• 대한전자공학회논문지SP
• /
• 제38권2호
• /
• pp.138-148
• /
• 2001

디지털 캠코더에서 이용하는 영상 압축 방식인 DY 부호화 방식은 DCT와 가변장 부호화 방식을 이용한다. DV 방식은 하드웨어 복잡도가 낮은 반면 압축된 비트율이 악 26Mb/s로 높은 편이다. 따라서 스튜디오에서 낮은 복잡도로 영상을 부호화 한 후 VOD 시스템에 이용하기 위하여 MPEG-2로 변환부호화 할 필요가 있다. 이때의 두 압축방식이 DCT를 이용하므로, DCT 영역에서 변환부호화 하면 중간 과정을 줄일 수 있어서 계산상의 복잡도를 줄일 수 있다. DV 방식에서 MPEG-2 인트라로 변환부호화 시에, DV 방식의 4:1:1 색차 포맷을 MPEG-2의 4:2:2 영상 포맷으로 변환할 때 와 2-4-8 DCT 모드에서 8-8 DCT 모드로 변환 시 변환 영역에 있는 데이터에 미리 계산된 행렬을 곱함으로써 병렬처리가 가능하게 하였다. MPEG-2 율제어 시에 서브 블록의 분산을 완전히 DCT 영역에서 계산하였다. 실험을 통하여 제안한 방식들을 검증하였다. MPEG-2 인터 프레임 부호화로 변환 부호화 할 때 DCT 계수를 이용하여 계층적으로 움직임을 추정하였다. 먼저 4개의 서브 블록에 있는 4개의 DC 값으로 하나의 매크로 블록에 대한 움직임을 추정한 다음 각 서브 블록의 저주파수에 해당하는 2×2에 IDCT를 취하여 16 포인트로 구성된 매크로 블록을 만든 후 이에 대한 움직임을 추정하며, 다섯 번째 단계에서 서브 화소에 대한 움직임을 추정함으로써 움직임 추정을 마친다. 탐색영역을 겹치는 방식이 겹치지 않는 방식보다 좋은 PSNR값을 보여 주었다.

• 한국수정란이식학회지
• /
• 제33권3호
• /
• pp.129-137
• /
• 2018

Acute vascular rejection has been known as a main barrier occurring in a xenograted tissue of alpha 1,3-galactosyltransferase knock-out (GalT KO) pig into a non-human primate (NHP). Adenosine which is a final metabolite following sequential hydrolysis of nucleotide by ecto-nucleotidases such as CD39 and CD73, act as a regulator of coagulation, and inflammation. Thus xenotransplantation of CD39 and CD73 expressing pig under the GalT KO background could lead to enhanced survival of recipient NHP. We constructed a human CD39 and CD73 expression cassette designed for endothelial cell-specific expression using porcine Icam2 promoter (pIcam2-hCD39/hCD73). We performed isolation of endothelial cells (pAEC) from aorta of 4 week-old GalT KO and membrane cofactor protein expressing pig ($GalT^{-MCP/-MCP}$). We were able to verify that isolated cells were endothelial-like cells using immunofluorescence staining analysis with von Willebrand factor antibody, which is well known as an endothelial maker, and tubal formation assay. To find optimal condition for efficient transfection into pAEC, we performed transfection with GFP expression vector using four programs of nucleofection, M-003, U-023, W-023 and Y-022. We were able find that the program W-023 was optimal for pAEC with regard to viability and transfection efficiency by flow cytometry and fluorescent microscopy analyses. Finally, we were able to obtain $GalT^{-MCP/-MCP}/CD39/CD73$ pAEC expressing CD39 and CD73 at levels of 33.3% and 26.8%, respectively. We suggested that pACE isolated from $GalT^{-MCP/-MCP}$ pig might be provided as a basic resource to understand biochemical and molecular mechanisms of the rejections and as an alternative donor cells to generate $GalT^{-MCP/-MCP}/CD39/CD73$ pig expressing CD39 and CD73 at endothelial cells.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1621-1621
• /
• 2001

The quality of sugarcane grown on the NE Australian tropical coast ($16^{\circ}$15'- $18^{\circ}$15' S Lat.) has declined markedly in the past seven years. This has been linked to dilution of mill-supply cane with increasing levels of non mature-stalk material consisting of leaves and sucker culms. The prime research objective was to examine the transition from the pre-harvest, in-field crop to harvested material sent for processing, in terms of quality and crop fraction proportions. A secondary objective was to quantify the effects of preharvest-season crop habit and culm condition on crop quality. Ten quadrat samples from each of 54 random crop sites (17 in 1999 and 37 in 2000), covering a wide range of variables (cultivar, crop class, and edaphic, topographic, climatic, and temporal factors) were collected immediately before harvest. Samples were partitioned into four fractions:- sound and unsound mature stalks (culms), sucker culms, and extraneous matter (leaves). Material harvested from each site was sampled and partitioned into four fractions:- sound and unsound billets (culm pieces), culm-spindle pieces, and leaf. In 2000, before harvest, 14 additional sites were sampled monthly, on three occasions, from March - June. Erect and non-erect culms were divided into sound and unsound classes. All samples were disintegrated and presented to a remote reflectance module of a scanning spectrophotometer using the BSES large cassette module. Near infra-red spectroscopic (NIS) analyses were developed for the rapid determination of quality components (Brix, commercial cane sugar (CCS), fibre, moisture, and polariscope reading). Calibrations for three material groups (culm (n = 639), non-culm (n = 496), and combined) were developed for all components using the 1999 data set. Two sub-sets (n = 178, and 190) of about 10% of the preharvest-season and harvest populations scanned in 2000 also were subjected to full routine laboratory analyses. The 1999 combined calibrations were excellent, but the culm calibrations produced consistently lower standard errors. Non-culm calibrations were marginally better than the combined for only CCS and pol. reading. Analysis of the 2000 culm data with calibrations using all 1999 and 2000 culm data resulted in better predictions relative to the 1999 culm calibrations. This also was true for the combined calibrations. Assessment of quality components in pre- and post-harvest sugarcane using NIS calibrations was more cost effective than using routine laboratory techniques. Outcomes from this NIS-facilitated research will have important economic consequences for the Australian sugarcane industry. Potential CCS present in mature culms is being discounted by dilution with leaves and sucker culms, threatening farm viability. The results question the efficacy of current harvesting technology. The CCS of harvested cane is improved only marginally over that of the in-field crop. Current harvesting technology requires either supplementary, innovative pre-mill processing or a design revolution to improve mill-supply cane quality, and therefore whole of industry economics. NIS-facilitated analyses, before the harvest season, highlighted the benefits of growing erect, sound crops. Loss of CCS then, can be minimized only by a combination of crop improvement and agronomic solutions, applied as part of sound on-farm management.

• 한국의학물리학회지:의학물리
• /
• 제29권1호
• /
• pp.1-7
• /
• 2018

The $TomoTherapy^{(R)}$ beam-delivery method creates helical beam-junctioning patterns in the dose distribution within the target. In addition, the dose discrepancy results in the particular region where the resonance by pattern of dose delivery occurs owing to the change in the position and shape of internal organs with a patient's respiration during long treatment times. In this study, we evaluated the dose pattern of the longitudinal profile with the change in respiration. The superior-inferior motion signal of the programmable respiratory motion phantom was obtained using AbChes as a four-dimensional computed tomography (4DCT) original moving signal. We delineated virtual targets in the phantom and planned to deliver the prescription dose of 300 cGy using field widths of 1.0 cm, 2.5 cm, and 5.0 cm. An original moving signal was fitted to reflecting the beam delivery time of the $TomoTherapy^{(R)}$. The EBT3 film was inserted into the phantom movement cassette, and static, without the movement and with the original movement, was measured with signal changes of 2.0 s, 4.0 s, and 5.0 s periods, and 2.0 mm and 4.0 mm amplitudes. It was found that a dose fluctuation within ${\pm}4.0%$ occurred in all longitudinal profiles. Compared with the original movement, the region of the gamma index above 1 partially appeared within the target and the border of the target when the period and amplitude were changed. Gamma passing rates were 95.00% or more. However, cases for a 5.0 s period and 4.0 mm amplitude at a field width of 2.5 cm and for 2.0 s and 5.0 s periods at a field width of 5.0 cm have gamma passing rates of 92.73%, 90.31%, 90.31%, and 93.60%. $TomoTherapy^{(R)}$ shows a small difference in dose distribution according to the changes of period and amplitude of respiration. Therefore, to treat a variable respiratory motion region, a margin reflecting the degree of change of respiration signal is required.

• 한국산업보건학회지
• /
• 제6권1호
• /
• pp.97-108
• /
• 1996

A new type of passive samplers were designed and produced by authors. After evaluating the quality of activated carbon by measuring recovery rate of organic vapors and steadiness of sampling rate, activated carbon with 30 - 35 mesh produced by Company S in Korea was selected. In each passive sampler, an amount of 400 mg of the activated carbon was filled in 25-mm cassette and covered by fixed screen (or wire screen with 100 mesh). In addition to the fixed screen, a wind screen (or wire screen with 300 mesh) was also attached at outer face. The sampling rate of the new Korean passive samplers was estimated Conclusions obtained in the study are as follows. 1. Sampling rates of the newly developed Korean passive samplers were affected by sampling time. For n-hexane, sampling rates of 15- and 60-minute samples were 70.92 and 37.45 ml/min, respectively. Sampling rate of both 200- and 450-minute samples was 25.96 ml/min. It is concluded that, when passive samplers are used for measuring organic vapors, samples be collected longer than 60 minutes. 2. Sampling rate of the passive samplers was also affected by airborne concentration of organic vapors. Lower sampling rates were determined at level of 1/2 threshold limit values (TLVs) recommended by the American Conference of Governmental Industrial Hygienists (ACGIH). It is recommended that sampling rate of the passive samplers be obtained at site by measuring concentrations using both the NIOSH Method and passive samplers simultaneously. 3. When the passive samplers, which collected organic vapors, were exposed to clean air for five hours, there was no significant loss of organic vapors due to reverse diffusion. 4. When samples were stored at room temperature ($21.8{\pm}0.7^{\circ}C$) and refrigerator ($3.8{\pm}0.7^{\circ}C$), there was no significant difference in the accuracy of results. For trichloroethylene and n-hexane, accuracies were within 25 % at both temperatures until seven days. However, poor accuracy exceeding 25 % was indicated in toluene from the first day. It is recommended that samples be stored at freezing temperature below $0^{\circ}C$. 5. Sampling efficiency was significantly affected by direction of the passive samplers. Results of samplers facing wind and down, respectively, were compared. Lower amount of organic vapors were collected when the sampler was oriented down. It is recommended that, when air velocity is low in plants, the passive samplers be oriented to the wind. However, when air velocity is high, the passive samplers be oriented down.

• 한국방사선학회논문지
• /
• 제7권5호
• /
• pp.365-369
• /
• 2013

PET(positron emission tomography)을 촬영하기 위해서는 방사선 의약품 동위원소를 사용하여 인체 내에 정맥주사를 한다. 이 경우 대표적으로 사용하는 방사선 의약품은 $^{18}FDG$ (Fluorodeoxyglucose)이다. 의료용 싸이크로트론으로 생산하는 $^{18}F$에 deoxyglucose를 합성하기 위해서 합성용 카세트장치가 필요하다. 방사성 의약품 제조시에는 많은 양의 2차 방사선이 발생이 된다. 따라서 2차 방사선을 차폐하기 위하여 핫셀(Hot cell)을 사용한다. 우리는 $^{18}FDG$ 합성 또는 분배시에 핫 셀 외부로 유출되는 선량을 측정하였다. 이번 실험은 $^{18}FDG$ 제조 작업시에 의도하지 않게 발생할 수 있는 방사선 작업종사자의 피폭에 관한 선량정보를 제공하기 위함이다. 결론적으로 핫셀 내부에서 외부로 $^{18}FDG$ 합성시에 선량이 유출됨을 확인 할 수 있었다. 특히 핫셀에서 핫셀 내부를 볼 수 있는 납유리에서 외부로 방사선이 유출되는 것을 알 수 있었다. 결론적으로 $^{18}FDG$ 합성시 방사선 작업종사자의 피폭선량을 감소하기 위해서는 핫셀 존재하는 납유리의 개선점이 필요할 것으로 사료된다.

• 한국미생물·생명공학회지
• /
• 제47권4호
• /
• pp.667-672
• /
• 2019

본 연구는 출아효모 Saccharomyces cerevisiae을 이용해 이종 유전자(heterologous gene)를 효모염색체내에 도입하여 안정적으로 발현하기 위한 시스템의 비교에 대해서 연구하였다. 반복적으로 사용할 수 있는 Cre/loxP system의 이용을 위해 C. glabrata 유래 유전자를 선택마커로 사용하였고, universal pRS-CMT vector를 이용한 4종의 유전자(XYLP, XYLB, GRE3 및 XYL2 유전자)를 모델 유전자로 cloning하였다. 구축된 pRS-XylP, pRS-XylB, pRS-Gre3 및 pRS-Xyl2 plasmid를 이용한 4번의 sequential integration을 통해 효모염색체내에 도입된 4종의 유전자를 순차적으로 발현시킬 수 있었다. 또한 4종의 유전자 발현 cassette를 동시에 가지는 pRS-PBG2 plasmid에 의한 one-step integration을 통해서, 도입될 유전자들의 순서를 정할 수 있었으며 각 유전자들의 동시발현을 안정적으로 유지할 수 있었다. 결론적으로 본 연구에서 사용한 4종의 유전자들의 염색체내 동시 integration 및 발현을 위해서는 one-step integration이 효과적임을 확인하였으며, 적절한 유전자 도입방법을 통해 산업적으로 유용한 생물시스템의 손쉬운 육종이 가능하리라 기대한다.

• 한국산업보건학회지
• /
• 제7권2호
• /
• pp.196-208
• /
• 1997

This study was performed to estimate quartz contents in the both bulk and airborne dust samples and to determine particle size distribution of airborne dust from the selected foundry operations. Total dust samples were collected by a 37mm cassette and respirable by a 10 mm nylon cyclone. Particle size distributions were determined by a Marple's 8-stage cascade impactor at the melting, molding, shakeout and finishing operations. The presence of elements in the dust samples were confirmed by the scanning electron microscopy equipped with the energy dispersive x-ray spectrometry. The quartz contents were estimated using the intensity of the absorption peak of quartz at 799 cm-l by the Fourie Transformed Infrared Spectroscopy (FTIR). The results were as follows: 1. The analysis of data from cascade Impactor showed bimodal distributions of particle size at the melting, molding and shakeout operations. Mass median aerodynamic diameters for the distributions determined by histogram were $0.48-1.65{\mu}m$ for small and $13.43-19.58{\mu}m$ for large modes. In the dust samples collected at the finishing operations, however, only a large mode of $18.89{\mu}m$ was found. 2. The percentages of total to respirable dust concentration calculated from the impactor data ranged from 42 % to 66 %. The average concentrations of respirable dust by cyclone were $0.85-1.28mg/m^3$ collected from the workers, and were $0.23-0.56mg/m^3$ from the areas surveyed. Dust concentrations of personal samples were statistically significantly higher than those of area samples. The highest dust concentration was obtained from the personal samples of the finishing operation. 3. The mean percentages of silicon and oxygen estimated by SEM-EDXA in the bulk samples ranged from 35.83 % to 36.02 % and from 39.93 %-41.64 %, respectively. 4. The average quartz contents estimated by FTIR in the respirable dust from personal samples ranged from 4.32 % to 5.36 % and 4.54 % to 4.70 % in the bulk samples. No statistical difference of quartz content was found between foundry operations. In this study, quartz content was quantified by FTIR. Although no statistically significant difference in quartz content between airborne and bulk, samples and between different foundry operations was found, it is recommended that quartz content in the individual sample of respirable dust be analyzed and the results be used either to select an applicable quartz limits or to calculate the exposure limit. Further studies, however, are needed to compare the results by FTIR and XRD since it is reported that the quartz content determined by FTIR is different from that by XRD.

• 한국가정과교육학회지
• /
• 제9권1호
• /
• pp.1-17
• /
• 1997

This study was conducted to obtain basic materials to improve the teaching method of Home Economics by theoretically looking into the supplementary teaching materials or implements usable in teaching Costume History area. And based on these data, the types and the applications of the supplementary teaching materials or implements highschool owned were examined. The subjects of this study were 111 Home Economics and Housework curriculum highschool teachers who give a lecture in the country by using self-administered questionnaires. SAS program was used to calculate frequency, percentage, average, standard deviation, and $\chi$(sup)2-test analysis. The results of the study were as follows； 1. Most of the highschool teachers used the school expenses for experiments in preparing the supplementary teaching materials or implements. 2. Of the supplementary teaching materials and implements concerning Costume History, visual implements such as slides and pictures were the mostly owned. CD and audio implements as cassette-tapes were not used. 3. Most of the teachers recognized the importance of the audio-visual teaching materials and implements concerning Costume History. 4. Among the audio-visual materials and implements concerning Costume History by which can be made by school teachers of Home Economics and Housework curriculum, the mostly used one was ‘cutting pictorials from magazines and newspapers’, and the next were ‘orbital materials’, and ‘copy the pictorials’, and the least was ‘recording from the radio’. 5. Most of the annual expenses assigned to the department of Home Economics was used in cooking practice, and the least of the expenses was assigned in buying audio-visual teaching materials and implements. 6. Time assigned to the area of Home Economics was for the most part one or two hours per week, and among this, time assigned to the history of western costume and the history ok korean costume was for the most part five to eight hours. 7. The areas that the highschool teachers felt difficulties mostly during clothing and textiles curriculum were ‘textiles’and the next were ‘knitting’, ‘western costume history’, and ‘korean clothing construction’. 8. The difficulties the highschool teachers faced while teaching Costume History were mostly that ‘the pictorials in the text is not fully explainable’, the next were ‘most of the supplementary teaching materials or implements are not owned’, ‘have to explain very much in a short time’, and ‘the lectural explanation is insufficient’. 9. The solution for the difficulties that the highschool teachers faced while teaching Costume History was mostly ‘the information, on which audio-visual materials and implements are distributed in the market, should be easy to obtain’, the next opinions were ‘the school should provide enough experiment and practice expenses to buy audio-visual materials and implements’, and ‘education facilities of the Home Economics Department should be the main aspects in improving the teaching methods and should give special lectures about it’.

• 대한의생명과학회지
• /
• 제26권3호
• /
• pp.230-237
• /
• 2020

Staphylococcus aureus (S. aureus) is known as a bacterium that can cause skin infections, respiratory system infections, and sinusitis; however, it can exist as a normal flora rather than a pathogen. Recently, methicillin-resistant S. aureus (MRSA) infections have emerged in the community as a new variant of community-associated (CA)-MRSA. In the present study, S. aureus and MRSA were isolated and cultured by collecting samples from facilities and environments where students and educational personnel have multiple contacts on university campuses; specifically, the nostrils and hands of college students were tested from July to September of 2019. The molecular properties of the isolated MRSA were analyzed, and the one MRSA strain was isolated from the university campuses. One MRSA that was isolated and cultured on campus was the mec complex group A and staphylococcal cassette chromosome (SCC) mec type II, which is a characteristic of healthcare-associated (HA)-MRSA, and SCCmec type V, which is a characteristic of CA-MRSA. This result was similar to other studies wherein the SCCmec type II was detected in SCCmec typing analysis in CA-MRSA. To confirm whether there is a new variant of CA-MRSA in the Republic of Korea, additional follow-up studies on the analysis of virulence factors of MRSA are needed by additionally separating CA-MRSA from the body parts of university students and educational personnel.