• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.11
• /
• pp.1118-1127
• /
• 2008

The position and size of holes in the partition of a double cavity are known to strongly affect the eigenfrequency of the longitudinal eigenmodes of the double cavity. To maximize or minimize the eigenfrequency of the hole-partitioned double cavity, two acoustical topology optimization problems are formulated and solved. While two sub-cavities are filled with air, a partition between them is assumed to consist of sub-partitions of variable acoustical properties. One design variable is assigned to each sub-partition, whose material properties are interpolated as those of an intermediate material between air and a rigid body. The penalty parameter of the used interpolation function is adjusted to obtain a distinct air and rigid body distribution at the converged stage in each acoustical topology optimization problem. A special attention is paid to the selection of initial values of design variables to obtain solutions as close to global optimum and symmetric as possible. To show numerical characteristics of these optimization problems, the formulated problems are first solved for the one-dimensional partition design domain and then for the two-dimensional partition design domain.

• Korean Journal of Veterinary Research
• /
• v.36 no.2
• /
• pp.289-296
• /
• 1996

A case of schistosomus reflexes in Korean native female calf was observed macroscopically and radiographically. The results were summarized as follows. 1. The abdominal visceral organs were exposed. 2. The vertebral column bent laterally to the left, and the sacrum approached to the cranium by reflected caudal lumber vertebrae, presenting S-shaped lateral twisting of the vertebrae. 3. The right ribs reflected laterally and dorso-cranially from the 7th rib to 13th rib. The left ribs bent caudally from 8th rib to 13th rib. 4. The length of rudimentary 6th right rib was one half of normal size and the 7th right rib was one third. 5. The sternum was bifid split from the fourth sternebra through the xyphoid cartilage. 6. The diaphragm was intact and thoracic cavity was reduced in size. The lung and heart severely deformed in shape and size. 7. The liver markedly deformed in shape and thickness. 8. The pelvic cavity was reduced in size by compression laterally to the left. 9. The uterus horn, ovary, urinary bladder, and urethra were severely deformed in the shape and position.

• Korean Journal of Optics and Photonics
• /
• v.14 no.1
• /
• pp.92-96
• /
• 2003

Dielectric apertures in vertical cavity laser have been used for improved device performance. Numerical analysis is used to estimate the optical losses as the aperture diameter is reduced. The optical losses depend on the aperture size, thickness and location. The optical loss strongly depend on the aperture size and thickness when the aperture size is similar or smaller than the emitted wavelength. The optical loss is negligible and not depend on the aperture thickness when the aperture size is larger than 5 times emitted wavelength.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.2
• /
• pp.92-100
• /
• 2016

A comparative method is applied to evaluate well-known formulas for estimating the size of supercavities of axisymmetric cavitators for the supercavitating underwater vehicle. Basic functional forms of these formulas are derived first for the cavity diameter from a momentum integral estimate and second for the cavity length from an asymptotic analysis of inviscid supercavity flows. The length and the diameter of axisymmetric supercavities estimated by each formula are compared, with available experimental data for a disk and a 45° conical cavitators, and also with computational results obtained by a CFD code, ‘fluent’, for conical cavitators of wide range of cone angles. Results for estimating the length and the diameter of the supercavities show in general a good agreement, which confirms the size of the supercavities for disk and conical cavitators can be estimated accurately by these simple formulas of an elementary function of cavitation number and drag coefficient of the cavitator. These formulas will be useful for from conceptual design of the cavitator to real-time control of the supercavitating underwater vehicle.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1951-1956
• /
• 2008

Various MEMS accelerometers are used in engineering applications including automobiles, mobile phones, military systems, and electronic devices. Among them, the thermal accelerometer employing the temperature difference induced by the convective flow inside the micro cavity has been a topic of interest. As the convective sensor does not utilize a solid proof mass, it is compact, lightweight, inexpensive to manufacture, sensitive and highly endurable to mechanical shock. However, the complexity of the convective flow and various design constraints make optimization of a device a crucial step before fabrication. In this work, optimization of a 2-axis thermal convective MEMS accelerometer is conducted based on 3-dimensional numerical simulation. Parametric studies are performed by varying the several design variables such as the heater shape/size, the cavity size and types of the gas medium and the position of temperature probes in the sensor. The results of optimal design are presented.

• Journal of Chest Surgery
• /
• v.11 no.4
• /
• pp.456-460
• /
• 1978

Desmoid tumor is found most often in the anterior abdominal wall of parous women. Although it may originate in virtually any musculotendinous structure, those of the chest wall are rare. We experienced a case of large dumb bell shaped desmoid tumor originated in intercostal muscle and invaded anterior chest wall, pericardium, pleura and the lung. The patient was healthy in appearance except a painful swelling on the anterior chest wall. Roentgenographic studies demonstrated a huge homogenous mass in the right anterior chest cavity. He was treated with resection of the tumor including .anterior chest wall, a portion of the pericardium, middle lobe, and part of upper & lower lobes of the right lung because of tumor invasion. The tumor composed with two parts, one [$5{\times}4{\times}3$cm in size] is over the rib cage and another [$10{\times}15{\times}10$cm in size] is in the right chest cavity. Postoperative course was uneventful and there was no evidence of recurrence until last visit, 5 months after surgery.

• Design & Manufacturing
• /
• v.12 no.3
• /
• pp.55-59
• /
• 2018

In a multi-cavity mold having a runner layout of a fish bone structure, problems of unbalanced filling between cavities occur constantly. Unbalanced charging lowers the dimensional accuracy of a molded article and causes deformation after molding. To solve this problem, the gate size connected to each cavity is adjusted using the BGV (Balanced Gate Value) equation. In this paper, in order to solve the filling imbalance problem of the runner layout mold of fish bone structure through injection molding analysis study, we compared the charging imbalance phenomenon before and after improvement after adjusting the gate size by applying BGV equation. From the results of the molding analysis, the shrinkage ratio before and after the improvement of the molded article was improved by only about 0.08%. Based on these results, it was confirmed that the charging imbalance problem was not significantly improved even when the BGV equation was applied.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.11
• /
• pp.966-977
• /
• 2015

This paper presents a novel modified coaxial cavity resonator and its application to bandpass filters with compact size and improved quality factor(Q-factor). The proposed resonator is made up of ${\Gamma}-shape$ or curved four inner conductive posts within a single cavity, which provides quadruplet to realize bandpass filter. No metallic walls inside the cavity are required, and thus the utilization efficiency of the cavity space is improved. As a result, the unloaded Q can be approximately 15 % higher in comparison to the conventional coaxial resonator, or more than 35 % volume saving can be achieved while maintaining the similar Q-factor value with the conventional designs. In addition, due to the multiple cross-coupling occurring within the cavity, including the source-to-load coupling, four flexible transmission zeros can be created to realize different filtering functions. Simulations as well as experimental results of four- and eight-pole filters are presented to validate this attractive design concept. Good agreement between measured and computed results is obtained.

• Tunnel and Underground Space
• /
• v.26 no.6
• /
• pp.493-507
• /
• 2016

Scaled model tests were performed to investigate the stability of a foundation located above limestone cavities. Cavity shape was assumed to be an ellipse having 1/3 for the ratio of minor to major axis lengths. 12 different test models which have various depths, locations, inclinations, sizes and numbers of cavity were experimented and they were classified into 5 different groups. Crack initiation pressure, maximum pressure, deformation behaviors, failure modes and subsidence profiles of test models were obtained, and then the influences of those parameters on the foundation stability were investigated. No cavity model showed a general shear failure, whereas the models including various cavities showed the complicated three different failure modes which were only punching failure, both punching and shear failures, and double shear failure. The stability of foundation was found to be decreased as the cavity was located at shallower depth, the size and number of cavity were increased. Differential settlements appeared when the cavity was located under the biased part of foundation. Furthermore, subsidence profiles were found to depend on the distribution of underground cavities.

• Development and Reproduction
• /
• v.15 no.4
• /
• pp.291-299
• /
• 2011

The membranous adhesions could induce implantation failure despite transplantation of high quality of embryo. Clinically, of the patients who have membranous filmy adhesions, endometrial polyps have been found in not infrequently. Thus this study was tried to evaluate the features of endometrial polyps and the effect of endometrial polyps on formation and extents of membranous adhesions in uterine cavity of infertile patients under hysteroscopy. A retrospective study was conducted on 34 infertile patients who were diagnosed as endometrial polyps with membranous adhesions during hysteroscopy from July 2008 to July 2011. Number, size, location and morophologic type of endometrial polyps were investigated. If needed, methylene blue solution was instillated to endometrial cavity to identify membranous adhesions. Then, associations between membranous adhesions with features of endometrial polyps were evaluated. Mean size of endometrial polyp was $1.6{\pm}0.6$ cm, the bigger of endometrial polyps was, the larger of extents of membranous adhesions. (p<0.05). Endometrial polyps were locate evenly in endometrial cavity as follows: anterior uterine wall, 39.1%; posterior uterine wall, 34.8%; lateral uterine wall, 26.1%; upper: 29.4%, middle: 32.4%, lower segment, 35.3%. Mean number of endometrial polyps was $2.26{\pm}1.3$. The pedunculated type was 37.7% and sessile type was 32.4%. There was no statistically significant association of location, number and morphologic type of endometrial polyps with membranous adhesions. In conclusion, hysteroscopy before in vitro fertilization on infertile patients was worthy because of removing of endometrial polyps and membranous adhesions.