• 대한심미치과학회지
• /
• 제28권1호
• /
• pp.27-41
• /
• 2019

예지성 있는 대구치부 임플란트을 위해서는 Crestal bone Stabliity를 위해 임플란트 주위에 biologic width라 할 수 있는 적절한 두께의 연조직이 필요하다. 그러기 위해선 기존에 우리가 적절하다고 혹은 어쩔 수 없는 한계라고 생각했던 깊이보다 좀 더 치조골 하방으로 깊이 심어야 하는 경우가 많은 것 같다. 이번 투고에서는 case report와 함께 관련된 surgical technique에 대해서 소개하면서 구치부 임플란트의 수직적 위치에 대해서 생각보고자 한다.

• 한국의상디자인학회지
• /
• 제15권4호
• /
• pp.101-112
• /
• 2013

The purpose of this study was to evaluate the differences of the visual image on the variations in the waist position and the width of the wide pants. The stimuli were 9 samples: 3 variations of the waist position and 3 variations of the width of hem line. The data was obtained from 56 fashion students and analyzed by using Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of this study are as follows; 1. The visual evaluation by the waist position and the width of the wide pants is composed of 4 factors: attractiveness, physical characteristics, modesty, and personality. Among these factors, the attractiveness was the most important. 2. The high waist pants showed the most characteristic and soft under the condition that the width of the hem line was 98cm at the third stage, while the natural waist pants showed no characteristics and stiff in case the width of the hem line was 66cm at the first stage. 3. The first stage pants were simplest and modest in case the waist position was low, while the third stage pants were the most complicated and untidiest in case the waist position was natural. 4. The waist position and the width of the wide pants interacted with the physical characteristics and the modesty. 5. According to the MCA on the attractiveness and the personality, the width affected to the visual image of the wide pants than the waist position did.

• 복식문화연구
• /
• 제14권2호
• /
• pp.310-319
• /
• 2006

This study intended to compare and analyze marking efficiencies of tailored jacket based on different cloth and production conditions, 'the width of cloth', 'the number of marking pieces' and 'the direction for marking deployment'. The results were as follows. For the two pieces of markers, the efficiency of the cloth width of 110cm was higher than that of 150cm. As the number of markers increased, the efficiency of cloth width of 150cm was higher than that of 110cm. In the case of one-directional deployment, the results obtained was that the efficiency of two markers was higher than that of three markers, while, in the case of bi-directional deployment, the efficiency of three markers was higher than that of two markers. In the case of one-directional deployment for each size, the marking efficiencies were higher in two markers at the cloth width of 110 cm and higher in three markers at the cloth width of 150 cm. Then, in marking efficiencies according to the direction for marking deployment, bi-direction marker was the most efficient marker, followed by one-direction for each size marker and one-direction marker.

• 한국공간구조학회논문집
• /
• 제3권2호
• /
• pp.69-75
• /
• 2003

In case of rectangular lattice dome which shearing rigidity is very small, it has a concern to drop Buckling strength considerably by external force. So, by means of system to increase buckling-strength, there is a method of construction that lattice of dome is one with roof material. In a case like this, shearing rigidity of roof material increases buckling-strength of the whole of structure and can be designed economically from the viewpoint of practice. In case of analysis is achieved considering roof material that adheres to lattice of dame, there is method that considers the rigidity that use effective width frame as method to evaluate rigidity of roof material. therefore, this study is aimed at deciding effective width of roof material united with rectangular lattice dome to evaluate rigidity of roof material by effective width of frame and investigating how much does rigidity of roof material united with lattice of dome increase buckling-strength of the whole of structure according to rise-ratio. Conditions of loading are vertical-type-uniform loading. Analysis method is based on FEM dealing with the geometrically nonlinear deflection problems.

• 한국도로학회논문집
• /
• 제13권2호
• /
• pp.57-65
• /
• 2011

본 연구에서는 도시부도로의 곡선구간에서 주행차량의 횡방향 이격량을 분석하여 차량 주행에 필요한 최소 소요차로폭을 산정하였으며 본 연구결과와 선행연구에서 제시된 직선구간에서의 최소 소요차로폭을 비교 분석하였다. 이를 바탕으로 도로의 선형과 차종에 따라 곡선구간에서의 최소 소요차로폭을 제시하였다. 조사대상 곡선구간 도로의 차로폭은 2.79m~3.40m이다. 주행차량의 횡방향 이격량의 분포 및 조사대상 차량의 85%를 기준으로 누적분포를 분석하였다. 분석결과 곡선구간에서의 최소 소요차로폭이 소형차량의 경우 2.31m~2.58m, 대형차량의 경우 2.80m~3.27m로 산정되었다. 본 연구결과는 녹색교통 도입을 위한 공간, 도로공사 중, 소형차 전용도로의 건설 등에 활용될 수 있을 것이다. 또한 설계자의 목적에 따라 유연한 차로폭 설계기준의 적용에 필요한 기초적인 연구로 활용될 수 있을 것으로 기대된다.

• 한국자원식물학회지
• /
• 제18권3호
• /
• pp.367-373
• /
• 2005

본 연구의 목적은 쑥속 자원에 대한 생육인자간 상관성 구명과 생육인자 모형 개발을 위해 수행하였다. 생육인자의 특성에서 초장 초폭, 엽병장, 엽록소량은 더위지기, 엽장은 넓은잎외잎쑥, 엽폭은 쑥, 줄기직경은 뺑쑥, 엾두께는 더위지기, 쑥, 산쑥, 넓은 잎외잎쑥, 그늘쑥이 가장 높은 값을 나타냈다. 생육인자 간 상관분석 결과 사철쑥은 엽폭과 줄기직경, 산쑥은 초장과 초폭, 넓은잎외잎쑥은 초장과 엽폭, 나머지 종들은 엽장과 엽폭이 높은 상관성을 보였다. 생육인자 모형 분석 결과 사철쑥은 약 $79.4\%$, 쑥은 약 $91.7\%$, 산쑥은 약 $70.3\%$, 더위지기는 약 $49.0\%$, 넓은잎외잎쑥은 약 $72.5\%$, 그늘쑥은 약 $75.0\%$, 뺑쑥은 약 $60.4\%$, 덤불쑥은 약 $54.4\%$의 설명력을 나타내었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.921-924
• /
• 1995

Case hardening behavior of carbon tool steel(SK5) was investigated after pulsed YAG laser irradiation. In the case od beam passes,martensite formed in the melt zone and in former pearlite regions of the austenitization zone exhibits vary high Vickers hardness values. The molten depth and width decrease as the beam power density increase. The influence of depth and width of color painted specimen was also investigated. The molten zone of the black painted specimen was the largest. The were loss of the black painted specimen was smaller than any other painted or raw material.

• 한국인지과학회:학술대회논문집
• /
• 한국인지과학회 2000년도 춘계 학술대회
• /
• pp.247-251
• /
• 2000

This study examined relative importance of these factors by asking people to read the texts that was constituted with square and non-squre form letter and rank the preference of texts through conjoint analysis. In the case of reading time, font type was the most important factor, followed by leading , line width, font size, line length, justification, letter width in their order of impotance. And in the case of preference decision, font size was the most important factor, followed by font type, leading, line width, letter width, justification, line length. The result will be useful in understanding how to consider human preference in the Hangul typography.

• 한국정밀공학회지
• /
• 제11권2호
• /
• pp.173-181
• /
• 1994

A Cold spot temperature control system for the batch annealing furnace has been estabilished in order to reduce energy consumption to improve productivity and stabilize the propertics of products. Therefore we confirmed a relation between annealing cycle time and atmospheric gas, variation of coil cold spot temperature with time during heating and actual temperature measurements at mid-width of each coil during heating and actual temperature measurements at mid-width of each coil during soaking. The results of the tempaeature variation effect on the batch annealing are as follows. 1) Heating time is reduced to one half with increasing atmospheric gas flow rate and changing of atmospheric gas component from HNx to Ax gas, and annealing cycle time is reduced to 2.7 times. 2) In case of short time healing, the slowest heating part is the center of B coil, in case of long time heating, the low temperature point moves from the center of coil to inside coil. And the temperature in this part is higher than other parts when cooling. When finished heating, the cold spot is located 1/3 of coil inside in case of HNx atmospheric gas. But center of coil in case of Ax atmospheric gas. 3) The outside of top coil is the highest temperature point when heating, which becomes the lowest temperature point when cooling. So, this point becomes high temperature zone at heating and low temperature zone at cooling, It has relation according to atmospheric gas component and flow rate. 4) Soaking time at batch annealing cycle determination is made a decision by the input coil width, and soaking time for quality homogenization of 1214mm width coil must be 2.5 hours longer than that of 914mm width coil for the same ciol weight. 5) Annealing cycle time with Ax atmospheric gas is extended 1 hour in of slow cooling during 5 hours in order to avoid rapid cooling.

• 한국농공학회지
• /
• 제18권2호
• /
• pp.4096-4104
• /
• 1976

This experiment was carried out to investigate the efficient turning method which will be able to use every cutting methods, to calculate the width of the center field which must transpose from rotary cutting method to return cutting method, to investigate the effects of L/W and unit field on the operation efficiency. The results are summarized as follows: 1. In case of cutting in the outer field, the efficient turning method is the "$\alpha$" type turning method (half U-shaped turning method) at the first rotation, is the "$\beta$" type turning method (T-shaped turning method) at the second to fourth rotation. 2. In case of cutting in the inner field, the efficient turning method which takes the least turning time is the "a" type turning method ($\Delta$-shaped turning method). 3. The width of the center field (W') changes by the length-width ratio (L/W) and width (W), W' is 9.0m in case that L/W is 2.5 and W is 30m. 4. The larger L/W and area of unit field (A) become, the more operation efficiency (E) increases, and the limits that E is affected signicantly by L/W is 2 to 3.5 and A is within 5,000$m^2$. within 5,000$m^2$.