• Journal of Auto-vehicle Safety Association
• /
• v.12 no.2
• /
• pp.47-55
• /
• 2020

In this case study, the brake line failure of air over hydraulic(AOH) brake system is described. AOH brake system is applied to commercial vehicles between 5 to 8 tons. It consists of a hydraulic system using compressed air and operates the air master to form hydraulic pressure to transfer braking power to the wheels. When the brake lines of the system applied to vehicles with high load capacity are damaged, the braking force of one shaft is lost, and the braking distance increases rapidly, leading to a big accident. Failure of the brake line occurs due to various causes such as road surface fragmentation, corrosion of the line, and aged deterioration of air brake hose. The braking force could be decreased even when a very small break in the form of a pin-hole occurs. However, it is difficult to find a part where the thickness of the line is thin due to stone pecking or corrosion generated in the pin-hole formed on the brake line located under the lower part of the vehicle by the sensory evaluation or the conventional braking force test. Accordingly, it is necessary to analyze the condition and cause of the failure of the brake line more precisely when the accident investigation of the heavy vehicles, and also to examine the necessity of the advanced test for the aged brake line.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.5
• /
• pp.960-967
• /
• 2009

Power supply system of electric railway has a diversity of safety problems since it should supply high electric power to the trains moving high speed with a lot of passengers on board. This paper provides a risk assessment approach to safety management of the electric railway facilities. Construction of database from field accident information, risk assessment and management of the risk are carried out systematically to ensure the safety. The risk assessment includes hazard identification, cause analysis by FTA(Fault Tree Analysis), consequence analysis by EVA(Event Tree Analysis), and loss analysis. In terms of the severity and the probability of the accidents deduced by these analyses, the risk of the accidents is assessed by using a risk matrix designed for electric railway facilities. Based on the risk assessment, possible risk mitigation options are identified and evaluated by analyzing their impact on the risk reduction and their cost benefit ratio. The long-term safety of the electric railway facilities can be ensured by renewal of the risk assessment and the risk mitigation option analysis with continuous accident database update. The proposed approach is applied to the electric railway facilities of Korean railway based on the accident data from 2002 to 2008.

• International Journal of Ocean System Engineering
• /
• v.1 no.4
• /
• pp.211-221
• /
• 2011

Tugboats are widely used near harbors to assist with various operations such as the berthing and deberthing of very large vessels and the towing of barges. Capsizing accidents involving tugboats occasionally take place when the tugboat makes rapid turns in harsh weather conditions. When there is little evidence suggesting how the accident occurred and when the crew members are missing, it is necessary to predict the time history of the towing vessel’s attitude and trajectory from its departure point to when and where it capsized, depending on various input parameters using a numerical simulation. In this paper, the dynamics of a tugboat and a towed barge in conjunction with the external force and moment were established, and the possible input parameters and operational scenarios which might influence the large roll motion of the tugboat were identified. As a result of analyzing the simulated time history of the excessive roll motion of the tugboat, it was found that roll motion can take place when the tugboat is situated on the crest of a wave and when it is pulled by a towed barge through a towing line. The main cause of the accident would be the parameters that primarily influence such situations. These are the wave parameters, course changing scenario, and the amount of tension.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.12
• /
• pp.90-94
• /
• 2014

Recently, various types of trains are being operated in the same railroad whose designated stop stations are not the same. In other words, each train does not stop at every station. This could cause the pass-through accidents in which a train passes a station where it is supposed to stop. Although the number of train accidents is on the decrease, this type of error is still an important problem to be resolved. It is true that the burdens of train drivers are growing because the number of high speed trains and non-stop stations is increasing in the current railway system. However, another major reason for this accident is that there is no prevention system for these errors in the current train control system although it is being constantly improved. The purpose of this study is to reinforce the train stop system with wireless communication equipment in order to decrease this type of accident and to maximize the safety of railway transportation.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.5
• /
• pp.48-54
• /
• 2011

Structural modifications of a ship may cause a fatal accident such as sinking and wrecking of ship. Especially, barge ship can be easily reconstructed to load more bulk cargo. In this study, for a real accident case, change of mooring force due to structural modification was analyzed to evaluate accident risk. A two dimensional dynamic model for the barge ship was constructed to compute mooring forces with related to floating motion. The equation of motion was established in Matlab code and buoyancy was calculated by using direct integration of submerged volume. The results showed that wind force, current force, and mooring force after rebuilding was approximately 4.3 kN, 14 kN, 1,561 kN respectively. The maximum force of mooring force according to the length of mooring cable were 1,614 kN at 30 m of mooring cable. Thus, an arbitrary modification of ship lead instability and unreliable result so that illegal rebuilding of ship should be avoided.

• Journal of the Korean Society of Safety
• /
• v.31 no.1
• /
• pp.111-117
• /
• 2016

Natural disasters can cause major accidents in chemical facilities where they can lead to the release of hazardous materials which in turn can result in fires, explosions or toxic dispersion. Technological disasters triggered by natural disasters are referred to as NaTech(Natural Disaster Triggered Technological Disaster). These trends increase the probability of catastrophic future disasters and the potential for mass human exposure to hazardous materials released during disasters. In the present study, we proposed some methods for effective disaster management by conducting case study of major NaTech. First, establishing information sharing system of chemical accident for stakeholders and improving disaster manuals and standards of central and local government and co-operation support system. Second, activating information service of emergency planning and community right to know. Third, improving the integrated chemical accident database including NaTech accidents.

• Research in Community and Public Health Nursing
• /
• v.18 no.4
• /
• pp.643-650
• /
• 2007

Purpose: This study was to obtain information regarding to agricultural accidents in farm workers in the Kyungpook area. Methods: A questionnaire survey was carried out for 528 workers from the 1st to 31st of March, 2007. Frequency, percentage, mean and chi-square test with the SPSS program were used to analyze the data. Results: The causes of agricultural accidents include falling(29.0%), overseeing(18.9%), traffic accident(17.4%), putting between machinery(11.7%), crashing(5.3%), fire (0.6%) in the order of frequency. Injuries from agricultural accidents include fracture(44.7%) cerebral bleeding (10.4%), amputation(7.0%), airway obstruction (2.3%) burn(1.9%), drug addiction(1.9%) in the order of frequency. The largest proportion of the subjects of hospital treatment were in their 50s and belonged to the group of high-level economic state. Agricultural machinery collision was the most frequent cause among the subjects of hospital treatment. Conclusion: These results suggest that carelessness can be a potential risk factor for agricultural accidents in farm workers. These findings may give useful information for developing agricultural accident prevention programs for farm workers.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4607-4616
• /
• 2023

We implement machine learning regression models to predict peak pressures of primary and secondary systems, a major safety concern in Loss Of Condenser Vacuum (LOCV) accident. We selected the Multi-dimensional Analysis of Reactor Safety-KINS standard (MARS-KS) code to analyze the LOCV accident, and the reference plant is the Korean Optimized Power Reactor 1000MWe (OPR1000). eXtreme Gradient Boosting (XGBoost) is selected as a machine learning tool. The MARS-KS code is used to generate LOCV accident data and the data is applied to train the machine learning model. Hyperparameter optimization is performed using a simulated annealing. The randomly generated combination of initial conditions within the operating range is put into the input of the XGBoost model to predict the peak pressure. These initial conditions that cause peak pressure with MARS-KS generate the results. After such a process, the error between the predicted value and the code output is calculated. Uncertainty about the machine learning model is also calculated to verify the model accuracy. The machine learning model presented in this paper successfully identifies a combination of initial conditions that produce a more conservative peak pressure than the values calculated with existing methodologies.

• Journal of the Korean Institute of Gas
• /
• v.10 no.4 s.33
• /
• pp.47-51
• /
• 2006

Safety issues for LNG(Liquified Natural Gas) terminal or LNG tank involve various concerns such as production/transportation at cryogenic temperature of $-160^{\circ}C$, large volume of handling, flammability and explosion risk. Hence, in designing an LNG terminal rigid safety criteria and mandatory requirements are unavoidable. Since known cases of LNG related accident are very few, careful study and root cause analysis of them are very important and provide precious information to increase safety level of the LNG terminal. In this paper most key accident cases were gathered and analysed to understand fundamental safety issues of LNG terminal to prevent further accident.

• Journal of the Society of Disaster Information
• /
• v.10 no.3
• /
• pp.452-457
• /
• 2014

The event of a Chemical disaster response personnel are causative events quickly Appearance & residual contaminant concentrations, should be identified accurately. In addition, the chemical disaster response procedure appropriate progress in the field of Chemical Composition and contaminant concentrations in order confirmation is essential. Use in the field to using the characteristics of each equipment. on-Site response equipment can not verify all the chemicals, materials detection, limited by each equipment. Detection range of equipment & specific materials should be considered complementary. In this study, using the equipment on-site detection of detection kit and detector tube, electronic detection equipment utilized for the rapid response procedure for helping a person to cope.