• 기술사
• /
• 제15권1호
• /
• pp.36-40
• /
• 1982

This study is to characterize Ago stability useful for manufacturing silver oxide button cell, and deter mined by test tube gassing evaluations and by cell expansion and further discuss en the effectiveness of pellet reduction treatments to obtain single plateau discharge Profile and relevent performance.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.133-136
• /
• 2007

Perovskite-structured samarium strontium cobaltite (SSC), which is mixed ionic electronic conductor (MIEC), is considered as a promising cathode material for intermediate temperature-operating solid oxide fuel cell (SOFC) due to its high electrocatalytic property. Cathode material containing cobalt (Co) is unstable at high temperature and has a relatively high thermal expansion property. In this paper, Sm-Sr-(Co,Fe,Ni)-O system with perovskite and spinel structures was investigated in terms of electrochemical property and thermal expansion property, respectively. Area specific resistance (ASR) was measured by ac impedance spectroscopy to investigate the electrochemical property of cathode, and thermal expansion coefficient (TEC) was measured by using dilatometer. Micro structure of cathode was observed by scanning electron microscopy. Perovskite-structured $Sm_{0.5}Sr_{0.5}CoO_{3-\delta}$ showed the ASR of $0.87{\Omega}/cm^{2}$, and $Sm_{0.5}Sr_{0.5}NiO_{3-\delta}$, which actually has a spinel structure, showed the lowest TEC value of $13.3{\times}10^{-6}/K$.

• Journal of Information Display
• /
• 제1권1호
• /
• pp.14-19
• /
• 2000

Due to distinct properties of plastic substrates such as poor thermal resistance, non-rigidness and high thermal expansion, it is difficult to fabricate plastic film LCDs by conventional LCD processes. Poor thermal resistance and high thermal expansion of substrates induced deformation of substrates surface, mismatch of thermal expansion between ITO electrodes and substrates resulted in defects in the ITO electrodes during the high temperature process. Defects of ITO electrodes and non-uniform cell gap caused by non-rigid and flexible properties were also observed in the pressuring process. Based on in these observations, we used a newly developed material and fabrication process to prevent deformation of substrates, defects of electrodes and to maintain uniform cell gap. The maximum temperature of the process is limited up to $110^{\circ}C$ and pressure loaded during the process is five times less than conventional one. With these invented processes and materials, we obtained highly reliable Plastic Film STN LCDs whose electro-optical characteristics are better than or equivalent to those of typical glass LCDs.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.430-438
• /
• 2021

The spatial distribution of neutron flux or reaction rate was calculated by cell or mesh tally in traditional Monte Carlo simulation. However, either cell or mesh tally leads to the increase of memory consumption and simulation time. In this paper, the function expansion tally (FET) method was developed in Reactor Monte Carlo code RMC to solve this problem. The FET method was applied to the tallies of neutron flux distributions of uranium block and PWR fuel rod models. Legendre polynomials were used in the axial direction, while Zernike polynomials were used in the radial direction. The results of flux, calculation time and memory consumption of different expansion orders were investigated, and compared with the mesh tally. Results showed that the continuous distribution of flux can be obtained by FET method. The flux distributions were consistent with that of mesh tally, while the memory consumption and simulation time can be effectively reduced. Finally, the convergence analysis of coefficients of polynomials were performed, and the selection strategy of FET order was proposed based on the statistics uncertainty of the coefficients. The proposed method can help to determine the order of FET, which was meaningful for the efficiency and accuracy of FET method.

• Archives of Pharmacal Research
• /
• 제15권3호
• /
• pp.234-238
• /
• 1992

Using cell-free extract of Lysobacter lactamgenus, enzymatic conversion of $\delta$-L-($\alpha$-aminoadiphyl)-L-cysteinyl-D-valine (ACV) the first substrate of $\beta$-lactam biosynthesis, into antibiotic compounds was attempted. In high performance liquid chromatographic (HPLC) analysis, the biosynthetic intermediates for cephalosporin antibiotics including isopenicillin N, deacetoxycephalosporin C, deacetylcephalosporin C and unknown cephem compound were detected in reaction mixtures. It implies that cephabacin compounds from L lactamgenus could be produced by biosynthetic routes through penicillin ring formation and its expansion to cephalosporin ring, likely as cephalosporin C from Cephalosporium or cephamycin C from Streptomyces. Among biosynthetic enzyme in cell-free extract, the ring formation activity (isopenicillin N synthetase activity) was separated in 50-60% of ammonium sulfate fraction, and ring expansion activity (deacetoxycephalosporin C synthetase activity) was found to be in 40-50% fraction. The partially purified isopenicillin N synthetase could convert as much as 90% ACV to isopenicillin N during 6-hour reaction.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.134-136
• /
• 2005

Homogenization method is adopted to predict the permeability tenor for glass fiber plain woven fabrics. Calculating the permeability tensor numerically is an encouraging task because the permeability tensor is a key parameter in resin transfer molding (RTM). Based on multi-scale approach of the homogenization method, the permeability for the micro-unit cell within fiber tow is computed and compared with that obtained from flow analysis for the same micro-unit cell. It is found that they are in good agreement. In order to calculate the permeability tensor of macro-unit cell for the plain woven fabrics, the Stokes and Brinkman equations which describe inter-tow and intra-tow flow respectively are employed as governing equations. The effective permeabilities homogenized by considering intra-tow flow are compared with those obtained experimentally. Control volume finite element method (CVFEM) is used as a numerical method. It is shown that the asymptotic expansion homogenization method is an attractive method to predict the effective permeability for heterogeneous media.

• 청정기술
• /
• 제14권4호
• /
• pp.248-255
• /
• 2008

초임계이산화탄소의 존재 하에서 세 가지 이온성액체(IL)의 부피팽창을 압력 32 MPa까지, 온도 313.15에서 333.15 K까지 뷰셀(view cell) 내에서 측정하였다. 이미다졸유도체 이온성액체인 육불화 1-부틸-3-메틸이미다졸([bmim][$PF_6$]), 사불화 1-부틸-3-메틸이미다졸([bmim][$BF_4$]), 사불화 1-옥틸-3-메틸이미다졸([omim][$BF_4$])을 연구에 사용하여, 압력, 온도, 양이온과 음이온의 성질, 그리고 수분 함량이 $CO_2$의 흡수에 의한 이온성액체의 부피팽창에 미치는 영향을 실험적으로 조사하였다. 부피팽창은 긴 양이온 알킬그룹을 가지고 있는 이온성액체 및 음이온 극성이 작은 이온성액체에서 크게 나타났다. 수분함량이 적을수록, 온도가 낮을수록, 그리고 압력이 높을수록 이온성액체상의 부피는 더 크게 나타났다.

• Clinical and Experimental Reproductive Medicine
• /
• 제25권1호
• /
• pp.9-16
• /
• 1998

This study was performed to investigate the stimulating effect on oocyte maturation and cumulus cell expansion in TC199 media by human cord serum (HCS) supplementation. Immature mouse oocyte cumulus complexes (OCCs) were cultured in TC199 media supplemented with bovine serum albumin (BSA), HCS and human chorionic gonadotropin (hCG) instead of luteinizing hormone (LH) respectively, and the expression of cumulus expansion and oocyte maturation were observed. After 4hr and 24hr culture with or without OCCs, media containing 0.4% BSA, 10% HCS and 10 IV hCG respectively were collected and analyzed for changing concentrations of estradiol $(E_2)$, progesterone $(P_4)$, testosterone (T), and $PGF_{2\alpha}$. There were no elevation of $E_2$, T, and $PGF_{2\alpha}$ by OCCs culture, but minute elevation of $P_4$ level by 24hr OCCs culture in hCG supplementation (p=0.048). The stimulating pattern of cumulus expansion of OCCs by HCS and hCG supplementation was similar to our previously report using Ham's F-10 media, however oocyte maturation rates after 24hr OCCs culture in all media were increased by $20\sim30%$ compared to Ham's F-10 media. These results suggest that LH in HCS induce cumulus expansion probably by $P_4$ secretion of OCCs, and TC199 is efficient media for immature mouse oocyte maturation.

• 한국지반공학회논문집
• /
• 제18권2호
• /
• pp.137-146
• /
• 2002

본 연구에서는 국내 해성퇴적 연약지반의 압밀특성을 실험적으로 규명하기 위하여 현장에서의 픽에조콘을 이용한 간극수압소산시험을 수행하고 동일한 위치와 심도에서 채취한 비교란시료를 이용하여 실내에서 Howe cell 압밀시험을 포함한 역학시험과 물성시험을 수행하였다. 이를 근거로 howe cell 압밀시험으로부터 구한 수평압밀계수$(c_r)$와 피에조콘 소산시험으로부터 구한 압밀도 50%에 해당하는 소산시간$(t_{50})$의 관계를 회귀분석을 통하여 실험식을 제안하였으며 이 실험식과 기존의 여러 학자들에 의해 제안된 이론해와의 관계를 비교하였다. 이에 의하면 실린더형 공동팽창이론에 근거한 Torstensson(1977)의 이론해와 변형률경로법에 근거한 Houlsby와 Teh(1988)의 이론해에 비교적 유사한 경향을 보이는 것으로 나타났다

• 한국표면공학회지
• /
• 제48권1호
• /
• pp.23-26
• /
• 2015

What causes the transformation of a solar cell is the behavior difference of thermal expansion occurred between the substrate and the layer of semiconductor used in the solar cell. Therefore, the substrate has to possess a behavior of thermal expansion that is similar with that of semiconductor layer. This study employed electroforming to manufacture Fe-Ni alloy materials of different compositions. To verify the result from a finite element analysis, a two-dimensional Mo substrate was calculated and its verification experiment was conducted. The absolute values from the finite element analysis of Mo/substrate structure and its verification experiment showed a difference. However, the size of residual stress of individual substrate compositions had a similar tendency. Two-dimensional CIGS/Mo/$SiO_2$/substrate was modeled. Looking into the residual stress of CIGS layer occurred while the temperature declined from $550^{\circ}C$ to room temperature, the smallest residual stress was found with the use of Fe-52 wt%Ni substrate material.