An experimental investigation was conducted to study the behavior of RC wide beam-column joints with slab subjected to reversed cyclic loads under constant axial load. Six half scale interior wide beam-column assemblies representing a portion of a frame subjected to simulated seismic loading were tested, including three specimens without slab and three specimens with slab. The primary variables were the ratio of column-to-beam flexural capacity ($M_r={\Sigma}M_c/{\Sigma}M_b$ ; 0.77~2.26), ratio of the column-to-beam width (b/H ; 1.54, 1.67). Test results are shown that (1) the current design code and practice for interior joints(type 2) are apply to the wide beam-high strength concrete column. (2) the presence of a slab have an effect on the performance of the wide beam-high strength concrete column interior joints(type 2). therefore in the design of the wide beam-high strength concrete column interior joints(type 2), the width of slab effective as a T beam flange should be considered. It was show that the case of the ratio of column-to-beam flexural capacity is more than 2.0, the effective width of slab are 2 times of an effective depth of wide beam, however if the ratio of column-to-beam flexural capacity is 1.4~2.0, the effective width of slab are not able to be considered.
The guano formed from the bat excrement in a cave contains various sulfate and phosphate minerals formed from the reaction of bat excrement with surrounding rocks and clastic minerals. Therefore, the mineral compositions in the guano provide basic informations on the geochemical environments affecting mineral formation in a cave. This study was conducted to study the mineral compositions of guano and the factors affecting those compositions by comparing mineralogical and chemical compositions in three different limestone caves in Korea. The guano samples in Gossi Cave contain detrital minerals such as illite, quartz and feldspar and relatively large amount of gypsum. The contents of gypsum increase with increasing depth, which is different from the samples collected in other caves. The samples collected from Baekryong Cave have the similar mineral compositions to those in Gossi Cave, but they also contain additional kaolinite and very small amount of gypsum. The samples in Sungryu Cave have similar mineralogical compositions to those in Gossi Cave, but contian bassanite instead of gypsum. The mineralogical compositions are well correlated with the chemical compositions of guano. The mineral compositions indicate that, in Gossi Cave, the minerals were formed by the reaction of large amount of bat excrement with surrounding rocks in high humidity condition or in the condition of frequent floods. In the case of Sungryu Cave, bassanite which can be formed in a dry condition indicates that minerals were formed in a relatively low humidity condition.
In this study MeV Si self ion implantations were done to reveal the intrinsic behavior of defect formation by excluding the possibility of chemical interactions between substrate atoms and dopant ones. Self implantations were conducted using Tandem Accelerator with energy ranges from 1 to 3 MeV. Defect formation by high energy ion implantation has a significant characteristics in that the lattice damage is concentrated near Rp and isolated from the surface. In order to investigate the energy dependence on defect formation, implantation energies were varied from 1 to 3 MeV under a constant dose of $1{\times}10^{15}/cm^2$. RBS channe!ed spectra showed that the depth at which as-implanted damaged layer formed increases as energy increases and that near surface region maintains better crystallinity as energy increases. Cross sectional TEM results agree well with RBS ones. In a TEM image as-implanted damaged layer appears as a dark band, where secondary defects are formed upon annealing. In the case of 2 MeV $Si^+$ self implantation a critical dose for the secondary defect formation was found to be between $3{\times}10^{14}/cm^24$ and $5{\times}10^{14}/cm^2$. Upon annealing the upper layer of the dark band was removed while the bottom part of the dark band did not move. The observed defect behavior by TEM was interpreted by Monte Carlo computer simulations using TRIM-code. SIMS analyses indicated that the secondary defect formed after annealing gettered oxygen impurities existed in silicon.
Journal of the Korean association of regional geographers
/
v.19
no.4
/
pp.641-653
/
2013
This study analyzed the location of manufacturing industries and works' residence in Yangsan city of which large part of industries were relocated from Busan metropolitan area along the industrial suburbanization process. Through the field survey, in-depth interview, and analysis of statistical data, the study tried to describe the relocation characteristics of manufacturing industries in Yangsan city. The results of the analysis are as follows: 1. The relocation rate of manufacturing industries from Busan to Yangsan was very high in 1980s. As a result of analysis, the first prime factor on relocation was the site problem for industrial land use. But for the newly starting industries, the most important factor was the subcontract networks among industries which differed from relocated ones. 2. The industrial suburbanization process influenced on the industrial structure strongly, as the compositional weight of rubber and plastic industries in Yangsan became greater and the size of the major plants got larger. 3. The manufacturing industries in Yangsan city were widely distributed on the main national industrial districts. Also, they were diffused out to the other places beyond the boundary of industrial districts. 4. The commuting workers' residence in Busan, employed by the plants of Yangsan marked 44.5%. That confirmed the strong influence of Busan labor market.
Park, Kyung-Woo;Ji, Sung-Hoon;Koh, Yong-Kwon;Kim, Geon-Young;Kim, Jin-Kook
Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
/
v.6
no.4
/
pp.283-296
/
2008
The numerical simulations for groundwater flow were carried out to support the input parameters for safety assessment in LILW repository site. As the input parameters for safety assessment, the groundwater flux into the underground facilities during construction, flow rate through the disposal silo after closure of disposal silo and flow pathway from the disposal silo to discharge area were analyzed using the 10 cases groundwater flow simulations. From the total 10 numerical simulation results, the statistics of estimated output were similar to among 10 cases. In some cases, the analyzed input parameters were strongly governed by locally existed high permeable fracture zone at radioactive waste disposed depth. Indeed, numerical simulation for well scenario as a human intrusion scenario was carried out using the hydraulically severe case model. Using the results of well scenario, the input parameters for safety assessment were also obtained through the numerical simulation.
The purposes of this study is to identify the professional knowledge of the three elementary teachers for science-gifted students in teaching method. All teachers have received in-service program in gifted education, and have been recommended by their colleagues. Two teachers have instructed the gifted for more than five years, one teacher have instructed the gifted for one year and the general students for eleven years. For for this study, each teacher's lesson plans were collected, videotapes were recorded during lessons, and in-depth interview for each participant were conducted. All recoded data were transcribed and analyzed. Some unique characteristics of teaching method for the gifted were identified from the class instruction of participants. They had knowledge of teaching model for the gifted, especially Renzulli's three pod enrichment model. And they mainly used the materials developed by KEDI for the gifted. Also they had capability to be able to reconstruct them, but their lesson plans did not be realized well in their class. Some implications from findings of this study were suggested, such as teaching methods to improve the quality in the classes of the gifted in science.
Purpose : The purpose of this study was to describe a total pain model in patients with terminal cancer and to identify factors relating to total pain using the Twycross Pain Management Model, which included physical, psycho-social and spiritual pain. Method : The study was a retrospective descriptive study. The first stage included 87 patients who received hospice service at Y hospital in 1997. The second stage included five model patients who suffer severe pain as selected by the four hospice nurses. Data collection was from 1) chart analysis and 2) in-depth interviews with the hospice nurses about their selected patients. Data analysis was performed using SPSS-WIN and content analysis. Result : 1) The main problems of 3 patient with terminal cancer were pain(77%), constipation (25.3%), family coping(35.6%), psycho-spiritual distress(17.2%)and other symptoms. 2. The Twycross model was a useful model. However, new items were added; loneliness, depression, and no improvement in condition as depression factors. In anger, new items were anger due to family neglect, at God and in relationships. The case studies identified the followsing; 1) Patient suffer from physical pain as well as multiple other symptoms when cancer is advanced. 2) Body concept, role change, threat to self concept, fear of pain, fear of death, anxiety, family conflict, financial burden, spiritual distress, hope for a cure, are all affected. Conclusion : 1) It is believed that the Twycross model is useful but further tests and revisions are necessary for deciding priorities in the care plan. 2) Pain management must improve culturally appropriate and family support, psychological, spiritual care are imperative for patient with terminal cancer. 3) Further study is recommended to test correlations of depression, anxiety, spiritual distress and family coping using valid instruments. A qualitative study on the spiritual journey of the patient with terminal cancer is also recommended.
Park, Sung Woo;Park, Seung Su;Hwang, In Baek;Cha, Chul Joon
Journal of the Korea institute for structural maintenance and inspection
/
v.16
no.5
/
pp.19-28
/
2012
In this study, cause of longitudinal crack which is found on duct slab of road tunnel is studied. In-depth investigation, such as visual inspection, non-destructive testing and geometrical surveying of duct slab, is carried out. In order to perform cause analysis, the investigated results are compared to the results of numerical analysis. Many factors, which cause longitudinal crack, are classified as constrained condition of the duct slab, location of the rebar, temperature, shrinkage and so on. According to the classified causes of longitudinal crack, numerical analysis is performed considering construction stage of the tunnel lining. Especially, in order to predict shrinkage stain due to discrepancy of curing date, ACI-209 model, KCI structural design code and other researcher's shrinkage test results are compared. The results show that shrinkage strain is one of the main factors causing longitudinal crack. Other investigated tunnels are classified along with the construction method of duct slab and patterns of cracks. As a result, improving ways to construct duct slab are suggested.
Journal of the Korea Academia-Industrial cooperation Society
/
v.15
no.8
/
pp.4831-4843
/
2014
Magazines on specific genres have been operating collaborative, co-working and collective production systems for value maximization using an adaptation strategy on the dynamic, complex and uncertain value network of the magazine industry. The study used a case study method, and data collection was performed by observational research, depth interviews and survey research. The subjects of the study were 'magazine industry', 'magazine firm and community', and 'collaboration system within creative users'. According to the research results, the ecosystem of magazines on a specific genre has been evolving into an innovative value network system, which is combined with the magazine firm, community users and magazine platform. Second, the rapid introduction of smart device environment changes the way of the collaborating system, in which an action and interaction came out within the community, creative users and magazine firms. Third, the production agency shows strong action and interaction, which fits the magazine platform within the ecosystem of a magazine on a specific genre well. This model has a similar fractal structure to the game, publishing, drama, movie, comic, and animation contents industry, converging to an innovative technology-based-creative-industry.
The purpose of this study was to develop a theory appropriate to the context by identifying the career motivation formation process from the perspective of academic high school students using a grounded theory approach. In this study, participants were selected among non probability sampling was used for sampling by artificially reputational case selection methods. Forty two highschool students(21 male, 21 female) were participated in this study. Research data were collected mainly collected using in-depth interview data were analyzed by applying the grounded theory method of Strauss and Corbin (1998). According to the results, 319 concepts and 56 sub-categories, and 19 categories were derived n the open coding process. Academic high school students' formation of STEM career motivation were influenced by contextual conditions of "STEM-related career think that the instruments' causal conditions and 'STEM education experience in inside and outside of school' named 'STEM career understanding and self-understanding' using the strategy of being influenced in interventional conditions of social support and obstacle 'for the central phenomenon of "STEM efforts to achieve career goals, it appeared as a result of" satisfaction for STEM careers. And it had a 5-step process over time that the formation process of STEM career motivation. This is expected to provide homes, schools, communities, and contribute to have a new insight on the education of the country, given the direction of career education and counseling intervention and the basic data used to develop and apply STEM career education.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.