• 제목/요약/키워드: Catalytic Surface Reaction

검색결과 378건 처리시간 0.03초

SnO2/SiO2 Nanocomposite Catalyzed One-Pot Synthesis of 2-Arylbenzothiazole Derivatives

  • Yelwande, Ajeet A.;Navgire, Madhukar E.;Tayde, Deepak T.;Arbad, Balasaheb R.;Lande, Machhindra K.
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권6호
    • /
    • pp.1856-1860
    • /
    • 2012
  • $SnO_2/SiO_2$ nanocomposite has been synthesized by using sol-gel method. Prepared catalytic materials has been well characterized by using X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FT-IR), Brunauer-Emmer-Teller (BET) surface area, and temperature-programmed desorption of ammonia ($NH_3$-TPD). $SnO_2/SiO_2$ nanocomposite catalyzed synthesis of 2-arylbenzothiazoles by the cyclocondensation of 2-aminothiophenol and aromatic aldehydes under reflux condition in 1:1 EtOH:$H_2O$. After completion of the reaction, catalyst can be recovered efficiently and reused with consistent activity.

Development Study of Mono-Propellant Micro Propulsion Using MEMS Technology

  • Dan, Yoichiro;Kishida, Masahiro;Ikuta, Tatsuya;Takahashi, Koji
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2004년도 제22회 춘계학술대회논문집
    • /
    • pp.597-600
    • /
    • 2004
  • Fabrication technique and performance test of catalytic micro propulsion are treated based on MEMS technology. This propulsion is designed to use hydrogen peroxide as liquid mono-propellant for attitude control of pica-satellite. The propellant is fed into the micro reactor channel and decomposed into hot gas yielding controllable thrust by catalyst. In order to increase the efficiency of the reaction that depends on the contact area of propellant and catalyst, porous surface formation on the channel accompanied by platinum particle deposition has been performed using H$_2$PtCl$_{6}$ solution as a precursor. Several thrusters were fabricated in different concentration of H$_2$PtCl$_{6}$ solution to determine the best quantity of Pt particles. For the comparison of the performance of each thruster, the volume of oxygen generated by the decomposition of hydrogen peroxide and the thrust were measured.red.

  • PDF

금속수소화물과 제올라이트의 혼성화물제조 및 수소화반응 (Preparation of Hybrid Materials with Zeolite and Metal Hydride, and Their Hydrogen Absorbing Properties)

  • 은원표;이공희;배장순;박찬교
    • 한국수소및신에너지학회논문집
    • /
    • 제14권2호
    • /
    • pp.146-154
    • /
    • 2003
  • The hybrids of zeolite and metal hydride were prepared to improve the absorption properties as media for hydrogen storage. The zeolites which was deposited on the surface by metal hydride vapor showed excellent absorption properties and sodalite was proved to be better than zeolite-A in the reaction velocity and hydrogen storage capacity. This suggests the metal hydride could be used effectively as catalytic active material for enhancing the hydrogen storage in zeolite containing $\alpha$-cages and furthermore the hydrogen molecules have preference tobe occluded in their cavities containing $\alpha$-cages more effectively than that containing a and $\beta$-cages.

VOCs 연소용 Mn-PC 촉매 특성 (Catalytic Characteristics of Mn-PC for VOCs Combustion)

  • 서성규;마충곤;류의;윤형선;김상채
    • 대한환경공학회지
    • /
    • 제33권4호
    • /
    • pp.237-242
    • /
    • 2011
  • 본 연구에서는 Mn-PC 촉매와 상압유통식 반응장치를 이용하여 $200{\sim}380^{\circ}C$ 범위에서 VOCs(아세트알데히드, 프로피온알데히드, 톨루엔) 연소반응을 수행하였다. 촉매 전처리(air, $450^{\circ}C$, 1 hr, 60 cc/min) 전 후의 물리화학적 특성변화 조사는 TGA (Thermogravimetric Analyzer), BET (Brunauer Emmett Teller), EA (Elemental Analyzer), XRD (X-ray Diffractometer) 및 SEM (Scanning Electronic Microscope)을 이용하여 파악하였다. TGA 분석결과 Mn-PC의 열중량(공기 분위기) 감소는 $419^{\circ}C$에서 88 wt.%를 나타내었으며, 전처리 후 비표면적은 크게 증가하는 것으로 확인되었다. EA 분석결과 전처리를 통해서 유기물 성분은 분해 또는 연소되어 거의 관찰되지 않는 것으로 파악되었다. 또한 XRD분석을 통해 Mn-PC 촉매가 전처리 후 새로운 형태의 산화물인 $Mn_3O_4$로 전이됨을 확인하였다. 그리고 SEM 분석결과 전처리 과정에서 많은 micropore가 생성된 것으로 관찰되었다. 프로피온알데히드 연소의 경우 전처리한 Mn-PC는 $Mn_3O_4$와 fresh한 Mn-PC 보다 우수한 촉매활성을 나타내었다. 전처리된 Mn-PC상에서 VOCs 연소 효과는 톨루엔 < 아세트알데히드 < 프로피온알데히드 순서로 나타났다.

${\gamma}-Al_2O_3$ 촉매상에서 가수분해와 산화반응에 의한 $SF_6$ 촉매분해 특성 (Catalytic Decomposition of $SF_6$ by Hydrolysis and Oxidation over ${\gamma}-Al_2O_3$)

  • 이선화;박노국;윤석훈;장원철;이태진
    • 청정기술
    • /
    • 제15권4호
    • /
    • pp.273-279
    • /
    • 2009
  • 온실효과를 발생시킬 수 있는 $SF_6$는 고체 산 촉매상에서 물과 산소에 의해 가수분해 및 산화반응에서 황 및 불소화합물로 분해될 수 있다. 본 연구에서는 $SF_6$ 제거를 위한 고체 산 촉매로 ${\gamma}-Al_2O_3$가 사용되었으며, 반응온도와 공간속도에 따른 촉매활성이 조사되었다. 가수분해에 의한 촉매환성은 $20,000\;ml/g_{-cat}{\cdot}h$의 공간속도와 973 K이상의 반응온도 조건에서 $SF_6$ 전화율이 거의 100% 달하는 최대 값에 도달하였다. 공간속도가 $45,000\;ml/g_{-cat}{\cdot}h$이하에서 $SF_6$ 전화율은 최대값이 유지되었다. 한편, 동일한 반응조건에서 산화반응에 의한 $SF_6$ 전화율은 약 20%정도였다. ${\gamma}-Al_2O_3$는 가수분해과정 에서 ${\alpha}-Al_2O_3$, 산화반응과정에서 $AlF_3$로 각각 변화됨을 SEM과 XRD분석에 의해 확인되었다. 산화반응 후 $AlF_3$$20\;{\mu}m$이상 성장되었고, 이들의 촉매활성은 낮은 표면적 때문에 매우 낮아졌다. 그러므로 $SF_6$의 분해를 위한 촉매반응은 산화반응보다는 가수분해가 유리하다고 판단된다.

메탄올 수증기 개질반응에서의 상용촉매 비교연구 (A Comparative Study of Commercial Catalysts for Methanol Steam Reforming)

  • 박정은;박재현;임성대;김창수;박은덕
    • Korean Chemical Engineering Research
    • /
    • 제49권1호
    • /
    • pp.21-27
    • /
    • 2011
  • 메탄올 수증기 개질반응에 대한 적용가능성을 파악하기 위하여 메탄올 합성용 촉매인 ICI-M45와 수성가스 전환반응용 촉매인 MDC-3와 MDC-7을 비교 연구하였다. 또한 수성가스전환 반응에 대한 세 촉매의 비교실험도 수행하였다. 그 결과 MDC-7이 메탄올 수증기 개질반응에서 가장 높은 전화율을 보였으며, $H_2$$CO_2$ 생성속도 또한 높게 나타났다. 수성가스 전환반응용 촉매인 MDC-7과 메탄올 합성촉매인 ICI-M45를 이용하여 촉매 충진 방법에 따른 메탄올의 전화율에서의 변화를 살펴본 결과, MDC-7 단독보다 낮은 메탄올의 전화율을 보였다. 수성가스 전환반응에서도 DC- 7, MDC-3, 그리고 ICI-M45의 순으로 반응성이 감소하였다. 상기 두 반응에서 MDC-7이 가장 우수한 이유로는 높은 비표면적과 Cu의 분산도, 그리고 적절한 Cu와 Zn의 비율에 기인함을 확인할 수 있었다.

수정된 폴리올법으로 합성된 Pt/C를 이용한 산소환원반응성 및 고분자전해질 연료전지 성능 연구 (A Study on Catalytic Activity of Oxygen Reduction Reaction and Performance of PEMFC using Pt/C Synthesized by Modified Polyol)

  • 양종원;추천호;권용재
    • 에너지공학
    • /
    • 제23권3호
    • /
    • pp.157-162
    • /
    • 2014
  • 해당 연구에서는 수정된 폴리올법을 이용하여 합성한 카본블랙 탄소지지체의 Pt촉매의 전기적, 전기화학적 특성을 평가하였다. 또한 Polyol_Pt/C 촉매는 고분자전해질연료전지의 공기극에 적용하여 산소환원반응성을 측정하였다. 산소환원반응성과 고분자전해질연료전지 성능평가를 통해 상용 Pt/C (JM_Pt/C)촉매와 비교하여 전기화학적인 촉매성능을 비교하였다. 촉매의 활성표면적을 구하기 위해 순환전압전류주사법을 이용하였고, 산소환원반응성을 측정하기 위해 회전원판전극으로 선형주사전류법을 이용하였다. 또한 고분자전해질연료전지 완전지 성능 측정을 진행하였다. 그 결과 Polyol_Pt/C 촉매의 활성표면적 ($196m^2g^{-1}$)은 JM_Pt/C 촉매의 그 값 ($183m^2g^{-1}$) 보다 우수하였다. 촉매들의 산소환원반응성에 경우에도 Polyol_Pt/C 촉매는 JM_Pt/C 촉매보다 우수한 반파장전위 및 한계전류밀도를 나타내었다. 또한 완전지 평가시, MEA 공기극을 위한 Polyol_Pt/C 촉매 담지량을 기존의 0.4에서 0.15로 줄였을 때, 성능저하가 적게 나타났고, 300시간의 장기간 성능 평가에서도 연료전지 성능이 거의 일정하게 유지되었다. 이를 토대로 수정된 폴리올법에 의해 합성된 Polyol_Pt/C 촉매는 경제적인 이용 및 우수한 내구성을 가지고 있음을 밝혀내었다.

Mo-Al 복합 산화물의 질화반응 처리된 촉매상에서 암모니아 촉매 분해반응 (Catalytic Ammonia Decomposition on Nitridation-Treated Catalyst of Mo-Al Mixed Oxide)

  • 백서현;윤경희;신채호
    • Korean Chemical Engineering Research
    • /
    • 제60권1호
    • /
    • pp.159-168
    • /
    • 2022
  • MoO3 비율을 10-50 중량비로 변화하여 제조한 Mo-Al 복합 산화물 상에서 소성 후 승온 질화반응을 통하여 얻은 Mo-Al 질화물 상에서 암모니아 분해반응에서의 촉매 활성을 검토하였다. 제조된 촉매의 물리·화학적 특성을 알아보기 위하여 N2 흡착분석, X-선 회절분석(XRD), X-선 광전자분석법(XPS), 수소 승온환원(H2-TPR), 투과전자현미경(TEM) 분석을 수행하였다. 600 ℃에서 소성 후 Mo-Al 복합산화물은 γ-Al2O3와 Al2(MoO4)3 결정상을 나타냈으며 질화반응 후의 질화물은 비정형 형태를 보여주었다. 질화반응 후의 비표면적은 MoO3의 위상전환반응에 의해 Mo 질화물 형성으로 인해 증가하였으며, Mo 질화물이 γ-Al2O3에 담지된 형태를 보여주었다. 암모니아 분해반응에서의 촉매 활성은 40 wt% MoO3가 가장 좋은 활성을 보여주었고, 질화반응 시간이 증가함에 따라 활성이 증가하였으며 이에 따라 활성화에너지 감소 효과를 나타냈다.

컴팩트 개질기용 수성가스전이 반응에서 Cu-Ce0.8Zr0.2O2 촉매에 Cu 담지량이 미치는 영향 (The Effect of Cu Loading on the Performance of Cu-Ce0.8Zr0.2O2 Catalysts for Single Stage Water Gas Shift Reaction)

  • 김학민;전경원;나현석;장원준;정대운
    • 한국수소및신에너지학회논문집
    • /
    • 제28권4호
    • /
    • pp.345-351
    • /
    • 2017
  • Single stage water-gas shift reaction has been carried out at a gas hourly space velocity of $150,494h^{-1}$ over $Cu-Ce_{0.8}Zr_{0.2}O_2$ catalysts prepared by a co-precipitation method. Cu loading was optimized to obtain highly active co-precipitated $Cu-Ce_{0.8}Zr_{0.2}O_2$ catalysts for single stage water-gas shift reaction. 80 wt.% $Cu-Ce_{0.8}Zr_{0.2}O_2$ exhibited the excellent catalytic performance as well as 100% $CO_2$ selectivity (CO conversion = 27% at $240^{\circ}C$ for 50 h). The high activity and stability of 80 wt.% $Cu-Ce_{0.8}Zr_{0.2}O_2$ are correlated to low activation energy and large amount of surface Cu atoms.

Polymer Electrolyte Membrane Fuel Cells용 Pt/C 캐소드 전극촉매 특성에 미치는 반응 온도 (Various Temperatures Affecting Characteristics of Pt/C Cathode Catalysts for Polymer Electrolyte Membrane Fuel Cells)

  • 유성열;강석민;이진아;이충균;류호진
    • 한국재료학회지
    • /
    • 제21권3호
    • /
    • pp.180-185
    • /
    • 2011
  • This study is aimed to increase the activity of cathodic catalysts for PEMFCs(Polymer Electrolyte Membrane Fuel Cells). we investigated the temperature effect of 20wt% Pt/C catalysts at five different temperatures. The catalysts were synthesized by using chemical reduction method. Before adding the formaldehyde as reducing agent, process was undergone for 2 hours at the room temperature (RT), $40^{\circ}C$, $60^{\circ}C$, $80^{\circ}C$ and $100^{\circ}C$, respectively. The performances of synthesize catalysts are compared. The electrochemical oxygen reduction reaction (ORR) was studied on 20wt% Pt/C catalysts by using a glassy carbon electrode through cyclic voltammetric curves (CV) in a 1M H2SO4 solution. The ORR specific activities of 20wt% Pt/C catalysts increased to give a relative ORR catalytic activity ordering of $80^{\circ}C$ > $100^{\circ}C$ > $60^{\circ}C$ > $40^{\circ}C$ > RT. Electrochemical active surface area (EAS) was calculated with cyclic voltammetry analysis. Prepared Pt/C (at $80^{\circ}C$, $100^{\circ}C$) catalysts has higher ESA than other catalysts. Physical characterization was made by using X-ray diffraction (XRD) and transmission electron microscope (TEM). The TEM images of the carbon supported platinum electrocatalysts ($80^{\circ}C$, $100^{\circ}C$) showed homogenous particle distribution with particle size of about 2~3.5 nm. We found that a higher reaction temperature resulted in more uniform particle distribution than lower reaction temperature and then the XRD results showed that the crystalline structure of the synthesized catalysts are seen FCC structure.