• Journal of Radiation Protection and Research
• /
• 제1권1호
• /
• pp.10-14
• /
• 1976

공동(空洞)크기가 LiF 열형광선량계(熱螢光線量計)의 감응(感應)에 미치는 영향(影響)을 포리에틸렌 매질내(媒質內)에 삽입(揷入)한 구형(球型) 열형광선량계공동(熱螢光線量計空洞)의 가상계(假想系)에서 이론적(理論的)로 연구(硏究)하였다. 크기가 다른 반경(半徑)을 가진 구형공동(球型空洞)의 감응(感應)은 최근(最近)의 공동이론(空洞理論)을 適用(적용)하여 입사광자(入射光子) 에너지의 함수(函數)로서 계산(計算)하였다. 그반경(半徑)은 1.578mm에서 6.528mm까지 취하였고 입사광자(入射光子)에너지는 0.02MeV에서 0.3Mev까지의 범위를 택하였다. 결과(結果)로서 매질내(媒質內)에 삽입(揷入)한 공동(空洞)으로서의 LiF 열형광선량계(熱螢光線量計)의 감응(感應)은 입사광자(入射光子)의 에너지는 물론 선량계(線量計) 자체(自體)크기의 함수(函數)라는 것을 발견(發見)하였다.

• 소성∙가공
• /
• 제17권7호
• /
• pp.528-533
• /
• 2008

Cavity in the mold is exposed to high pressure during injection molding operation. Injection molded articles with deep depth are often demanded as design variety increases. Subsequently mold becomes weak and deformation increases as the mold depth increases. Thus the injection molds for deep depth articles should be designed to hold out high pressure or stress concentration and large deformation. Through this study, equation for mold design was examined and suggested novel method to determine equation for mold design with deep depth. Novel equation developed in this study was modified from beam theory considering cantilever and two points bending situation while previous equation was modified from just cantilever bending situation. The validity of novel equation was verified through computer simulations for various mold side and wall thickness.

• Design & Manufacturing
• /
• 제11권1호
• /
• pp.14-18
• /
• 2017

Recently, the injection-molded products are lighter, and thinner than ever. In this work, Injection molding simulation was conducted to analysis the filling pattern imbalance in high speed injection molding process for thin-wall injection component, 8 inches LGP. Numerical analysis shows that shear heated polymer near the side wall causes filling imbalance between center and side of cavity. Short shot experiments were conducted and compared with simulation results. Filling imbalance ratio showed a tendency to increase for wider fan gate.

• Journal of Chest Surgery
• /
• 제46권4호
• /
• pp.312-315
• /
• 2013

In chest wall reconstruction after wide chest wall resection, the use of a musculocutaneous flap or prosthetic materials is inevitable for maintaining thoracic movement and a closed pleural cavity. We report a case of a 63-year-old male with a large invasive thymic carcinoma in the anterior mediastinum. The mass measured 6.8 cm and involved the sternum, left side of the parasternal area, ribs, and intercostal muscles. The patient underwent subtotal sternectomy, radical thymectomy, and reconstruction with biological mesh (Permacol). Successful chest wall reconstruction without any other complications was achieved, demonstrating the effectiveness of Permacol.

• 한국수의병리학회지
• /
• 제5권2호
• /
• pp.67-70
• /
• 2001

Spontaneous subcutaneous cysts were detected from three dogs, being a 4-year-old male shih tzu, an 11-month-old female britany spaniel and a 9-month-old male mongrel. All the cysts were occurred around the joints (one elbow's and two shoulderes', respectively). After surgical removal, the lesions did not recur for 6 months follow-up. Neither cyst communicated with the joint cavity. Grossly, the subcutaneous ovoid cysts had moderate to abundant mucinous fluid. Histologically, the cyst wall consisted of inner myxomatous and outer immature connective tissue. Some parts of the cyst wall had various stages of myxoid metaplasia of collagen tissue leading to new cyst formation. The true lining cells of the inner cyst wall were not observed in all the cysts. From these results, these cases were diagnosed as subcutaneous ganglion cysts. This is the first report of canine subcutaneous ganglion cysts in Korea.

• Applied Microscopy
• /
• 제28권2호
• /
• pp.159-170
• /
• 1998

The glandular secretory system of the capitate gandular trichomes in leaf of Thymus quinquecostatus Celakovsky was examined by transmission electron microscope. The glandular trichome was consisted of three cell layers; an basal cell layer, a stalk cell with single-celled intermediate layer and a discoid secretory layer with thickened cuticle. The secretory cell was dense, rich in mitochondria, rER, plastds, Golgi complex and had many vesicular structure. Typical plastids with reticulate body and plastoglobule were present in glandular trichome. The tytoplasm of secretory cell was filled with osmiophilic secretory materials. The secretory vesicles, originated from Golgi complex, appeared as membrane bounded vesicles and secreted to the outer wall surface. The presences of well developed rER, mitochondria, Golgi complex, and membrane-bounded vesicles fused with plasmalemma in the secreting cells indicate that the granulocrine mechanism of secretion was occurring in T. quinquecostatus. Subcuticular cavity was developed between the cuticular layer and the secretory cell wall, and it formed above the secretory cell upon separation of cuticle-wall.

• 대한기계학회논문집B
• /
• 제21권2호
• /
• pp.316-328
• /
• 1997

There were appreciable progresses on the study of shock wave / boundary layer interaction control in the transonic flow without nonequilibrium condensation. But in general, the actual flows associated with those of the airfoil of high speed flight body, the cascade of steam turbine and so on accompany the nonequilibrium condensation, and under a certain circumstance condensation shock wave occurs. Condensation shock wave / boundary layer interaction control is quite different from that of case without condensation, because the droplets generated by the result of nonequilibrium condensation may clog the holes of the porous wall for passive control and the flow interaction mechanism between the droplets and the porous system is concerned in the flow with nonequilibrium condensation. In these connections, it is necessary to study the condensation shock wave / boundary layer interaction control by passive cavity in the flow accompanying nonequilibrium condensation with condensation shock wave. In the present study, experiments were made on a roof mounted half circular arc in an indraft type supersonic wind tunnel to evaluate the effects of the porosity, the porous wall area and the depth of cavity on the pressure distribution around condensation shock wave. It was found that the porosity of 12% which was larger than the case of without nonequilibrium condensation produced the largest reduction of pressure fluctuations in the vicinity of condensation shock wave. The results also showed that wider porous area, deeper cavity for the same porosity of 12% are more favourable "passive" effect than the cases of its opposite. opposite.

• Journal of Mechanical Science and Technology
• /
• 제18권10호
• /
• pp.1782-1798
• /
• 2004

A numerical study of a natural convection in a rectangular cavity with the low-Reynolds-number differential stress and flux model is presented. The primary emphasis of the study is placed on the investigation of the accuracy and numerical stability of the low-Reynolds-number differential stress and flux model for a natural convection problem. The turbulence model considered in the study is that developed by Peeters and Henkes (1992) and further refined by Dol and Hanjalic (2001), and this model is applied to the prediction of a natural convection in a rectangular cavity together with the two-layer model, the shear stress transport model and the time-scale bound ν$^2$- f model, all with an algebraic heat flux model. The computed results are compared with the experimental data commonly used for the validation of the turbulence models. It is shown that the low-Reynolds-number differential stress and flux model predicts well the mean velocity and temperature, the vertical velocity fluctuation, the Reynolds shear stress, the horizontal turbulent heat flux, the local Nusselt number and the wall shear stress, but slightly under-predicts the vertical turbulent heat flux. The performance of the ν$^2$- f model is comparable to that of the low-Reynolds-number differential stress and flux model except for the over-prediction of the horizontal turbulent heat flux. The two-layer model predicts poorly the mean vertical velocity component and under-predicts the wall shear stress and the local Nusselt number. The shear stress transport model predicts well the mean velocity, but the general performance of the shear stress transport model is nearly the same as that of the two-layer model, under-predicting the local Nusselt number and the turbulent quantities.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.321-337
• /
• 2000

Dental caries, one of the most frequent dental disease, become larger because it can be thought as a simple disease. Further more, it can progress to unexpected root canal therapy with fabrication of crown that needs reduction of tooth structure. Base is required in a large caries and ZOE, ZPC, glass ionomer are used frequently as base material. They, with restorative material, can affect the longevity of the restoration. In this study, we assume that the mandibular 1st molar has deep class I cavity. So, installing the 3 base material, 3 kinds of fillings were restored over the base as follows; 1) amalgam only, 2) amalgam with ZPC, 3) amalgam with ZOE, 4) amalgam with GI cement, 5) gold inlay with ZPC, 6) gold inlay with GI cement, 7) composite resin only, 8) composite resin with GI cement. After develop the 3-dimensional model for finite element analysis, we observe the distribution of stress and temperature with force of 500N to apical direction at 3 point on occlusal surface and temperature of 55 degree, 15 degree on entire surface. The analyzed results were as follow : 1. Principal stress produced at the interface of base, dentin, cavity wall was smallest in case of using GI cement as base material under the amalgam. 2. Principal stress produced at the interface of base, dentin, cavity wall was smaller in case of using GI cement as a base material than ZPC under gold inlay. 3. Composite resin-filled tooth showed stress distributed over entire tooth structure. In other words, there was little concentration of stress. 4. ZOE was the most effective base material against hot stimuli under the amalgam and GI cement was the next. In case of gold inlay, GI cement was more effective than ZPC. 5. Composite resin has the small coefficient of thermal conductivity. So, composite resin filling is the most effective insulating material.

• 대한기계학회논문집B
• /
• 제34권10호
• /
• pp.925-931
• /
• 2010

본 논문은 공동 주위 난류유동특성을 LES 기법으로 수치해석을 수행하여 알아보았다. 본 연구에 적용된 레이놀즈수는 공동 깊이만큼의 높이 h 에서의 유속을 기준으로 $1.0{\times}10^5$ 이며 3 차원 공동에서의 유동특성을 알아보았다. 적절한 비압축성 Filtered Navier-Stokes 방정식을 적용하기 위해, 계산격자를 공동 표면 근처에는 조밀하게 멀어질수록 성기게 생성하였으며, 이는 계산시간을 단축시키며 빠른 수렴을 도와준다. 또한, Boussinesq 가설을 subgrid-scale 난류모델에 적용하였고, Subgrid-scale 난류점성을 얻기 위해 smagorinsky-Lilly SGS 모델을 적용하였으며, 그 때의 CFL 수는 1.0 이다. 또한, 본 논문은 서로 다른 4 가지 형상의 공동의 및 입구조건의 변화에 따른 유동 특성도 함께 연구되었다.