• 공업화학
• /
• 제19권6호
• /
• pp.583-591
• /
• 2008

최근 휴대용 전자기기 수요의 급증에 따라 기존에 사용되던 2차 전지를 대체할 수 있는 친환경 고효율 연료전지 개발의 필요성이 증대되었다. 이러한 목적으로 개미산을 연료로 이용하는 직접 개미산 연료전지가 부각되고 있다. 식품첨가물로 사용될 정도의 안정성, 전해질을 통과하는 연료의 최소화된 crossover, 큰 기전력 발생에 의한 반응활성 최대화 등이 개미산이 가지고 있는 고유의 장점들이며, 이와 더불어 반응 촉매 및 전지 디자인을 최적화 하려는 노력에 의해 직접 개미산 연료전지의 성능 및 안정성이 향상되고 있다. 이러한 개발을 통해 현재까지 약 $300mW/cm^2$ 이상의 전력밀도를 나타내는 전지 개발이 이루어졌다. 본 총설에서는 개미산 연료전지의 기본 구동 원리와 전지 구조에 대한 소개 및 직접 개미산 연료전지 성능 향상에 영향을 미치는 인자들인 연료극 촉매 및 전해질 개발, 최적화된 전지 구조 디자인 등의 개발 현황 및 앞으로 나아갈 방향에 대해 논의하고자 한다.

• 한국수소및신에너지학회논문집
• /
• 제21권3호
• /
• pp.193-200
• /
• 2010

Anode off-gas of high temperature fuel cell still contains combustible components such as hydrogen, carbon monoxide and hydrocarbon. In this study, a catalytic combustor has been applied to the high temperature fuel cell so that the combustion of anode-off gas can be boosted up. Since the performance of catalytic combustor directly depends on the combustion catalyst, this study is designed to perform the experimental investigation on the combustion characteristics of the three commercial catalysts with a different composition. Screening tests with three catalysts are preceded before the performance examination since it is necessary to determine the most suitable catalyst for design configuration of the catalytic combustor. The performance analysis shows that methane conversion rate strongly depends on gas hourly space velocity (GHSV) as well as inlet gas temperature. Additionally, the GSHV optimization results show that the optimum GHSV will be in the range between 18,000 $hr^{-1}$ and 36,000 $hr^{-1}$. It is also shown that the minimum inlet temperature of catalytic reaction of methane is from $100^{\circ}C$ to $150^{\circ}C$.

• Journal of Electrochemical Science and Technology
• /
• 제12권1호
• /
• pp.137-145
• /
• 2021

Among the non-precious metal catalysts, iron-nitrogen doped carbon (Fe-N/C) catalysts have been recognized as the most promising candidates for an alternative to Pt-based catalysts for the oxygen reduction reaction (ORR) under alkaline and acidic conditions. In this study, the nano replication method using mesoporous silica, which features tunable primary particle sizes and shape, is employed to prepare the mesoporous Fe-N/C catalysts with different shapes. Platelet SBA-15, irregular KIT-6, and spherical silica particle (SSP) were selected as a template to generate three different kinds of shapes of the mesoporous Fe-N/C catalyst. Physicochemical properties of mesoporous Fe-N/C catalysts are characterized by using small-angle X-ray diffraction, nitrogen adsorption-desorption isotherms, and scanning electron microscopy images. According to the electrochemical evaluation, there is no morphological preference of mesoporous Fe-N/C catalysts toward the ORR activity with half-cell configuration under alkaline electrolyte. By implementing X-ray photoelectron spectroscopy analysis of Fe and N atoms in the mesoporous Fe-N/C catalysts, it is possible to verify that the activity towards ORR highly depends on the portions of "Fe-N" species in the catalysts regardless of the shape of catalysts. It was suggested that active site distribution in the Fe-N/C is one important factor towards ORR activity.

• 공업화학
• /
• 제22권3호
• /
• pp.323-327
• /
• 2011

원통형으로 성형된 zeolite sheet (제올라이트를 함유하는 세라믹 종이)는 VOC 제거를 위한 효과적인 흡착로터로서 사용될 수 있다. 본 연구에서는 ZSM-5가 함유된 zeolite sheet 지지체에 Pt를 담지한 후 톨루엔 연소 촉매 성능을 ${\gamma}-Al_2O_3$ 및 cordierite honeycomb 지지체에 담지된 Pt 촉매와 비교하였다. Pt/zeolite sheet 촉매는 $Pt/{\gamma}-Al_2O_3$ 또는 Pt/cordierite honeycomb 촉매에 비하여 톨루엔 연소반응에 높은 활성을 나타냈다. 한편, Pt/zeolite sheet 촉매를 상온에서 $NH_3-H_2O$ 증기로 전처리하면 zeolite sheet에 담지된 Pt 입자의 분산도가 향상되었으며, 톨루엔 연소 촉매 활성이 크게 증가하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.519-520
• /
• 2006

Research was performed to increase the efficiency of a plasma reactor for $H_2$ yield. In the preceding studies $H_2$ was increased by adding Ni as a transitional metal catalyst and $TiO_2$ as a photocatalyst. In these experiments, it was found that distilled water, discharge frequency, and electrode configuration had a significant impact on $H_2$ generation. A substantial amount of hydrogen yield was observed at 2 kHz of discharge frequency and 12 kV of applied voltage. Within this favorable discharge conditions, the weight rate of $TiO_2$ and Ni powders was investigated. Plasma phenomenon was measured by electrical, optical and acoustical devices. It was found that emitted light, electric current and acoustical signals acquired from the discharge demonstrated systematical correlation. Changing the electrode's configuration allowed discharge distribution along the perimeter of the electrode's tip, which increased the density of streamers and plasma energy loadings, as the value of inception voltage for the discharge propagation decreased.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.508-511
• /
• 2004

This study focused on the effect of autonomic microcapsules on the mechanical properties of structural material. Several types of microcapsules with healing agents were manufactured by varying agitation speed of high speed stirrer. The size distribution of microcapsules was measured by a particle size analzer. The epoxy specimens embedded with microcapsules were manufactured and the degree of cure of such epoxy specimen was measured by a differential scanning calorimetry. The tensile modulus and tensile strength in epoxy specimens embedded with microcapsules were evaluated in order to investigate the effects of microcapsules on mechanical properties of structural materials. The configuration of microcapsules and morphology of fracture surfaces for the epoxy specimen were examined by an optical microcope and a scanning electron microscope. According to the results, tensile strength of the epoxy specimen embedded with microcapsules was indicated a little reduction, but tensile modulus was not much affected on microcapsules.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.340-343
• /
• 2006

In this paper, heat and mass transfer characteristics through experimental and numerical study are extensively investigated in steam reform ins reactor under given operating conditions. In order to get simulated data at outlet of the reformer, heterogeneous reactor model is incorporated. As the reaction also takes place in porous media, two medium approach is used to take into account thermally non-equilibrium phenomena between catalyst and bulk gas. In steam reforming reaction, heat transfer issue is so significant that geometrical configuration study is also conducted.

• 한국산학기술학회논문지
• /
• 제19권1호
• /
• pp.63-68
• /
• 2018

본 논문은 이산화탄소 고정 과정이 포함된 인공 광합성 과정을 모사하기 위하여 지구상에 흔히 존재하는 촉매 재료를 이용해 개발한 광화학 반응 시스템(인공나뭇잎)과 시스템 에너지 포집 및 변환 능력에 대한 성능을 조사하기 위한 기초 연구 결과를 제시한다. 본 연구에서 개발한 시스템은 태양광 전지의 전면부에 산화코발트를 도핑 하여 물의 전기분해로 인한 산소 발생이 태양전지 표면에서 직접 발생하도록 하였고, 후면 기판 표면에는 이산화탄소 변환 반응을 위한 효율적인 촉매로 $MoS_2$를 도핑 하여, 전선이 없는 구조로 구성하였다. 직접 태양광 연료 변환 시스템은 약4.5%로 이산화탄소를 일산화탄소와 수소로 변환하여 지속 가능한 연료(합성가스)의 형태로 생산하며, 이는 음극에서 촉매 변환 효율이 75%이상이 될 수 있음을 의미한다. 본 연구는 물의 광분해뿐만 아니라 태양광에 의해 유도된 이산화탄소 전환 과정을 하나의 시스템에서 동시에 실현하여 자연적 광합성 과정을 좀 더 성공적으로 모사할 수 있는 시스템 개발에 기여하였다.

• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.131-138
• /
• 2010

Because real flow of engine exhaust is very hot and highly transient, it may cause thermal and inertial loads on catalyzed filters in DPF. Transient and detailed flow and thermal simulations are necessary in this field. To assess the importance of time dependent phenomena, typical cone-type configuration such as an underbody DPF is selected for steady and transient analysis. User defined functions of FLUENT by sinusoidal inlet velocities are written and integrated with main solver for realistic simulation. Also, 4-cylinder and 6-cylinder engines for 3,000 L class are considered for the dynamic exhaust effect of engine type. Key parameters to understanding of catalyst performance and durability issues such as flow uniformity index and peak velocity are investigated. Also, pressure drop for engine power are considered. From the simulation results for three different cases, proper approach is recommended.

• 한국세라믹학회지
• /
• 제47권1호
• /
• pp.92-96
• /
• 2010

Based on the differential electrode equilibria approach, potentiometric YSZ sensors with semiconducting oxide electrodes for CO detection are developed. To improve the selectivity, sensitivity and response-time of the sensor, our strategy includes (a) selection of an oxide with a semiconducting response to CO, (b) addition of other semiconducting materials, (c) addition of a catalyst (Pd), (d) utilization of combined p- and n-type electrodes in one sensor configuration, and (e) optimization of operating temperatures. Excellent sensing performance is obtained by a novel device structure incorporating $La_2CuO_4$ electrodes on one side and $TiO_2$-based electrodes on opposite substrate faces with Pt contacts. The resulting response produces additive effects for the individual $La_2CuO_4$ and $TiO_2$-based electrodes voltages, thereby realizing an even higher CO sensitivity. The device also is highly selective to CO versus NO with minor sensitivity for NO concentration, compared to a notably large CO sensitivity.