• Steel and Composite Structures
• /
• 제16권5호
• /
• pp.455-480
• /
• 2014

Sixteen concrete filled square CFRP-steel tubular (S-CFRP-CFST) stub columns under axial compression were experimentally investigated. The experimental results showed that the failure mode of the specimens is strength loss of the materials, and the confined concrete has good plasticity due to confinement of the CFRP-steel composite tube. The steel tube and CFRP can work concurrently. The load versus longitudinal strain curves of the specimens can be divided into 3 stages, i.e., elastic stage, elasto-plastic stage and softening stage. Analysis based on finite element method showed that the longitudinal stress of the steel tube keeps almost constant along axial direction, and the transverse stress at the corner of the concrete is the maximum. The confinement effect of the outer tube to the concrete is mainly focused on the corner. The confinements along the side of the cross-section and the height of the specimen are both non-uniform. The adhesive strength has little effect both on the load versus longitudinal strain curves and on the confinement force versus longitudinal strain curves. With the increasing of the initial stress in the steel tube, the load carrying capacity, the stiffness and the peak value of the average confinement force are all reduced. Equation for calculating the load carrying capacity of the composite stub columns is presented, and the estimated results agree well with the experimental results.

• 대한인간공학회지
• /
• 제26권4호
• /
• pp.49-56
• /
• 2007

Handles on objects are very important to increase the safety and efficiency of manual handling of people who use them. In this study, four different prototype cartons combined with auxiliary handles were designed to determine the optimal handle position of cartons through the evaluation of user preferences. Twenty male students are participated in the experiment. Likert-5 point summated rating method was applied to evaluate the user preferences for provided handles of the carton among upper, middle, and lower position under the four different sizes and materials handling conditions(carrying positions). The results show that the subjects preferred upper part of the handle on the small cartons regardless of the carrying positions while upper and middle parts of the handle on the big cartons for handling above the waist height were preferred. An optimal handle position depending on the different sizes of carton and the different carrying positions were recommended based on the results of evaluation. It is thus recommended that the cartons provide handles on its relevant position depending on the size and materials handling condition to reduce the musculoskeletal stress and in turn to increase the user satisfaction.

• Archives of Pharmacal Research
• /
• 제27권12호
• /
• pp.1263-1269
• /
• 2004

The objective of this study was to characterize immunoliposomes carrying plasmid DNA with optimal encapsulation efficiency and antibody density. Plasmid DNA was encapsulated by the freezing/thawing method into liposomes composed of POPC (1-palmitoyl-2-oleoyl-sn-glycerol- 3-phosphocholine), DDAB (didodecyl dimethyl ammonium bromide), DSPE-PEG 2000 (distearoyl phosphatidyl ethanolamine polyethylene glycol 2000) and DSPE-PEG 2000-maleimide. The liposomes carrying plasmid DNA were extruded through two stacked polycarbonate filters, of different pore size, to control the liposome size. Then, rat IgG molecules were conjugated to the liposomes. The immunoliposomes containing plasmid DNA were separated from the free plasmid DNA and unconjugated IgG by Sepharose CL-4B column chromatography. The DNA amount encapsulated was affected by DDAB (cationic lipid) concentration, the initial amount of plasmid DNA between 10 ${\mu}g$ and 200 ${\mu}g$, the total lipid amount and plasmid DNA size, but not significantly by liposome size. By varying the ratio of DSPE-PEG 2000-maleimide to IgG, the number of IgG molecules per liposome was changed significantly.

• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.119-125
• /
• 2017

In this paper, the characteristics and load carrying capacity of square pocket surfaces on a slider bearing are discussed for the thin film effect by the square pocket slider bearing. To study the lubrication, a Reynolds equation is used in this paper for the analysis of the slider bearing characteristics with square pocket surfaces. For numerical analysis, the central differencing scheme finite difference method is used. In a slider bearing with square pocket surfaces, the simulation dependent parameters such as pressure and load carrying capacity of the bearing can be acquired from the independent parameters, the slope of the slider bearing and number of pockets on the upper slider. These results can be acquired by the programmed softwar,e and they can be analyzed and stored in a sequential data file for later analysis. Furthermore, their pressure and load capacity distribution can be displayed easily by using the developed program with the Matlab GUI.

• 한국육종학회지
• /
• 제43권4호
• /
• pp.241-251
• /
• 2011

Bacterial blight(BB) caused by Xanthomonas oryzae pv. oryzae(Xoo) is one of the most economically destructive bacterial diseases of rice in worldwide. Utilization of resistant cultivars carrying resistant gene(s) is relatively an effect method to control this disease. About 34 resistant genes for BB resistance have been identified in many countries. Among them, Xa1 and Xa3 genes against bacterial blight have been incorporated into improved korean japonica rice varieties. Now, Ilmi carrying Xa1 gene and severial cultivars carrying Xa3 gene are widely grown in our country. In recent year, xa5, Xa21 and Xa23 genes are using in rice breeding programs for japonica resistant cultivars to bacterial blight. Resistant cultivars incorporated with a diverse single gene and two, three, or the more major gene necessite in the future.

• 한국화재소방학회논문지
• /
• 제22권3호
• /
• pp.239-245
• /
• 2008

본 연구에서는 현재 위험물 수송용 탱크 화차에 대하여 수행되고 있는 구조해석 방법에 대한 문제점을 보완하기 위하여 국내에서 운행중인 위험물 수송용 탱크차의 종류와 특성을 조사하고 그 중 아스팔트 탱크화차의 비압력식 탱크에 대하여 탱크 화차의 구조적 특성을 고려하는 유한요소법을 이용한 구조적 강도평가 방법을 제시하였고 이를 위하여 JIS E 7102에 기술되어있는 탱크화차의 강도설계를 위한 실차 시험방법 절차를 유한요소법으로 구현하여 해석하였다. 그 결과 탱크를 지지하는 새들과 탱크와의 접촉부에서 최대응력이 발생하였으나 이는 JIS 규격에서 제시하는 평가기준을 초과하지 않았다. 이로써 아스팔트 탱크화차의 탱크는 충분한 구조적 강도를 갖고 있다는 결과를 도출하였다.

• Journal of Welding and Joining
• /
• 제33권6호
• /
• pp.49-54
• /
• 2015

Welding process is of importance to assemble products or structures, but also the process is structural weakness due to stress concentration in welding joint. The fatigue design of welded joint requires time & labor consuming fatigue test because the fatigue life is various according to the depth of joint, joint type and load type etc. In fatigue design codes, they guide to classify welding joints with their shape( BS7608, IIW Documents) and provide fatigue assessment information. In terms of numerical method for fatigue analysis, it is also difficult to decide the stress peak in joint because of mesh sensitivity which means that stress value is varies with element type or size on stress concentration zone. Hot-spot method is used generally, but Battelle of United States proposed Master S-N Curve based on structural stresses converted by mechanical equilibrium theory. In this research, we extracted master S-N curve from Battelle's fatigue test DB including test data of various welding joints to apply on Non-Load-Carrying cruciform Joint. Comparing fatigue results between the case of using normal stress and case of structural stress cor the cruciform Joint, The suggested Battelle method showed successive results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.113-115
• /
• 2001

In order to design the power appratus such ac bus bar, the current carrying ampacity should be determined, Since it is limited by maxium operating temperature, it is very important to predict temperature-rise on it. The main causes to raise temperature are joule's loss in the current carrying conductor and induced circulating and eddy current in the tank. The heat transfer is divided into convection and radiation on boundary, determining convection heat transfer coefficient is not easy. This paper propose a new technique that can be used to estimate the temperature rise in the extra high voltage bus bar. The heat transfer coefficient is analytically calculated by applying Nusselt Number depending on temperature as well as model geometry. The analytic method which use heat transfer coefficient is coupled with finite element method. The temperature distribution in the bus bar by the proposed method shows good agreement with experimental data.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.187-190
• /
• 1998

In this paper, a synchronization method of OFDM signals are introduced and its performance is estimated. A proposed method can perform a frame/symbol timing, carrier frequency synchronizations. Reference symbols consist of two duplicate OFDM symbols carrying signals on every sub-carriers. Performances of synchronization under 60GHz millimeter-wave indoor channels are evaluated, which were measured with frequency-sweeping method in common office buildings. A proposed method has improved performances owing to long averaging durations of synchronization metrics in frame/symbol timing, carrier frequency synchronization procedures.

• 한국강구조학회 논문집
• /
• 제13권5호
• /
• pp.477-492
• /
• 2001

현재교량의 절반 가량이 성능이 저하되어 보수 보강이 요구되고 있는 실정인데 이들 교량은 제 기능을 발휘하지 못하거나 소요강도에 미달되는 경우가 있다. 필요이상의 보수보강비용 또는 재거설의 비용의 투입을 피하기 위하여 현재 상태의 내하력이 정확히 평가되어져야 한다. 교량의 평가방법으로 허용응력 평가법 (ASD) 하중계수평가법 (LFD) 하중저항계수평가법 (LRFD) 등이 현재 사용되고 있다. 본 논문에서는 허용응력 평가법 (ASD) 하중계수평가법 (LFD) 하중저항계수평가법 (LRFD)등이 비교되고 실제 교량에 적용된 하중실험의 자료들을 모았다. 그리고 하중실험의 교량평가 결과와 이론에 의한 교량평가 결과의 차이점에 대해 연구하였다. 그리고 기존에 존재하는 교량에 ASD, LFD 그리고 LRFD 방법을 적용 비교하여 어느 수준에 해당되는지를 비교 검토하였다.