• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.211-221
• /
• 2006

Purpose The aims of this study were to evaluate micro-tensile bond strength of composite resin bonded to dentin following high-speed rotary handpiece preparation or Er:YAG laser preparation with two different adhesive systems and to assess the influence of different Er:YAG laser energies on the micro-tensile bond strength. Materials and Methods In this study, 40 third morlars were used. Flat dentin specimans were obtained and randomly assigned to eight groups. Dentin surfaces were prepared with one of four cutting types: carbide bur, Er:YAG laser (2 W, 3 W and 4 W) and conditioned with two bonding systems, Scotchbond Multipurpose Plus (SM), Clearfil SE bond (SE) and composite resin-build ups were created. After storage for 24 hours, each specimen was serially sectioned perpendicular to the bonded surface to produce more than thirty slabs in each group. Micro-tensile bond strength test was performed at a crosshead speed of 1.0 mm/min. Micro-tensile bond strengths (${\mu}TBS$) were expressed as means$\pm$SD. Data were submitted to statistical analysis using two-way ANOVA, one-way ANOVA, Student-Newman-Keuls' multiple comparison test and t-test. Results and Conclusion 1. Regardless of bonding systems, the ${\mu}TBS$ according to cutting types were from highest to lowest : 3 W, 2 W, Bur, and 4 W. In addition, there was no significant difference between Bur and 4 W (p<0.001). 2. Regardless of cutting types, SM showed significantly higher ${\mu}TBS$ than SE (p<0.001). 3. Bonding to dentin conditioned with SM resulted in higher ${\mu}TBS$ for 3 W compared to Bur, 2 W, and 4 W. There was no significant difference between 2 W and Bur (p<0.001). 4. Bonding to dentin conditioned with SE resulted in higher ${\mu}TBS$ for 3 W compared to 2 W, 4 W, and Bur. Bur exhibited significant lower ${\mu}TBS$ than all other cutting types. There were no significant differences between 3 W, 2 W and between 4 W and Bur (p<0.001). 5. The ${\mu}TBS$ of laser cutting groups were shown in order from highest to lowest: 3 W, 2 W and 4 W in two bonding systems. There was no significant difference between 2 W and 3 W in SE (p<0.001). : The ${\mu}TBS$ of composite resin bonded dentin was significantly affected by interaction between the cutting type and bonding system. In the range of 2 W-3 W, cavity preparation of the Er:YAG laser seems to supply good adhesion of composite resin restoration no less than bur preparation. In particular, if you want to use the self-etching system, including Clearfil SE bond for the purpose of a simplification of the bonding procedures and prevention of adverse effects by excessive etching, an Er:YAG laser may offer better adhesion than a bur.

• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.223-229
• /
• 2006

The objectives of this study was to investigate the amount of tooth ablation and the change of intrapulpal temperature by Er:YAG laser as it relates to pulse energy and pulse repetition rate at the identical power and, thereby, to reveal which of the two parameters strongly relates with ablation efficiency and intrapulpal temperature. Extracted healthy human molar teeth were sectioned into two pieces and each specimen was irradiated within the combination of pulse energy and pulse repetition time at the same power of 3W; $300mJy{\times}10Hz$ group, $200mJy{\times}15Hz$ group, and $150mJy{\times}20Hz$ group. Each specimen comprised ten tooth specimens. A laser beam with conjunction of a water flow rate of 1.6 ml/min was applied over enamel surfaces of the specimens during 3 seconds and the ablation amount was determined by difference in weight before and after irradiation. To investigate the temperature change in the pulp according to the above groups, another five extracted healthy human molar teeth were prepared. Each tooth was embedded into resin block and the temperature-measuring probes were kept on the irradiated and the opposite walls in the dental pulp during lasing. When the power was kept constant at 3W, ablation amount increased with pulse energy rather than pulse repetition rate (p=0.000). Although intrapulpal temperature increased with pulse repetition rate, there were no significant differences among the groups and between the irradiated and the opposite pulpal walls, except at a condition of $150y{\times}20Hz$ (p=0.033). Conclusively, it is suggested that ablation efficacy is influenced by pulse energy rather than pulse repetition rate.

• Journal of Oral Medicine and Pain
• /
• v.30 no.1
• /
• pp.131-140
• /
• 2005

The purpose of this study was to examine the ablation rate of Er: YAG laser irradiation on dentin and enamel and to observe the microscopic structures of cavities formed after ablation of enamel and dentin in using a bur and cavities formed after ablation using laser. Er:YAG laser irradiated at 200 mJ, 250mJ, 300mJ at the frequency of 20Hz, 15Hz. The following results were obtained : 1. The ablation rate of dentin groups at power of 3 W-6 W was about $1.103{\sim}2.639mm^3/sec$ and there were no significant differences between power of 4.5 W$\sim$6 W. 2. The ablation rate of enamel groups at power of 3 W-6 W was about $0.413{\sim}0.969mm^3/sec$ and there were no significant differences between power of 4 W$\sim$6 W. 3. With SEM examination of the cavity surface treated with the conventional high speed bur revealed relatively flat appearance almost covered with a debris like smear layer. 4. With SEM examination of the lased surface of dentin groups revealed no smear layer and no debris and openings of dentinal tubules were clearly opened. But the lased surfaces of the groups over 3 W were irregular and particles were loosely attached on it. 5. With SEM examination of the lased surface of enamel groups revealed severely destructed surface at the 6 W group and melting drop materials at the 3 W group. But the lased surface of 4 W group revealed clearly ablated surface. Therefore when cutting teeth using Er:YAG laser, the lasing power which can make effective ablation rate and minimize the thermal effect could be 3W at dentin and 4W at enamel. But, further studies and additional data collection will be necessary for appropriate lasing condition of Er:YAG laser.

• Korean Journal of Ichthyology
• /
• v.6 no.2
• /
• pp.237-243
• /
• 1994

This work was conducted to study sex differentiation in the black sea bream, Acanthopagrus schlegeli (Bleeker), using a histological method for the appearance of primordial germ cell, formation of primitive gonads, differentiation of female and male from newly hatched larva to the ovotestis stage of fish. The 3~4 primordial germ cells of $6.8{\sim}7.2\;{\mu}m$ in size, which were buried under fibrous mesenchymal tissue between gut duct and notochord of pre-larva with a total length (T.L.) of 2.4 mm at 3 days after hatching. The proto-gonial cells were located in the epithelium of the coelom attached with pigment cells of juvenile with 6.4 mm in T.L. at 21 days after hatching. In juvenile of 20.8 mm in T.L. at 59 days after hatching, the proto-gonial cells were migrated to the retro-peritoneum through the lineshaped primitive gonad composed of fibrous mesenchymal tissue. In juvenile of 7.8 em in T.L. at 186 days after hatching, the mitotic division of proto-gonial cell appeared in the lineshaped primitive gonad having many eosinophilic granule cells and abundant fibrous connective tissue. In juvenile of 9.5 em in T.L. at 254 days after hatching, the gonad was occupied by abundant fibrous connective tissue, bundles of spermatocyte and spermatid. In juvenile of 10.5 cm in T.L. at 13 months after hatching, the gonad was divided into cortical layer and medullary layer. The former was composed of bundles of a few spermatocytes and proto-gonial cells, the latter was filled with the fibrous mesenchymal tissue and a few proto-gonial cells. In juvenile of 14.7 em in T.L. at 16 months after hatching, the gonad was separated into ovarian part and testicular part by the fibrous connective tissue. The ovarian part is consisted of ovarian cavity and oocytes of perinucleolus stage. The testicular part was occupied by spermatogonia in the cyst.

• Tuberculosis and Respiratory Diseases
• /
• v.40 no.2
• /
• pp.104-111
• /
• 1993

Background: Gram-negative bacterial endotoxin induced septicemia is known to be a leading cause in the development of adult respiratory distress syndrome(ARDS). The mechanism of endotoxin induced lung injury is mainly due to the activated neutrophils which injure the capillary endothelial cells by releasing oxidant radical and resulted in pulmonary edema. We studied the change of antioxidant enzyme in the case of large or small, intermittant dose of endotoxin infused rat lungs. Methods: Endotoxin was given to the rat through the peritoneal cavity in the dose of 7 mg/kg body weight in the large dose group and 1 mg/kg for 10 days in the small dose group. Bronchoalveolar lavage (BAL) was done and rats were killed at 6, 12, 24 hours after single endotoxin injection in the large dose group and 3, 7, 10 days after daily endotoxin injection for 10 days in the small dose group. The lungs were perfused with normal saline through the pulmonary artery to remove the blood and were homogenized in 5 volume of 50 mM potassium phosphate buffer containing 0.1 mM EDTA. After centrifuging at 100,000 g for 60 minute, the supernatent was removed and stored at $-70^{\circ}C$ until measuring for superoxide dismutase (SOD), catalase, glutathione peroxidase (GSH-Px) and protein. Results: We observed the following results. 1) The lung wet/dry weight ratio and albumin concentration in the BAL fluids were increased to peak at 12 hours and neutrophil number in the BAL fluids were peak at 6 hours after endotoxin injection in the large dose group. 2) Cu, Zn SOD (IU/mg protein) was significantly decreased after 6, 12 hours after endotoxin injection in the large dose group. 3) There were no singnificant change in the level of Mn SOD, catalase, GSH-Px after endotoxin injection in both groups. Conclusion: Endotoxin in the large dose group produced the acute pulmonary edema and decreased the Cu, Zn SOD in the lung tissue after injecting endotoxin at 6 and 12 hours. These phenomenon may be due to the cell membrane damage by endotoxin. Further research would be necessary whther giving SOD by intratracheal route or method to increase the synthesis of SOD may lessen the acute lung injury by endotoxin.

• Tuberculosis and Respiratory Diseases
• /
• v.40 no.2
• /
• pp.158-164
• /
• 1993

Background: Recently, lung abscess tends to be increased in patients with underlying disease, most of whom are unsuitable for surgery when medical treatment fails. The patients with giant lung abscesses do not frequently respond to antibiotics and often have life-threatening complications. Therefore, more intensive cares are required in these patients. We studied the results and effects of percutaneous catheter drainage in these patients. Method: We performed fluoroscopy-guided percutaneous pigtail catheter (8.3 F) drainage by Seldinger technique in 9 cases of lung abscess (in 7 cases, intractable to medical treatment for an average of 8.4 days and in 2 cases, catheter drainage immediately performed due to a large cavity that was initially 10 cm in diameter). We compared 10 cases of lung abscess as control group which had receieved conventional medical treatment alone. Results: Seven of the 9 patients in study group of percutaneous drainage and 7 of the 10 patients in control group of medical treatment alone clinically improved in the average of 1.8 and 8.7 days, respectively. The mean duration of drainage was 13.2 days. There were 3 cases of death from massive hemoptysis, asphyxia of pus, and sepsis in control group, as compared with 2 cases of death from hepatic encephalopathy and sepsis in study group. The malfunctions of catheter occurred in these 2 cases, obstruction and dislodgement. But there were no significant pleuropulmonary complications of percutaneous drainage. Conclusion: Percutaneous drainage is effective and relatively safe in the management of lung abscesses refractory to medical therapy or giant lung abscesses.

• Tuberculosis and Respiratory Diseases
• /
• v.40 no.6
• /
• pp.683-693
• /
• 1993

Background: During movement the major inputs to nervous system come from firstly the muscle and joint to maintain posture and motion and secondly the chemoreceptors and baroreceptors to adjust the cardiovascular and respiratory function. Their complex relationships are generally studied for many years but the direct relation between the joint and respiratory system is not studied thoroughly until now. So this experiment was performed to determine whether the natural movement of knee joint can cause the enhancement of respiratory function by observation of the changes of respiratory rate, phrenic nerve activity and inspiratory neuron activity during the stimulation of knee joint in cat anesthetized with $\alpha$-chloralose. Method: Twenty six male adult cats were used and the extracelluar recording using bipolar platinum electrode and carbon filament electrode was done to record the changes in the activities of phrenic nerve and inspiratory neuron movement of knee joint, injection of chemicals into the joint cavity and electrical stimulation of articular nerve were done. Results: The 60 Hz. could not but 120 Hz. flexion-extension movement of knee joint increased respiratory rate(R.R.), tidal neural activity(TNA) and minute neural activity(MNA). Intra-articular injection of lactate could not increase R.R. but significantly increase TNA and MNA which represented the enhanced respiratory function. Injection of potassium chloride showed similar effects with the case of lactate but the duration of effect was shorter. The electrical stimulation of medial articular nerve with IV strength which could activate only group I and II afferents showed increased TNA and MNA during stimulation but 20 V stimulation which could activate all the afferents increased all the respiratory parameters. The changes of inspiratory neuron activity by knee joint stimulation was similar to that of phrenic nerve. Conclusion: The respiratory center could be directly stimulated by the activation of group I and II articular afferents and it seemed that the magnitude of the respiratory center enhancement is proportional to the amount of sensory information from the knee joint. These facts might suggest that the respiratory function could be enhanced even by the normal movement of knee joint.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.3
• /
• pp.621-628
• /
• 1997

Background : As the pleural inflammation progresses, exudative pleural fluid becomes loculated rapidly with pleural thickening. Complete drainage is important to prevent pleural fibrosis, entrapment and depression of lung function. Intrapleural urokinase instillation therapy has been advocated as a method to facilitate drainage of gelatinous pleural fluid and to allow enzymatic debriment of pleural surface. This study was designed to investigate the predictors of effectiveness of intrapleural urokinase in the treatment of loculated pleural effusion. Method : Thirty-five patients received a single radiographically guided pig-tail catheter ranging in size from 10 to 12 French. Twenty-two patients had tuberculous pleural effusions, and 13 had non-tuberculous postpneumonic empyemas. A total of 240,000 units of urokinase was dissolved in 240 ml of normal saline and the aliquots of 80mL was instilled into the pleural cavity via pig-tail catheter per every 8hr. Effectiveness of intrapleural urokinase instillation therapy was assessed by biochemical markers, ultrasonography, and technical details. A greater than 50% improvement on follow-up chest radiographs was defined as success group. Result : Twenty-seven of 35 (77.1%) patients had successful outcome to urokinase instillation therapy. Duration of symptoms before admission was shorter in success group ($11.8{\pm}6.9day$) than in failure group ($26.62{\pm}16.5day$) (P<0.05). Amount of drained fluid during urokinase therapy was larger in success group ($917.1{\pm}392.7ml$) than in failure group ($613.8{\pm}259.7ml$) (P<0.05). Pleural fluid glucose was higher in success group ($89.7{\pm}35.9mg/dl$) than in failure group ($41.2{\pm}47.1mg/dl$) (P<0.05). Pleural fluid LDH was lower in success group ($878.4{\pm}654.3IU/L$) than in failure group ($2711.1{\pm}973.1IU/L$) (P<0.05). Honeycomb septated pattern on chest ultrasonography was observed in six of eight failure group, but none of success group (P<0.05). Conclusion : Longer duration of symptoms before admission, smaller amount of drained fluid during urokinase therapy, lower glucose value, higher LDH value in pleural fluid examination, and honeycomb septation pattern on chest ultrasonograph were predictors for failure group of intrapleural urokinase instillation therapy.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.721-728
• /
• 2004

Velopharyngeal closure is a sphincter mechanism between the activities of the soft palate, lateral pharyngeal wall and the posterior pharyngeal wall, which divides the oral and nasal cavity. It participates in physiological activities such as swallowing, breathing and speech. It is called a velopharyngeal dysfunction when this mechanism malfunctions. The causes of this dysfunction are defects in (1) length, function, posture of the soft palate, (2) depth and width of the nasopharynx and (3) activity of the posterior and lateral pharyngeal wall. The purposes of this study are to analyze the nasopharynx of cleft palate patients using cephalometry and to evaluate the degree of hypernasality using nasometry to find its relationship with velopharyngeal dysfunction. The following results were obtained : 1. In cephalometry, there were significant differences in soft palate length, soft palate thickness, nasopharyngeal depth, nasopharyngeal area, and adequate ratio between two groups. 2. In nasometry, there were significant differences between two groups in vowel /o/ and sentences including oral consonants. 3. In cleft palate patients, though no general correlation was found between Anatomic VPI and nasalance scores, vowel /i/ and sentences including oral consonants were slightly correlated. In conclusion, cephalometry and nasometer results were significantly different between the two groups. Though in the cleft palate group, Anatomic VPI and nasalance scores, which are indices for velopharyngeal closure, excluding the vowel /i/ and sentences including oral consonants show generally no significance.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.44-52
• /
• 2010

The objective of this in vitro study was to detect and monitor demineralization and remineralization of primary teeth according to restorative materials using quantitative light-induced fluorescence (QLF). A single bur hole was drilled on the each sound forty eight primary anterior teeth, and the specimens were divided into three groups. The cavity was restored with $Filtek^{TM}$ Z250(Group 1), F2000(Group 2), $Ketac^{TM}$ N100(Group 3) following the manufacturer's instructions. The teeth were subjected to the demineralizing buffer for 3 days, and then subjected to a remineralizing buffer for 14 days. The change of mineral loss(${\Delta}Q$) according to the stages was evaluated by QLF and the following results were obtained: 1. When demineralization was done, ${\Delta}Q$ was increased as follows. : Group 1 ($-110.79\;{\pm}\;27.77$) < Group 2 ($-104.84\;{\pm}\;28.95$) < Group 3 ($-90.16\;{\pm}\;21.87$) : Resistance to demineralization was statistically significant in Group 3. 2. There was a statistically significant increase in ${\Delta}Q$ of all groups since 1st day of remineralization 3. The rate of remineralization, ${\Delta}$(${\Delta}Q$)/day, showed significant high value in each group on the 1st day then decreased rapidly. 4. There was no statistically significant difference in the degree of remineralization among restorative materials.