickness of solar cell is getting thinner. Bow is shown after cooling down the temperature of solder cell. It happens because of different thermal expansion coefficients of different metals. Bowed cell can make micro crack while module processing and it can drop off efficiency of PV module. As thinner solar cell is produced, the thickness of ribbon should be concerned to prevent extra bow. In this paper we investigate the contrast of deflection when we solder different thickness of ribbons on same solar cell. This approach would help to find out the optical thickness of ribbon for particular thickness of solar cell later on.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.6
• /
• pp.806-813
• /
• 2012

Adipocyte differentiation is strongly associated with obesity, which causes metabolic disorders. In this study, we investigated the inhibitory effects of widdrol on 3T3-L1 preadipocyte growth and differentiation. Widdrol decreased lipid droplet accumulation and down-regulated adipogenic transcription factors such as C/$EBP{\alpha}$, C/$EBP{\beta}$, and $PPAR{\gamma}$. Widdrol blocked preadipocyte proliferation and differentiation through the inhibition of mitotic clonal expansion, which was accompanied by the failure of degradation of p21, a cyclin-dependent kinase inhibitor. Cell-cycle analysis clearly indicated that widdrol actively induces cell-cycle arrest at the G1-S phage transition, causing cells to remain in the preadipocyte state. Moreover, widdrol increased p21 expression and inhibited Rb phosphorylation in preadipocyte incubated in a hormone medium. Therefore, these findings clearly suggest that widdrol blocks preadipocyte growth and differentiation through the inhibition of mitotic clonal expansion by p21-and Rb-dependent G1 arrest and can be developed as a potent anti-adipogenic agent for reducing obesity.