• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.7
• /
• pp.473-479
• /
• 2015

Hybrid supercapacitors with high power density and long cycle life are widely used for emergency power source of LED emergency luminaires. In this paper, we designed and fabricated a hybrid capacitor cell and a module for the LED emergency luminaires. Using hybrid supercapacitor cells (1,000 F, 2.8 V), we designed a module in a 10-year warranty considering aging and ESR. Considering the ESR and efficiency has been designed to module with 1,000 F 5.6 V design results in 2 series and 2 parallel combination. Module was used to confirm that the operation 77.5 minutes at room temperature, discharge LED emergency luminaires with 2 W. As a LED emergency luminaires of emergency power supply that we can support more than 10 years of life was confirmed the applicability of hybrid supercapacitor.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.96.1-96
• /
• 2003

Serratia plymuthim A21-4 strongly inhibits the mycelial growth, zoospore formation, and cystospore germination of Phytophthor spp and Pythium species. The bacterial isolate produced antifungal substance and chitinase. The bacteria also enhanced to plant growth remarkably in low nutritional condition. The application of cell suspension of A21-4 to pepper seedlings in greenhouse experiments and soil drenching in farmer's field was proved successfully to control the phythophthora blight of pepper. For the effective control, however, relatively high density of cell number(10$\^$9/cfu/$m\ell$) is required. Density effect was similar in plant growth promoting activity of A21-4. Though this investigation we improved the problem with changes of culture condition of bacteria and some nutritional amendment.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.6
• /
• pp.537-544
• /
• 2001

In the present study, tin-zinc alloys were coated on a cold-rolled steel sheet with variations of electrolyte concentration, additives quantity and current density employing the Hull cell and circulation cell simulator. With an addition of additives of 2m1/L, tin-zinc deposits containing 10 to 40 percent Zn revealed a good surface appearance with weak acidic electrolytes. The organic additives suppressed the Sn deposition rate and thus increased the zinc contents in tin-zinc coating layers. The zinc contents in the tin-zinc coating layers depended almost linearly on the concentrations of metal ions of tin and zinc. Temperature of the electrolyte affected the composition tin-zinc coating layer. However, the concentration of complexants revealed little effectiveness. The surface morphology of tin-zinc coating showed dense tin and zinc phases with fine equiaxed grains with the high current density.

• Journal of Biosystems Engineering
• /
• v.23 no.5
• /
• pp.473-480
• /
• 1998

This study was performed to analyze the variation of various physicochemical factors related to the freshness of apple and tomato during post-harvest period. The total soluble solids content, uronic acid content, cell surface roughness. density, rupture deformation and rupture force were measured for 39 days at 7-day intervals for apple and for 11 days at 2-day intervals for tomato. respectively. The cell surface roughness of apple increased with the elapsed time, while the rupture force decreased. In case of tomato, uronic acid content, density and rupture deformation increased with the elapsed time whereas the rupture force decreased. Both apple and tomato exhibited the significant correlations among those physicochemical factors.

• Applied Microscopy
• /
• v.23 no.1
• /
• pp.25-34
• /
• 1993

Prolactin has been reported to be present in the tear film of humans and prolactin-like immunoreactivity has been detected by immunofluorescence in acinar cells of the lacrimal glands of humans and rats. The present study was aimed at clarifying the intracellular distribution of the prolactin-like immunoreactivity, using the electron microscope immunogold technique. The lacrimal gland acinar cells have two types of secretory granules: 1) Secretory granules containing flocculent materials irregularly shaped and are often coalesced. 2) Secretory granules are fairly round and contain homogenous materials of a moderate electron density. The density of the granular content varies even within a single cell. We found prolactin-like reactivity in secretory granules, some smaller cytosolic vesicles, Golgi cisternae and nuclei in acinar cells from intact glands of rat. Our present results are consistent with the conclusion that prolactin is present in lacrimal cells. The presence of prolactin reactivity in the nucleus suggests that prolactin may be a regulatory factor modulating gene expression.

• Journal of the Korean Mathematical Society
• /
• v.51 no.3
• /
• pp.635-654
• /
• 2014

We consider the Cauchy problem for a Keller-Segel-fluid model with degenerate diffusion for cell density, which is mathematically formulated as a porus medium type of Keller-Segel equations coupled to viscous incompressible fluid equations. We establish the global-in-time existence of weak solutions and bounded weak solutions depending on some conditions of parameters such as chemotactic sensitivity and consumption rate of oxygen for certain range of diffusive exponents of cell density in two and three dimensions.

• Journal of Oral Medicine and Pain
• /
• v.12 no.1
• /
• pp.17-26
• /
• 1987

In order to investigate the biostimulatory effect of low power density laser radiation in vitro, human gingival fibroblasts were cultured in MEM in which experiment groups respectively were made to 30 sec, 60 sec and 90 sec group. The experiments were performed by cell count, DNA and protein content measurements after experimental groups were irradiated with GaAlAs laser every day by forth day and then control group and experimental groups were compared. The results were as follows: 1. Cell counts of experimental groups were increased with exposure time, but showed no significance (P>0.05). 2. When the protein contents were compared, there was a very significant increase in 90 sec. experimental group (P<0.01). 3. When the DNA contents were compared, there was a significant difference only between control and 70 sec. group (P<0.05).

• KSBB Journal
• /
• v.29 no.3
• /
• pp.220-224
• /
• 2014

Flocculation is known one of the effective methods for harvesting microalgae. This study was aimed to optimize the flocculation condition for decreasing the amounts of flocculant and obtaining the highest yield of algal biomass. To achieve this goal, it was optimized the flocculant concentration, reaction pH and the concentration of cell density for harvest using response surface methodology (RSM). The flocculation of microalgae, Spirogyra varians, was carried out using inorganic flocculant polyaluminium chloride. By the RSM result, the optimal flocculation condition was calculated 5 ppm of polyaluminum chloride, pH 7.5 and 0.33 of optical cell density at $OD_{640}$. The obtained recovery yield of S. varians was 97.6% at the optimal condition.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.3
• /
• pp.209-216
• /
• 2008

In the present study, a mathematical model has been formulated for the performance of polymer electrolyte fuel cells. Modify the concentration polarization equation using concentration coefficient that represents the characteristics of bipolar plate reactant distribution. The model predictions have been compared with experimental results and good agreement has been demonstrated for the cell polarization curves. The effects of operating parameters on the performance of fuel cells have been studied. Increases of operation pressure reduce the effect of temperature on the performance.

• Carbon letters
• /
• v.16 no.3
• /
• pp.198-202
• /
• 2015

Carbon-supported Pt catalyst systems containing defect adsorption sites on the anode of direct methanol fuel cells were investigated, to elucidate the mechanisms of H₂ dissociation and carbon monoxide (CO) poisoning. Density functional theory calculations were carried out to determine the effect of defect sites located neighboring to or distant from the Pt catalyst on H₂ and CO adsorption properties, based on electronic properties such as adsorption energy and electronic band gap. Interestingly, the presence of neighboring defect sites led to a reduction of H₂ dissociation and CO poisoning due to atomic Pt filling the defect sites. At distant sites, H₂ dissociation was active on Pt, but CO filled the defect sites to form carbon π-π bonds, thus enhancing the oxidation of the carbon surface. It should be noted that defect sites can cause CO poisoning, thereby deactivating the anode gradually.