• 한국기계가공학회지
• /
• 제6권4호
• /
• pp.65-70
• /
• 2007

In this study, we analyzed about that after design form manufacture master pattern in Rapid Prototyping-RP through design program, processes to manufacture prototype using Vacuum Casting. In Rapid Prototyping-RP, there is an en-or by shrinkage of resin and, in Vacuum Casting, there is an error by shrinkage of silicon. To select condition which shrinkage become the minimum of each process, manufactured prototype after using Full Factorial Design of Design of Experiments, We could confirm shrinkage using reverse engineering and that result came into effect ANOVA 2-way. We applied errors of each process to master pattern, and then presented the method to improve flood control precision of prototype of Vacuum Casting.

• 한국공작기계학회논문집
• /
• 제15권6호
• /
• pp.127-133
• /
• 2006

Rapid prototyping technologies have been widely used to reduce the development cost of new products. Manufacturing industries are nowadays characterized by the flexibility and complexity of products. This to due to the rapid development of manufacturing technology and diverse needs of customers. In this paper, the best homing out and casting condition for getting casting product of resin pattern(photopolymer) have been examined experimentally. In generally, the burning out and casting conditions have effect on the casting products. Using the direct casting. we directly Producted the Jewelry. And in this paper, we used only gypsum. Many study of casting for resin have been used to dental investment. A dental investment is good for resin casting. but dental investment is too hard and not useful on the jewelry casting. Therefore we need to find the way of resin casting by gypsum.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.322.2-322
• /
• 2002

Vibration table is required to obtain high packing density in lost form casting process. Packing density, which is important manufacture factor, depends on the vibration pattern induced by vibration table. In general, circular vibration pattern is recognized as the best pattern. The existing vibration table is investigated to identify current vibration pattern and consider a countermeasure. Modal test is utilized to identify the dynamic characteristics of vibration table, and finite element method is used to present the improved design

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.269-274
• /
• 2003

Vibration table is required to obtain high packing density in expendable pattern casting process. Packing density, which is an important manufacture factor, depends on the vibration pattern induced by vibration table. Modal test is utilized to identify the dynamic characteristics of vibration table. And finite element method is used to modify flask by fixing the stiffener. The positions of stiffener to modify are found and the natural frequency could be easily shifted to the objective value by using sensitivity analysis.

• 한국주조공학회지
• /
• 제12권4호
• /
• pp.285-292
• /
• 1992

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.406-410
• /
• 2004

Rapid prototyping technologies have been widely used to reduce the development cost of new products. Manufacturing industries are nowadays characterized by the flexibility and complexity of products. This to due to the rapid development of manufacturing technology and diverse needs of customers. In this paper, the burning condition for getting casting product of resin pattern have been examined experimentally. In generally, the burning conditions have effect on the casting products. Using the direct casting. we directly producted the jewelry.

• 한국융합학회논문지
• /
• 제8권3호
• /
• pp.169-176
• /
• 2017

주조의 공정으로는 왁스패턴(wax pattern), 매몰(Investment), 탈왁스(Dewaxing)와 소성(Curing), 주물(Casting)등으로 나눌 수 있으며, 이러한 공정이 하나라도 소홀하게 되면 좋은 결과를 얻을 수 없게 된다. 2000년 이후, 3D 프린터가 발전되고 사용 횟수가 증가하였으나, 왁스 방식보다 광경화수지 방식의 프린터를 선호함으로 그의 따른 주물 결함이 더 심해지고 있다. 이러한 결함을 해결하기 위해 기존 왁스방식의 주조 결함을 선행논문을 통해 제시하였고, 특히 광경화수지 방식의 결함은 매몰과 탈왁스, 탈수지와 소성에서 기존과 다른 차이를 보였다. 이에 주조 실험을 통해 결과를 제시 하였으며, 특히 기존 방식의 승온곡선이 아닌 광경화수지만의 승온곡선을 제시하였다. 마지막으로 다이렉트 주조가 되지 못하는 것을 분류하고 형틀(Mold)제작에 대하여 제시하였다. 이에 본 연구를 통해 3D 프린터를 사용하는 사용자 또는 광경화수지를 다이렉트로 주조하려는 이들에게 조금이나마 도움이 되고자 한다.

• 한국주조공학회지
• /
• 제23권2호
• /
• pp.86-93
• /
• 2003

It has been a major concern in the foundry that steel castings manufactured by the evaporative pattern casting process encounter the carbon pick-up problem. A carbon rich layer at the evaporative pattern cast surface is a result of interactions between the gaseous products from foamed polystyrene and the molten metal. The carburized layer with a high hardness makes it difficult to machine the casting. In this study, the influence of the density of EPS pattern and coatings on carbon pick-up phenomena of S25C and S45C commercial carbon cast steel were investigated. As the density of EPS pattern is increased, the carbon concentration of decomposed pattern is increased and the thickness of carburized layer at the surface of steel castings is increased. Also as the density of coatings is increased, the permeability of coatings is decreased and the thickness of carburized layer at the surface of steel castings is increased. S25C steel which has lower original carbon content compared to S45C steel exhibited severe carburization.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.52-57
• /
• 1999

Funtional metal prototypes are often required in numerous industrial applications. These components are typically needed in the early stage of a project to determine form, fit and function. Recent R/P(Rapid Prototyping) part are made of soft materials such as plastics, wax, paper, these master models cannot be employed durable test in real harsh working environment. Parts by direct metal rapid tooling method, such as laser sintering, by now are hard to get net shape, pores of the green parts of powder casting method must be infiltrated to get proper strength as tool, and new type of 3D direct tooling system combining fabrication welding arc and cutting process is reported by song etc. But a system which can build directly 3D parts of high performance functional material as metal part would need long period of system development, massive investment and other serious obstacles, such as patent. In this paper, through the rapid tooling process as silicon rubber molding using R/P master model, and fabricate wax pattern in that silicon rubber mold using vacuum casting method, then we tranlsated the wax patterns to numerous metal prototypes by new investment casting process combined conventional investment casting with rapid pototyping & rapid tooling process. with this wax-injection-mold-free investment casting, we developed new investment casting process of fabricating numerous functional metal prototypes from one master model, combined 3-D CAD, R/P and conventional investment casting and tried to expect net shape measuring total dimension shrinkage from R/P part to metal part.

• 대한치과보철학회지
• /
• 제16권1호
• /
• pp.45-47
• /
• 1978

We use investment to retain the mould of the wax pattern in making dental metal castings. A fin on the metal casting is occasionally formed due to several factors. The factors making the fin are improper burn out time and temperature, improper W/P ratio of investment and lining of asbestos in casting ring. The purpose of this study is to investigate the effect of W/P ratio of investment on the fin formation. Except the W/P ratio of investment which used to invest the wax pattern, the study was done under same condition; burn out time and temperature, W/P ratio of refractory cast(W/P=0.12) and asbestos lining in casting ring. The obtained result is that the fin is more likely to be formed on the casting which invested with higher W/P ratio of investment to that of refractory cast.